Write a Review
Our Products
Our product range contains a wide range of Zero Hold Up Filter Press and Sparkler Filter Press
The Cartridge assembly consists of plates, perforated screens, spacers and fitter media. Interlocking spacers internally form single pipeline. The unfiltered liquid is centrally fed under pressure from bottom inlet. The liquids spreads out equally on each plate fitted with filter media. Solids remain on filter media and clear. filtrate flows through precisely made holes on sides of plates and collects in the shell, which then comes out through the outlet. In this process, solids are evenly distributed on each plate. The cake is then cleaned from the filter material and used again for filtration process.
Single pass filtration with no solid bypassFull batch recovery, no separate scavenging system needed.Proper sealing which allows the filtration of volatile, toxic and inflammable products.
Plate pack arrangement ensures :-
Any type of filtering media singularly or in combination, can be used to achieve required micron efficiency.Easy removal and cleaning of the Cartridge Assembly.
Closed System ensures :-
Filtration of toxic, hazardous, explosive materials.Efficiently cleaned and sterilized.
Central feeding ensures :-
No solid inside the vessel, complete recovery of liquids.Cake solids can be maximum dried with N2Complete cake retains over the plate.Uniform filter-aid bed can be formed.Reduces the cost of expensive solvents.
SALIENT FEATURES :
Complete filtration of the batch without any hold up due to reverse flow of liquid hence large saving in time & cost.
Back wash facility can be provided for continuous operations.
No scavenger arrangement required.
The cake, filteraid & solids remain totally enclosed allowing filtration of toxic, hazardous & explosive liquids.
No contamination of internal surface of shell.
The top dome structure ensures fast & easy removal of cartridge assembly & cleaning of cake.
Other features same as standard flow type
| It consists of a strong S.S.tank with a S.S. top cover and tightening bolt , the filtering unit shall be fitted in the center of the tank and consist of S.S.plate with perforated screens and interlocking cups the S.S.top cover shall fit on the gasket and the tightening wing wing nuts shall provide leak proof seal . a pressure gauge and air vent shall be provide on the top Salient Features :- 1) Manufactured from S.S.304/316/316 L quality argon arc welded and mirror polished |
|
Size |
Pump |
Motor H.P. |
Seal Type |
Out put |
|
8" x 6 |
½“ Gear Pump |
1 H.P. |
Oil Seal |
600 ltr/hr |
|
8" x 8 |
½“ Gear Pump |
1 H.P. |
Oil Seal |
750 ltr/hr |
|
14" x 8 |
1" Centrifugal |
2 H.P. |
TC V/S TC Seal |
3500 ltr/hr |
|
14" x 10 |
1" Centrifugal |
2 H.P. |
TC V/S TC Seal |
4000 ltr/hr |
|
18" x 8 |
1 ½ " Centrifugal |
3 H.P. |
TC V/S TC Seal |
6500 ltr/hr |
|
18" x 12 |
1 ½ " Centrifugal |
3 H.P. |
TC V/S TC Seal |
8000 ltr/hr |
|
18" x 23 |
1 ½ " Centrifugal |
3 H.P. |
TC V/S TC Seal |
14,000 ltr/hr |
|
24" x 16 |
2" Centrifugal |
5 H.P. |
TC V/S TC Seal |
15,000 ltr/hr |
|
24" x 24 |
2.½ " Centrifugal |
5 H.P. |
TC V/S TC Seal |
25,000 ltr/hr |
|
33" x 10 |
2" Centrifugal |
5 H.P. |
TC V/S TC Seal |
22,000 ltr/hr |
|
33" x 14 |
2.½" Centrifugal |
5 H.P. |
TC V/S TC Seal |
30,000 ltr/hr |
Mr. Ramadhar Singh (Veena Pharma Machinery)
Gala No. B-16, Road No.34, Mandal Compound, Near J.b. Sawant Bus Stop, Wagle Industrial Estate, Wagle Estate, Thane, Maharashtra - 400604
Share us via
