Post Buy Requirement
RG
Nagpur, Maharashtra, India
Add Review

Other Products / Services

Pocket Mate Reader


Overview


Portable and lightweight, the ACR38U PocketMate II Smart Card Reader is a USB-sized device that transforms into a smart card reader for full-sized contact smart cards with just a single swivel motion.


With its MicroUSB OTG interface, it supports most smartphones and tablets, and can be easily integrated with any mobile device running on the Android platform versions 3.1 and above. Additionally, it may be used with Windows, Linux, or Mac operating systems, because of its PC/SC and CCID compliance.


It can run applications that use full-sized contact smart cards and meets security requirements in various fields, including m-Commerce.


ACR38U PocketMate II supports ISO 7816 Classes A, B, and C smart cards (5V, 3V, and 1.8V), microprocessor cards with the T=0, T=1 protocol, and common memory cards. It has a smart card read/write speed of up to 344 Kbps.


This small device proves to be a powerful smart card reader, as it houses the ACR38 core, which has been proven to support highly demanding smart card applications. Built with a modern and functional design, the ACR38U PocketMate II is a smart card reader that is particularly recommended for frequent travelers who need to complete transactions securely on the road.




Feature



  • Supports ISO 7816 Class A, B and C (5 V, 3 V, 1.8 V) cards

  • Supports microprocessor cards with T=0 or T=1 protocol

  • Supports memory cards:

    • Cards following the I2C bus protocol (free memory cards), including:

      • Atmel: AT24C01 / 02 / 04 / 08 / 16 / 32 / 64 / 128 / 256 / 512 / 1024

      • SGS-Thomson: ST14C02C, ST14C04C

      • Gemplus: GFM1K, GFM2K, GFM4K, GFM8K



    • Cards with intelligent 256 bytes EEPROM and write protect function, including: SLE4432, SLE4442, SLE5532, SLE5542

    • Cards with intelligent 1K bytes EEPROM and write-protect function, including: SLE4418, SLE4428, SLE5518, SLE5528

    • Cards with 104 type of EEPROM non-reloadable token counter cards, including: SLE4406, SLE4436, SLE5536, SLE6636

    • Cards with secure memory IC with password and authentication, including: AT88SC153, AT88SC1608

    • Cards with Intelligent 416-Bit EEPROM with internal PIN check, including: SLE4404

    • Cards with Security Logic with Application Zone, including: AT88SC101, AT88SC102, AT88SC1003



  • Supports PPS (Protocol and Parameters Selection)

  • Features Short Circuit Protection

  • Application Programming Interface:

    • Supports PC/SC

    • Supports CT-API (through wrapper on top of PC/SC)







Application



  • Mobile Banking & Payment

  • e-Healthcare

  • e-Purse & Loyalty




Tech-Specs









































Dimensions 58.0 mm (L) x 20.0 mm (W) x 13.7 mm (H)
Interface MicroUSB (OTG) Full Speed
Supply Voltage Regulated 5V DC
Supply Current Max. 50mA
Operating Temperature 0-50C
CLK Frequency 4 MHz
Smart Card Interface Support ISO 7816 Class A, B and C ( 5 V, 3 V, 1.8 V )
Compliance / Certifications

  • EN60950/IEC 60950, ISO 7816, FIPS 201, TAA, CE, FCC, VCCI, PC/SC, CCID, EMV 2000 Level 1, RoHS, USB Full Speed

  • Microsoft WHQL: 2000, XP, Vista, 7, 8, Server 2003, Server 2008, Server 2008 R2, Server 2012


Operating System Support

  • Win98, Win ME, Win NT 4.0, Win 2000, Win 2003, Win 2003 R2, Win XP, Win Vista, Win 2008, Win 7, Win 8

  • Win 2003 x64, Win 2003 R2 x64, Win XP x64, Win Vista x64, Win 2008 x64, Win 2008 R2 x64, Win 7 x64, Win 8 x 64, Win 2012 x64

  • Mac

  • Linux

  • Android 3.1 and above





View Complete Details

Standalone Contactless Reader

As contactless smart card technology becomes widely accepted in the market, integration of different components in a single device offers security and convenience sought after in many applications.


