Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

VI

Veksler Instruments
location Makarpura, Vadodara, Gujarat

Write a Review
Call Now Call Now

Our Products

  1. Rotameters 6 Products available
  2. Level Switches 5 Products available
  3. Measurement Gauges & Fittings 4 Products available
  4. Calibrators And Monitoring Systems 3 Products available
  5. Medical Accessories 2 Products available
  6. Manometers 2 Products available
  7. Temperature Controller 1 Products available
  8. Thermocouple 1 Products available
  9. Pipeline Accessories 1 Products available
  10. Sensors 1 Products available
  11. Electric Fittings And Components 1 Products available
  12. Flanges 1 Products available
  13. Level Transmitters 1 Products available
  14. Pressure Switches 1 Products available
  15. Process Control Systems & Equipment 1 Products available
  16. Others Products 8 Products available

Temperature Controller

Leading Manufacturer, Supplier & Retailer of Pneumatic Temperature Controllers.

Pneumatic Temperature Controllers

Pneumatic Temperature Controllers
  • Temperature Range -50 to 750 Deg F
  • onnection ¾" NPT (M)
  • Thermowell MOC SS 316
  • Length 300 mm
  • Service Oil / Water
  • Operating Pressure 20 Bar or Kg / cm2
  • Supply Pressure 1.4 Kg / cm2
  • Output 0.2 to 1 Kg / cm2
  • Pneumatic Connection ¼" NPT
  • Action Reverse (Increase in temperature will decrease output)
The sensor element consists of a Bimetal combination having different thermal expansion coefficient. This difference in their thermal expansion coefficient produces a mechanical motion. The sensing element of the Controller is installed directly in the process vessel. The temperature changes inside the process will result in the following
  • Incase of a rise in temperature, the inner metal rod will expand and will contract incase of a decrease in temperature. The change in length is proportional to the change in temperature.
  • The outer metal tube has a low expansion coefficient and thus change in length is negligible. But since one end is attached to the inner metal tube, the inner rod moves as the outer tube changes length.
  • The opposite end of inner rod pushes against a floating link. It is held concentric with a spring loaded inner valve. When the temperature decreases, the inner rod applies pressure on the floating link, it causes pivot to move around the adjustment fulcrum point which tilts the inner valve plug thus the output signal increases. The temperature can be adjusted by moving the knob on the fulcrum.
PNEUMATIC TEMPERATURE CONTROLLERS Introduction
The instrument is provided with two adjustments (a) temperature set Point control and (b) Proportionality control. The temperature can be adjusted and where between - 50 F to + 750 F. The proportionality control is given to set the desirable temperature span. The proportionality control, calibrated from 5 to 60 F corresponds to produce 0.2 - 1 Kg / cm2output.
The orifice in the seat is eccentrically drilled so that while rotating the seat it moves the rifice with respect to the adjusting serew. This regulates the orifice opening with respect to temperature changes.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.