VIP Sensors

The VIP Sensors Model 1006A is a small triaxial piezoelectric accelerometer designed for vibration measurement in three orthogonal axes. Its light weight (17 grams) minimizes massloading. The accelerometer is a self-generating device that requires no external power source for operation. The transducer features three 10-32 receptacles for output connection and is typically screw mounted. The Model 1006A utilizes the PZT-5 crystal material, exhibiting stable output sensitivity over the operating temperature range. Signal ground is connected to the case of the unit. Low-noise, flexible coaxial cables are used for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer.

The VIP Sensors Model 1010A is a miniature piezoelectricaccelerometer for vibration measurement on mini-structures and small objects. Its light weight of 1.2 grams effectively minimizes mass loading. The accelerometer is a self-generating device that requires no external power source for operation.The Model 1010A exhibits a broad frequency response range anda high resonance frequency. It utilizes a piezoelectric crystalmaterial that exhibits stable output sensitivity over the operating temperature range. The accelerometer features a M3 connector for low-noise, flexible coaxial cables that are used for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 arerecommended for use with this high impedance accelerometer.

The VIP Sensors Model 1011A is a miniature piezoelectric accelerometer for vibration measurement on mini-structures and small objects. Its light weight of 1.2 grams (without the integral low-noise cable) effectively minimizes mass loading. The accelerometer is a self-generating device that requires no external power source for operation.The Model 1011A exhibits a broad frequency response range and a high resonance frequency. It utilizes a piezoelectric crystal material that exhibits stable output sensitivity over the operating temperature range. Low-noise, flexible coaxial cables are used for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer

The VIP Sensors Model 1012A is a miniature piezoelectric accelerometer for vibration and shock measurements. Its light weight effectively minimizes mass loading. The accelerometer is a self-generating device that requires no external power source for operation.The Model 1012A exhibits a broad frequency response range and a high resonance frequency. It utilizes a piezoelectric crystal material that exhibits stable output sensitivity over the operating temperature range. Low-noise, flexible coaxial cables are used for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer.

The VIP Sensors Model 1013A is a stud mounted piezoelectric accelerometer designed for general vibration measurement on structures and objects. The sensor design is sealed against external contamination. The accelerometer is a self-generating device that requires no external power source for operation. The Model 1013A exhibits high resonance frequency. Signal ground is connected to the outer caseof the unit. When used with an isolated mounting stud, the accelerometer is electrically isolated from ground. The accelerometer features a 10-32 side connector that is used with low-noise coaxial cable for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer.

The VIP Sensors Model 1014A is a stud mounted piezoelectric accelerometer designed for general vibration measurement on structures and objects. The sensor design is sealed against external contamination. The accelerometer is a self-generating device that requires no external power source for operation. The Model 1014A exhibits high resonance frequency. Signal ground is connected to the outer caseof the unit. When used with an isolated mounting stud, the accelerometer is electrically isolated from ground. The accelerometer features a 10-32 topconnector that is used with low-noise coaxial cable for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer.

The VIP Sensors Model 1015A is a small, stud mounted piezoelectric accelerometer designed for general vibration measurement on structures and objects. The sensor design is sealed against external contamination. The accelerometer is a self-generating device that requires no external power source for operation. The Model 1015A exhibits high resonance frequency. Signal ground is connected to the outer caseof the unit. When used with an isolated mounting stud, the accelerometer is electrically isolated from ground. The accelerometer features a 10-32 topconnector that is used with low-noise coaxial cable for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer.

The VIP Sensors Model 1017A is a small piezoelectric accelerometer for vibration measurement on small structures and objects. Its light weight of 2.8 grams (without the low-noise cable) effectively minimizes mass loading. The accelerometer is a self-generating device that requires no external power source for operation.The Model 1017A exhibits a broad frequency response range and a high resonance frequency. Low-noise, flexible coaxial cables are used for error-free operation. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer.

The VIP Sensors Model 1021A is a miniature piezoelectric accelerometer designed for shock and vibration measurementson small structures and objects. Its light weight minimizes or eliminates any mass loading effects on the object being tested. The accelerometer is a high-impedance, self-generating device that requires no external power source for operation. The Model 1021A incorporates a thru-hole mounting design that allows for cable orientation in any direction. The unit is sealed against external contamination. Signal ground is connected to the outer case of the unit. The accelerometer features a M3 connector that is used with low-noise coaxial cable for connecting to signal conditioning electronics. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer.

The VIP Sensors Model 1021B is a miniature piezoelectric accelerometer designed for shock and vibration measurements on small structures and objects. Its mass of only 1.4 grams minimizes or eliminates any mass loading effects on the object being tested. The accelerometer is a high-impedance, self-generating device that requires no external power source for operation. The Model 1021B incorporates a thru-hole mounting design that allows for cable orientation in any direction. The unit is sealed against external contamination. Signal ground is connected to the outer caseof the unit, but can be electrically isolated from ground when used with an isolated mountingbolt. The accelerometer features an integral cable with a 10-32 plug for connecting to signal conditioning electronics. VIP Sensors Signal Conditioner Models 5002 and 5005 are recommended for use with this high impedance accelerometer.