Washington Crane & Hoist

Increased load carrying capacity and track life - the lower section of Tarca track is specially rolled from high carbon billet and welded to a structural steel web and top flange. This construction of the track increases its load carrying capacity while retaining its non-peening qualities and significantly increasing track life. Peening - gradual movement of metal by the rolling action of wheels. The metal moves to one or both sides of the rail, depending on the rail design, and is the chief source of wear. Raised tread stays flat and smooth - raised tread design allows metal to flow in both directions when repeatedly subjected to a rolling load; the tread stays flat and smooth allowing for easy rolling of loaded wheels. Maximum strength, maximum rigidity, and greater safety - the high carbon alloy steel rail is joined by a carefully controlled welding process which means maximum strength and rigidity and greater safety. Standardized rail widths - the most distinguishing feature of patented rail is that a rail of uniform width can be maintained over a wide range of beam depths and carrying capacities. This uniformity provides a basis for standardization not only in trolleys and end trucks, but also in interlocks, electrification brackets, and other accessories. A better installation, faster - overall track depth is held to close tolerances. Flange and rail are held square with the web. This accuracy eliminates time consuming shimming and fitting during erection. Systems fit neatly together for smooth, quiet operation.

Monorail crane systems are available in capacities that will meet your requirements. We design and manufacture our monorail products in accordance with industry specifications and are manufactured with quality materials and components that provide years of service with the maximum amount of system uptime.

The Dictionary Defines Inspection As "Careful Investigation; Critical Examination"; However, Not Every Overhead Crane System Inspection Is The Same Some inspection companies define an inspection as "walking around your shop floor, performing an operational test of your overhead crane system and then giving you a piece of paper showing that your system has been inspected". There are a few things missing from their inspection! They do not go up in the air where the equipment is They do not remove covers to inspect brakes and limit switches They do not check lubrication levels or operating mechanisms They do not check structural components They do not check bolted and welded connections They do not check safety features At Washington Crane & Hoist Company, "inspection" is more than a word. Our Inspection Program covers every operating mechanism, all wear items, safety features, structural components, bolted and welded connections and code compliance. Our inspectors remove component covers to inspect brake operation and adjustment, hoist limit switch function and proper lubrication of all gearboxes, wire rope and load chain. When our inspections are completed, you will receive a detailed report. You can be assured that you will have a thorough understanding of the condition of your equipment from the perspective of safety, compliance and reliability. A crane system inspection is more than a piece of paper to show the State Inspector and goes beyond Code Compliance. The real value of an inspection is increased safety, reduced liability exposure and an awareness of maintenance issues that could contribute to unplanned shutdowns. Inspection of your overhead crane system is a basic requirement covered by State and Federal Code. We believe a thorough inspection is a basic requirement for protecting your employees, your investment and your production line.

Gantry crane systems are available in single or double girder designs with capacities and spans that will meet your requirements. We design and manufacture our gantry crane products in accordance with industry specifications and are manufactured with quality materials and components that provide years of service with the maximum amount of system uptime.

Washington Crane & Hoist Company has installed hundreds of magnetic, frequency drive and PLC control systems. Call today for more information on how we can assist you with your control requirements. Electrical Enclosures to meet NEMA standard specifications Magnetic, frequency drive and PLC control systems Radio Remote Controls Control upgrades for existing equipment Frequency drive upgrades Control design assistance Complete stock of control components and replacement parts

Providing a safe workplace for your employees is at the core of any material handling program. State and Federal Agencies have established regulations and codes for inspections, operator training and preventative maintenance for overhead crane systems. We can provide you with the proper documentation to prove compliance and assist you with specific training programs for your equipment operators to identify unsafe conditions to remain compliant. Beyond code compliance, providing a safe workplace limits corporate liability exposure in the event of an accident involving overhead crane systems. If your company has met the minimum code requirements, provided operator training for your employees and provided a safe workplace, your liability exposure should be minimized. From code compliance and documentation to operator training, Washington Crane & Hoist Company can assist your company to maintain a safe workplace.

Washington Crane & Hoist Company offers a complete line of below-the-hook lifting devices. We can provide lifting devices from a number of quality manufacturers, such as, Anver®, Bushman Equipment, Inc., Caldwell® and UniMove or engineer and fabricate custom devices for your particular application. Lifting Beams Spreader Beams Coil Lifters Vacuum Lifters Sheet Lifters Pallet Lifters Rotating Crane Hooks Lifting Tongs Crane Stackers Chain and Wire Rope Slings

Our Remanufactured Hoists Offer: A 1-year warranty for parts and labor A cost savings over similar new equipment In stock for immediate shipment Remanufacturing Includes: Unit is completely disassembled All bearings are replaced Gearbox grease and gasket are replaced Unit is reassembled with any additional parts requiring replacement to return unit to factory specifications Unit is repainted Unit is load tested and furnished with load test certification

Bridge crane systems are available in single or double girder designs with either top or under running end truck configurations with capacities and spans that will meet your requirements. We design and manufacture our bridge crane products in accordance with industry specifications and are manufactured with quality materials and components that provide years of service with the maximum amount of system uptime.

Washington Crane & Hoist Company stocks a full range of material handling electrical products. From runway electrification to cable reels, we can assist you with all of your electrical needs. UL listed flat cable festoon conductor systems for monorails, bridges and runways UL listed runway conductor bar electrification systems Electrical enclosures to meet NEMA standard specifications Tagline systems Cable reels Spark and corrosion resistant systems Complete stock of electrical components and replacement parts