The ACR1283L is a cost-effective and powerful contactless smart card reader designed to operate in standalone mode to cater to a wide range of contactless card applications. It comes with four built-in SAM slots, making it suitable for applications that have multiple card issues or different security requirements. ACR1283L enriches user interaction with its two-line graphic LCD, four LEDs, buzzer to clearly display application and card operation status, and a twelve-key capacitive touch keypad for user input. In addition to its standalone operation, The ACR1283L also supports PC-linked operation for typical contactless PC/SC host applications.


With its high speed 32-bit MCU and strong antenna performance, ACR1283L is ready for highly secure and highly demanding applications where speed and security are essential, such as payment and government applications. An all-in-one, cost-effective and powerful terminal designed to provide greater flexibility and convenience, ACR1283L is the smart choice for your smart card applications!




Feature

  • ARM 32-bit CortexTM-M3 Processor

  • Dual Operation Modes:

    • PC-linked

    • Standalone



  • PC-linked Operation:

    • USB 2.0 Full Speed Interface

    • CCID Compliance

    • Supports PC/SC

    • Supports CT-API (through wrapper on top of PC/SC)



  • Standalone Operation:

    • Support for third-party application programming

    • Over 400 KB memory space for third-party application

    • Over 500 KB memory space for data storage

    • Supported development platforn:

      • IAR Embedded Workbench, Version 5.50 or above

      • CoIDE(GCC), Version 1.3.0 or above





  • Smart Card Reader:

    • Read/Write speed of up to 848 kbps

    • Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type)

    • Support for ISO 14443 Part 4 Type A and B and Mifare series

    • Built-in anti-collision feature (only one tag is accessed at any time)

    • Four ISO 7816 compliant SAM slots



  • Built-in Peripherals:

    • Two-line graphic LCD

    • Four user-controllable LEDs

    • User-controllable buzzer

    • Twelve-key capacitive touch keypad



  • Real-time clock (RTC) with independent back up battery

  • In-device AES (128 and 256), DES and 3DES encryption

  • USB Firmware Upgradability





Application



  • e-Government

  • Banking & Payment

  • Access Control

  • Network Security

  • e-Purse & Loyalty

  • Transportation



Tech-Specs





















































Dimensions Main Body: 133.4 mm (L) x 88.4 mm (W) x 20.9 mm (H)
With Stand: 158.0 mm (L) x 95.00 mm (W) x 95.0 mm (H)
Weight Main Body: 185 g
With Stand: 420 g
Processor ARM 32-bit CortexTM-M3 Processor
Interface USB Full Speed
Operating Distance Up to 50 mm (depends on the tag type)
Supply Voltage Regulated 5V DC
Supply Current 500 mA (max.)
Operating Temperature 0-50C
Operating Frequency 13.56 MHz
Smart Card Interface Support

  • ISO 14443 Type A & B

  • Mifare


Compliance / Certifications

  • ISO 14443, CE, FCC, PC/SC, CCID, RoHS, USB Full Speed

  • Microsoft WHQL 2000, XP, Vista, 7


Operating System Support

  • Win 2000, Win XP, Win Vista, Win 7, Win Server 2003, Win Server 2008

  • Win XP x64, Win Vista x64, Win 7 x64, Win Server 2003 x64, Win Server 2008 x64, Win Server 2008 R2 x64

  • Linux

  • Mac

  • AndroidTM 3.1 and above





View Complete Details

Nfc Reader

The ACR122S NFC Contactless Smart Card Reader is the serial interface reader in the ACR122 family developed based on the 13.56 MHz Contactless (RFID) Technology and compliant with the ISO/IEC 18092 Standard for Near Field Communication (NFC). It supports Mifare, ISO 14443 Type A and B, and all four types of NFC tags.


ACR122S is a plug and play device which does not require any driver installation. It comes with a built-in ISO 7816 SAM slot for enhanced security, plus a buzzer and two LEDs for rich user interaction. The reader can also read and write faster and more efficiently by making use of up to 424 Kbps for tag access. The proximity operating distance of ACR122S is up to 5 cm, depending on the type of tag in use.


ACR122S is also available in module form for easy integration into bigger machines, like POS terminals, physical access devices and vending machines. Typical applications of the ACR122S reader include e-payment, e-ticketing for events and mass transit, toll road fare collection and network authentication.




