Mumbai, Maharashtra, India
Our Products
Biogas, originating from bio-mass is gaining increasing worldwide importance as a recognised renewable energy source. Biogas production can and will contribute in a significant way to future energy supplies, replacing more and more existing fossil-fuel sources such as coal, oil and natural gas. Extensive promotion schemes throughout many countries in Europe, spearheaded by Germany, will lead to the production of biogas being perfected.
Building on over 30 years of experience in the field of compressed air and gas treatment, Parker Hiross Zander exhibit extensive know- how when it comes to filtration, moisture removal, cooling and the drying of bio-, sewage- and landfill gases.
Finites FFC-110 is often used onboard CNG (compressed natural gas) powered vehicles to prevent contaminants in the fuel tank from getting into the engine, protecting critical engine components, like fuel injectors. Its small size allows for versatile installation and easy servicing. Each housing is powder painted for long-term corrosion protection. These coalescers are ideal for operating environments up to 500 PSIG. Coalescing efficiencies of 95% (grade 10) or 99.97% (grade 6) can be chosen to match the filter to the application. Both the FFC-110 and FFC-110L have an 1/8" NPT drain port with a brass petcock manual drain.
The Balston GS Series Membrane Filter Cartridges combine absolute membrane filtration down to 0.01 m, with an integral pre-filter to protect the membrane. Ideally suited for high purity compressed air and gas requirements, these membrane cartridges are available in several housing configurations shown above.
Use as a Final Filter for:
Ultra-high purity gases
Corrosive or toxic gases
Cylinder gases
Doping gases
Balston Steam Filters
Balston Series SR Filters are in full compliance with the requirements of the US Food, Drug and Cosmetic Act. They also meet the regulations for Indirect Food additives used as Basic Components for Repeated Use Food Contact Surfaces as specified in 21 CFR Part 177, and Current Good Manufacturing Practices, 21 CFR Part 110. These filters have been accepted by the USDA for use in federally inspected meat and poultry plants. Balston Steam Filters are in full compliance with the 3A Accepted Practices (Number 609-04) for producing steam of culinary quality. They are also in full compliance with the requirements of the Health Protection Branch of Health and Welfare Canada.
Sterile Air Filters
Balston grade SA filter cartridges, rated at 99.9999+% efficiency for 0.01 micron particles are used in the food and
firmentation industry and are FDA approved. These are Steam Sterilizable.
Balston Compressed Gas Filters
Balston high flow rate compressed gas filters offer exceptionally high efficiency coalescing filtration of compressed gas at high flow rates. Specifically designed to remove suspended liquids and dirt from pipeline natural gas, the housings are ASME Code Stamped up to 1440 psig. Equipped with Balston Microfibre Grade DXE Disposable Filter Cartridges, the filters are rated at 93% retention of 0.01 micron and essentially 100% retention of 1 micron liquid droplets and particles.
The origins of modern compressed air filtration can be traced back to domnick hunter in 1963, it was the first company to use Microfiber filter media for purification applications, changing the compressed air industry forever.
The OIL-X filter range was the first filter range to fully utilise this groundbreaking technology and has always been synonymous with high quality compressed air. Now in the 21st century, the OIL-X name remains, but the technology has evolved beyond recognition.
Parker domnick hunter OIL-X EVOLUTION
Since the introduction of the first OIL-X range, Parker domnick hunter has continued to develop both the compressed air filter and the standards governing compressed air quality. Constantly innovated, OIL-X EVOLUTION has become the leading technology for compressed air filtration, providing the exact balance between air quality, energy efficiency and low lifetime costs.
The Parker domnick hunter Air Treatment Units (ATU) are compressed air railway dryers fitted with associated filtration. Designed to remove bulk oil, oil aerosols, bulk water, dirt particles and water vapour from railway industry compressed air systems, providing the highest quality compressed air to applications which depend upon clean dry air for their reliable operation. As the patented design is modular in construction, the ATU can be designed to meet the specific dewpoint requirements for the application at the specified worst case operating parameters.
This filter type utilises a very high efficiency coalescing element comprising of several layers of very fine borosilicate glass micro-fibre which captures dirt particles down to 0.01 micron in size and removes oil aerosols down to 0.01 mg/m3 @ 20C (68F). Coalesced liquid condensate collects in the base of the filter housing where it is automatically removed from the system by a solenoid operated / timed drain valve
This partial list of applications for Parker CN series filters has a common factor, the need for an economical, medium pressure range filter with excellent fatigue pressure ratings. Prior to the availability of the CN filter, applications were restricted by limitations of a spin-on can, or forced into the higher cost range of high pressure filters.
The CN series fills this gap, and now with the newly increased fatigue rating from 550 to 800 psi, the applications are expanded
Ecoglass III Replacement Elements
Ecoglass III represents the merging of high performance filtration technology with environmentally conscious engineering. The Ecoglass III line of replacement elements feature 100% non-metallic construction. The design reduces solid waste and minimizes disposal costs for industry. The non-metallic construction means lightweight elements (60% less weight) for easier servicing.
The Ecoglass III elements utilize the same proprietary media design as our Micro glass III line of replacement elements. With Ecoglass III, a reusable core is installed into the filter housing and remains in service throughout the life of the assembly.
High pressure compressors are used in a variety of applications. Many owners, operators and designers of high pressure compressed air or gas systems rely on Parkers Finite Filter Operation for high efficiency filters. End users of high pressure compressed air, such as scuba divers and fire rescue workers, depend on high quality breathable air.
Throughout the stages of compression many contaminants can enter into the system. Excessive amounts of liquid aerosols, primarily lube oil carryover and solid particulate contamination are common in high pressure systems. In addition, higher temperature levels are possible and may cause liquid oils to varnish. This contamination can lead to poor component performance and wear that may lead to unscheduled maintenance. Even submicronic contaminants in compressed air or gas systems can foul multistage compressors, increasing maintenance costs and impacting product quality.
Balston Vacuum Pump Exhaust Filters remove 99.9% of 0.1 micron oil mist and smoke particles. Balston Grade 30 vacuum Pump inlet Filters remove 90% of all 0.1 micron particles and droplets. Balston Grade 102 Vacuum Pump Inlet Filters prevent oil back streaming from the pump to the evacuated chamber, and protect the pump from damage by submicron particles (at relatively low concentrations).
All Balston filters are available for hazardous and non-hazardous applicatioon, and offer superior chemical and solvent resistance. Balston Vacuum Pump Filters increase productivity by eliminating costly shutdown time and maintenance.
