Adhesives #1051701

We are offering corrugated gum.Cgp is white glue and is available in various ratios as per the customer requirements. Our cgp works on the concept of stain-hall process system.Stain-hall corrugating adhesive is a thermosetting adhesive. This adhesive usually have some quantity of free starch and un-gelatinized starch, the free starch gets gelatinized by the heat of corrugating medium and gives a stronger bonding.Uses: it is used in corrugation flute making machine and on 3ply and 5 ply semi-automatic machines. Advantages:easy to mixpolymers within starch upon gelatinization absorb water and during cooling gets entangled with paper fibres and thereby bridges the two sheets of paper.Lower consumption of gluemaintains viscosity and solid contentgood bonding due to low gelatinization corrugation gum preparation method (200 kg) 1:6. take (approx 80 litres) of water in a stirring vessel.open a gum powder bag and you find a packet of gum compound (chemical) inside the bag, remove the chemical packet and mix in 3 to 4 litres of water in a separate bucket and keep aside. now put the gum powder in the vessel and stir for approx. 5minute. now slowly add the gum compound (chemical) solution in the vessel and stir for another 20 minutes as the mass becomes thick start adding remaining part (approx. 90ltr) of water slowly. check and set the viscosity between 18 to 24sec in ford b4 cup.(note: to set the viscosity between 18 to 24sec you may need approx10ltrs of water) (note: 1. It is must to have a high speed mechanical stirrer with minimum 3hp motor and 1440rpm for preparation of gum)