Feature



  • Serial RS-232 Interface: Baud Rate = 115200 bps, 8-N-1

  • USB interface for power supply

  • CCID-like fram format (Binary format)

  • Smart Card Reader:

    • Read/Write speed of up to 424 kbps

    • Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type)

    • Support for ISO 14443 Part 4 Type A and B cards, Mifare, FeliCa, and all four types of NFC (ISO/IEC 18092 tags)

    • Built-in anti-collision feature (only one tag is accessed at any time)

    • ISO 7816-compliant SAM slot



  • Built-in Peripherals:

    • Two user-controllable LEDs

    • User-controllable buzzer







Application



  • e-Government

  • Banking & Payment

  • Access Control

  • Network Security

  • e-Purse & Loyalty

  • Transportation



Tech-Specs

















































Dimensions 120.5 mm (L) x 72 mm (W) x 20.4 mm (H)
Weight 148 g
Interface RS232 for data communication, USB for power transmission
Operating Distance Up to 50 mm (depends on the tag type)
Supply Voltage Regulated 5V DC
Supply Current 200 mA (operating); 50 mA (standby); 100 mA (normal)
Operating Temperature 0 50 C
Operating Frequency 13.56 MHz
Smart Card Interface Support ISO14443 Type A & B
Mifare
FeliCa
4 types of NFC (ISO/IEC18092) tags
Compliance / Certifications ISO 14443, CE, FCC, KC, VCCI, RoHS
Operating System Support Win 98, Win ME, Win 2000, Win XP, Win Vista, Win 7, Win Server 2003, Win Server 2008
Win XP x64, Win Vista x64, Win 7 x64, Win Server 2003 x64, Win Server 2008 x64, Win Server 2008 R2 x64 Linux


View Complete Details

Rfid Cards

  • Min. Order (MOQ) 500 Piece(s)
  • Frequency 13.56Mhz or 125khz
  • Cards mIfare, RFID , proxy card
  • Memory 1KB, 4KB contactless card, 32 Contact card
  • Size 85.5*54*0.8mm
We are offering a rfid smart card is any pocket-sized card with embedded integrated circuits that can process and store data and communicate with a terminal via radio waves. There are two broad categories of contactless smart cards. Memory cards contain non-volatile memory storage components and perhaps some specific security logic. Contactless smart cards do not contain and ordinary read-only rfid but they do contain a re-writable smart card microchip that can be transcribed via radio waves.

Additional Information:

Payment Terms : T/T

Packaging Details : 100pcs/box

Delivery Time : 15 days

View Complete Details

Fingerprint Reader

The U.are.U 4500 Reader is a USB fingerprint reader featuring an elegant, sleek design with a soft, cool blue glow and, of course, the unsurpassed performance DigitalPersona is known for. Made for powerusers and shared environments, the 4500 is the natural choice for those who want and need the very best.

View Complete Details

Gps Tracking Sytem

  • Min. Order (MOQ) 5 Piece(s)
  • Brand Name Radical
We are offering Gps Tracking Sytem. A reliable gps/gprs vehicle mounted device fitted on each vehicle to transmit the real time vehicle location & speed.

secured online access to web based application to track vehicle
multiple login
vehicle grouping
vehicle tracking on mobile phone.
alerts via sms/email/phone
to managers
to drivers ( optional)
view real time location of any vehicle
auto refresh

view real time location of all vehicles
auto refresh

view travel history on google maps.
virtual fence setup.

real time notifications
not responding
over speed
route deviation
entry/exit of a location

Additional Information:

Packaging Details : Standard box

Delivery Time : 7 days

View Complete Details

Access Control System

  • Operating Temperature 0C - 45C
  • Users 2, 200 Fingerprints
  • Transaction Storage 50, 000 Logs
  • Communications RS232 , RS485 , TCP/IP
  • Identification time <= 2 sec
  • FAR <=0.0001%
  • FRR <=1%
  • Wiegand Signal Output
  • Access Control Interface 3rd party electric lock
  • Algorithm 9.0 Version
  • Operating Humidity 20% - 80%
  • Sensor 500 DPI Optical Sensor
  • Power Supply 12V DC
  • Display B&W LCD Screen
  • Dimension(WxHxD) 90 x 190 x 39.5 mm

Face Recognition System

  • Image sensor special Stereo Dual Sensor
  • Display 3 inch Touch Screen
  • Face Capacity 200 (1:N),
  • ID Card Capacity 10, 000
  • Logs Capacity 100, 000
  • Algorithm Version Face 7.0
  • Communication TCP/IP, USB Host
  • Power supply 12v/1.5A
  • Verification Speed <1S
  • Operating temperature 0c ,
  • Operating humidity 20% - 80%
  • Dimensions 104.70(L)*160.00(H) *36.00(D) mm

Hotel Locks

  • Material Zinc Alloy
  • Dimension(LxWxH) 146.5 X 70.0 X 260 mm
  • Lead Indicator Green & Red , Beeper : Yes
  • Mortise U.S. Mortise with 5 latches
  • Encoder Mifare
  • Operating System Windwos Xp/Vista/Win 7
  • Type Of Card 13.56 MHz Mifare
  • Temperature 0C - 45C
  • Operating Humidity 20%-80%
  • Low battery warning voltage 4 x1.5 V AA Battery
  • Power input 4 x 1.5V AA Battery
  • Backup Unlock Mechanism Mechanical key

Fingerprint Integreted Printer

  • Register Capacity 3000
  • Record Capacity 100000
  • Sensor 500 DPI Optical Sensor
  • Identification speed 1.5sec
  • Communications TCP/IP & USB
  • Card Reader Inbuilt Proximity Card reader , Thermal printer Inbuilt
  • Software T&A Software with Visitor Management eTimeTrackLite with MS Access free for 500 users
  • Also available MS-SQL and Oracle version

Fingerprint Time Attendance System


  • 32 Bit high speed embedded processor

  • 1500FP Templates & 50000 Transaction

  • 500 DPI Optical Sensor

  • Identification Speed:
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Rahul Baitule (Radical Global)
  • 18, SBI Colony, Gorley Layout, Gopal Nagar, Nr Mate Square, Nagpur - 440022., Maharashtra - 440014, India
  • Share us via
Pocket Mate Reader Standalone Contactless Reader Manufacturer from Nagpur, Maharashtra
Post Buy Requirement
RG
Nagpur, Maharashtra, India
Add Review

Other Products / Services

Pocket Mate Reader


Overview


Portable and lightweight, the ACR38U PocketMate II Smart Card Reader is a USB-sized device that transforms into a smart card reader for full-sized contact smart cards with just a single swivel motion.


With its MicroUSB OTG interface, it supports most smartphones and tablets, and can be easily integrated with any mobile device running on the Android platform versions 3.1 and above. Additionally, it may be used with Windows, Linux, or Mac operating systems, because of its PC/SC and CCID compliance.


It can run applications that use full-sized contact smart cards and meets security requirements in various fields, including m-Commerce.


ACR38U PocketMate II supports ISO 7816 Classes A, B, and C smart cards (5V, 3V, and 1.8V), microprocessor cards with the T=0, T=1 protocol, and common memory cards. It has a smart card read/write speed of up to 344 Kbps.


This small device proves to be a powerful smart card reader, as it houses the ACR38 core, which has been proven to support highly demanding smart card applications. Built with a modern and functional design, the ACR38U PocketMate II is a smart card reader that is particularly recommended for frequent travelers who need to complete transactions securely on the road.




Feature



  • Supports ISO 7816 Class A, B and C (5 V, 3 V, 1.8 V) cards

  • Supports microprocessor cards with T=0 or T=1 protocol

  • Supports memory cards:

    • Cards following the I2C bus protocol (free memory cards), including:

      • Atmel: AT24C01 / 02 / 04 / 08 / 16 / 32 / 64 / 128 / 256 / 512 / 1024

      • SGS-Thomson: ST14C02C, ST14C04C

      • Gemplus: GFM1K, GFM2K, GFM4K, GFM8K



    • Cards with intelligent 256 bytes EEPROM and write protect function, including: SLE4432, SLE4442, SLE5532, SLE5542

    • Cards with intelligent 1K bytes EEPROM and write-protect function, including: SLE4418, SLE4428, SLE5518, SLE5528

    • Cards with 104 type of EEPROM non-reloadable token counter cards, including: SLE4406, SLE4436, SLE5536, SLE6636

    • Cards with secure memory IC with password and authentication, including: AT88SC153, AT88SC1608

    • Cards with Intelligent 416-Bit EEPROM with internal PIN check, including: SLE4404

    • Cards with Security Logic with Application Zone, including: AT88SC101, AT88SC102, AT88SC1003



  • Supports PPS (Protocol and Parameters Selection)

  • Features Short Circuit Protection

  • Application Programming Interface:

    • Supports PC/SC

    • Supports CT-API (through wrapper on top of PC/SC)







Application



  • Mobile Banking & Payment

  • e-Healthcare

  • e-Purse & Loyalty




Tech-Specs









































Dimensions 58.0 mm (L) x 20.0 mm (W) x 13.7 mm (H)
Interface MicroUSB (OTG) Full Speed
Supply Voltage Regulated 5V DC
Supply Current Max. 50mA
Operating Temperature 0-50C
CLK Frequency 4 MHz
Smart Card Interface Support ISO 7816 Class A, B and C ( 5 V, 3 V, 1.8 V )
Compliance / Certifications

  • EN60950/IEC 60950, ISO 7816, FIPS 201, TAA, CE, FCC, VCCI, PC/SC, CCID, EMV 2000 Level 1, RoHS, USB Full Speed

  • Microsoft WHQL: 2000, XP, Vista, 7, 8, Server 2003, Server 2008, Server 2008 R2, Server 2012


Operating System Support

  • Win98, Win ME, Win NT 4.0, Win 2000, Win 2003, Win 2003 R2, Win XP, Win Vista, Win 2008, Win 7, Win 8

  • Win 2003 x64, Win 2003 R2 x64, Win XP x64, Win Vista x64, Win 2008 x64, Win 2008 R2 x64, Win 7 x64, Win 8 x 64, Win 2012 x64

  • Mac

  • Linux

  • Android 3.1 and above





View Complete Details

Standalone Contactless Reader

As contactless smart card technology becomes widely accepted in the market, integration of different components in a single device offers security and convenience sought after in many applications.


The ACR1283L is a cost-effective and powerful contactless smart card reader designed to operate in standalone mode to cater to a wide range of contactless card applications. It comes with four built-in SAM slots, making it suitable for applications that have multiple card issues or different security requirements. ACR1283L enriches user interaction with its two-line graphic LCD, four LEDs, buzzer to clearly display application and card operation status, and a twelve-key capacitive touch keypad for user input. In addition to its standalone operation, The ACR1283L also supports PC-linked operation for typical contactless PC/SC host applications.


With its high speed 32-bit MCU and strong antenna performance, ACR1283L is ready for highly secure and highly demanding applications where speed and security are essential, such as payment and government applications. An all-in-one, cost-effective and powerful terminal designed to provide greater flexibility and convenience, ACR1283L is the smart choice for your smart card applications!




Feature

  • ARM 32-bit CortexTM-M3 Processor

  • Dual Operation Modes:

    • PC-linked

    • Standalone



  • PC-linked Operation:

    • USB 2.0 Full Speed Interface

    • CCID Compliance

    • Supports PC/SC

    • Supports CT-API (through wrapper on top of PC/SC)



  • Standalone Operation:

    • Support for third-party application programming

    • Over 400 KB memory space for third-party application

    • Over 500 KB memory space for data storage

    • Supported development platforn:

      • IAR Embedded Workbench, Version 5.50 or above

      • CoIDE(GCC), Version 1.3.0 or above





  • Smart Card Reader:

    • Read/Write speed of up to 848 kbps

    • Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type)

    • Support for ISO 14443 Part 4 Type A and B and Mifare series

    • Built-in anti-collision feature (only one tag is accessed at any time)

    • Four ISO 7816 compliant SAM slots



  • Built-in Peripherals:

    • Two-line graphic LCD

    • Four user-controllable LEDs

    • User-controllable buzzer

    • Twelve-key capacitive touch keypad



  • Real-time clock (RTC) with independent back up battery

  • In-device AES (128 and 256), DES and 3DES encryption

  • USB Firmware Upgradability





Application



  • e-Government

  • Banking & Payment

  • Access Control

  • Network Security

  • e-Purse & Loyalty

  • Transportation



Tech-Specs





















































Dimensions Main Body: 133.4 mm (L) x 88.4 mm (W) x 20.9 mm (H)
With Stand: 158.0 mm (L) x 95.00 mm (W) x 95.0 mm (H)
Weight Main Body: 185 g
With Stand: 420 g
Processor ARM 32-bit CortexTM-M3 Processor
Interface USB Full Speed
Operating Distance Up to 50 mm (depends on the tag type)
Supply Voltage Regulated 5V DC
Supply Current 500 mA (max.)
Operating Temperature 0-50C
Operating Frequency 13.56 MHz
Smart Card Interface Support

  • ISO 14443 Type A & B

  • Mifare


Compliance / Certifications

  • ISO 14443, CE, FCC, PC/SC, CCID, RoHS, USB Full Speed

  • Microsoft WHQL 2000, XP, Vista, 7


Operating System Support

  • Win 2000, Win XP, Win Vista, Win 7, Win Server 2003, Win Server 2008

  • Win XP x64, Win Vista x64, Win 7 x64, Win Server 2003 x64, Win Server 2008 x64, Win Server 2008 R2 x64

  • Linux

  • Mac

  • AndroidTM 3.1 and above





View Complete Details

Nfc Reader

The ACR122S NFC Contactless Smart Card Reader is the serial interface reader in the ACR122 family developed based on the 13.56 MHz Contactless (RFID) Technology and compliant with the ISO/IEC 18092 Standard for Near Field Communication (NFC). It supports Mifare, ISO 14443 Type A and B, and all four types of NFC tags.


ACR122S is a plug and play device which does not require any driver installation. It comes with a built-in ISO 7816 SAM slot for enhanced security, plus a buzzer and two LEDs for rich user interaction. The reader can also read and write faster and more efficiently by making use of up to 424 Kbps for tag access. The proximity operating distance of ACR122S is up to 5 cm, depending on the type of tag in use.


ACR122S is also available in module form for easy integration into bigger machines, like POS terminals, physical access devices and vending machines. Typical applications of the ACR122S reader include e-payment, e-ticketing for events and mass transit, toll road fare collection and network authentication.




Feature



  • Serial RS-232 Interface: Baud Rate = 115200 bps, 8-N-1

  • USB interface for power supply

  • CCID-like fram format (Binary format)

  • Smart Card Reader:

    • Read/Write speed of up to 424 kbps

    • Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type)

    • Support for ISO 14443 Part 4 Type A and B cards, Mifare, FeliCa, and all four types of NFC (ISO/IEC 18092 tags)

    • Built-in anti-collision feature (only one tag is accessed at any time)

    • ISO 7816-compliant SAM slot



  • Built-in Peripherals:

    • Two user-controllable LEDs

    • User-controllable buzzer







Application



  • e-Government

  • Banking & Payment

  • Access Control

  • Network Security

  • e-Purse & Loyalty

  • Transportation



Tech-Specs

















































Dimensions 120.5 mm (L) x 72 mm (W) x 20.4 mm (H)
Weight 148 g
Interface RS232 for data communication, USB for power transmission
Operating Distance Up to 50 mm (depends on the tag type)
Supply Voltage Regulated 5V DC
Supply Current 200 mA (operating); 50 mA (standby); 100 mA (normal)
Operating Temperature 0 50 C
Operating Frequency 13.56 MHz
Smart Card Interface Support ISO14443 Type A & B
Mifare
FeliCa
4 types of NFC (ISO/IEC18092) tags
Compliance / Certifications ISO 14443, CE, FCC, KC, VCCI, RoHS
Operating System Support Win 98, Win ME, Win 2000, Win XP, Win Vista, Win 7, Win Server 2003, Win Server 2008
Win XP x64, Win Vista x64, Win 7 x64, Win Server 2003 x64, Win Server 2008 x64, Win Server 2008 R2 x64 Linux


View Complete Details

Rfid Cards

  • Min. Order (MOQ) 500 Piece(s)
  • Frequency 13.56Mhz or 125khz
  • Cards mIfare, RFID , proxy card
  • Memory 1KB, 4KB contactless card, 32 Contact card
  • Size 85.5*54*0.8mm
We are offering a rfid smart card is any pocket-sized card with embedded integrated circuits that can process and store data and communicate with a terminal via radio waves. There are two broad categories of contactless smart cards. Memory cards contain non-volatile memory storage components and perhaps some specific security logic. Contactless smart cards do not contain and ordinary read-only rfid but they do contain a re-writable smart card microchip that can be transcribed via radio waves.

Additional Information:

Payment Terms : T/T

Packaging Details : 100pcs/box

Delivery Time : 15 days

View Complete Details

Fingerprint Reader

The U.are.U 4500 Reader is a USB fingerprint reader featuring an elegant, sleek design with a soft, cool blue glow and, of course, the unsurpassed performance DigitalPersona is known for. Made for powerusers and shared environments, the 4500 is the natural choice for those who want and need the very best.

View Complete Details

Gps Tracking Sytem

  • Min. Order (MOQ) 5 Piece(s)
  • Brand Name Radical
We are offering Gps Tracking Sytem. A reliable gps/gprs vehicle mounted device fitted on each vehicle to transmit the real time vehicle location & speed.

secured online access to web based application to track vehicle
multiple login
vehicle grouping
vehicle tracking on mobile phone.
alerts via sms/email/phone
to managers
to drivers ( optional)
view real time location of any vehicle
auto refresh

view real time location of all vehicles
auto refresh

view travel history on google maps.
virtual fence setup.

real time notifications
not responding
over speed
route deviation
entry/exit of a location

Additional Information:

Packaging Details : Standard box

Delivery Time : 7 days

View Complete Details

Access Control System

  • Operating Temperature 0C - 45C
  • Users 2, 200 Fingerprints
  • Transaction Storage 50, 000 Logs
  • Communications RS232 , RS485 , TCP/IP
  • Identification time <= 2 sec
  • FAR <=0.0001%
  • FRR <=1%
  • Wiegand Signal Output
  • Access Control Interface 3rd party electric lock
  • Algorithm 9.0 Version
  • Operating Humidity 20% - 80%
  • Sensor 500 DPI Optical Sensor
  • Power Supply 12V DC
  • Display B&W LCD Screen
  • Dimension(WxHxD) 90 x 190 x 39.5 mm
View Complete Details

Face Recognition System

  • Image sensor special Stereo Dual Sensor
  • Display 3 inch Touch Screen
  • Face Capacity 200 (1:N),
  • ID Card Capacity 10, 000
  • Logs Capacity 100, 000
  • Algorithm Version Face 7.0
  • Communication TCP/IP, USB Host
  • Power supply 12v/1.5A
  • Verification Speed <1S
  • Operating temperature 0c ,
  • Operating humidity 20% - 80%
  • Dimensions 104.70(L)*160.00(H) *36.00(D) mm
View Complete Details

Hotel Locks

  • Material Zinc Alloy
  • Dimension(LxWxH) 146.5 X 70.0 X 260 mm
  • Lead Indicator Green & Red , Beeper : Yes
  • Mortise U.S. Mortise with 5 latches
  • Encoder Mifare
  • Operating System Windwos Xp/Vista/Win 7
  • Type Of Card 13.56 MHz Mifare
  • Temperature 0C - 45C
  • Operating Humidity 20%-80%
  • Low battery warning voltage 4 x1.5 V AA Battery
  • Power input 4 x 1.5V AA Battery
  • Backup Unlock Mechanism Mechanical key
View Complete Details

Fingerprint Integreted Printer

  • Register Capacity 3000
  • Record Capacity 100000
  • Sensor 500 DPI Optical Sensor
  • Identification speed 1.5sec
  • Communications TCP/IP & USB
  • Card Reader Inbuilt Proximity Card reader , Thermal printer Inbuilt
  • Software T&A Software with Visitor Management eTimeTrackLite with MS Access free for 500 users
  • Also available MS-SQL and Oracle version
View Complete Details

Fingerprint Time Attendance System


  • 32 Bit high speed embedded processor

  • 1500FP Templates & 50000 Transaction

  • 500 DPI Optical Sensor

  • Identification Speed:
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Rahul Baitule (Radical Global)
  • 18, SBI Colony, Gorley Layout, Gopal Nagar, Nr Mate Square, Nagpur - 440022., Maharashtra - 440014, India
  • Share us via