Computer Monitor #4660775

Aqua Foam Nozzle which can form the discharging part of monitors are considered to be a technological marvel in fire fighting because of the highest discharging ability and the maximum hydraulic efficiency with respect to the conversion to the available pressure energy to maximum throw after the induction of foam concentrate in to the water stream. In large tank fires, process fire, blowout fire, scenarios, high volume long-range nozzles only could provide the means of controlling or extinguishing. These nozzles enable you to apply maximum amount of foam solution expanded to about 1:4 on to the burning fuel surface from very far distance. These high discharges enable you to utilize mass stream approach for High Local Application densities and which in turn lead to Quick Beach Head Information. The nozzle which could be supplied with stand post monitors and trailer mounted units will have aqua jet controller pump as a sub-accessory. This pump helps you to transfer foam concentrate from as far as 70 meters, to nozzle inlet, using water from single hydrant.For any particular size of hydrocarbon risk, you can now have the most efficient nozzle in the world to attack and not just resist.

The Electrically Operated Remote Control non-aspirating Foam Monitor made of Stainless Steel, capable to discharging 1000 US GPM (3785 LPM) at 100 psi (7 bar) inlet pressure over a range of 60 meters in horizontal direction and 25 meters in vertical direction. Water operated Jet Ratio Controller Pump (JRCP) is provided, suitable for feeding foam concentrate solution to the monitor nozzle from distance of 50 meters. The Foam Monitor has facility for converting WaterFoam jet to fog and vice-versa very quickly and easily by remotely. Foam Monitor is provided with self-locking swivel gear bearing for rotation in horizontal and vertical direction remotely.

The 3D Hazchem Multipurpose 3 in 1 Monitor is specially designed to throw Water, Foam, Dry Chemical Powder and spray, Jet & Fog through single nozzle to fight against hydrocarbon polar solvent fire by a single fire fighter. The Multipurpose 3 in 1 Monitor is provided with non-aspirating type nozzle capable to discharging 1000 US GPM (3785 LPM) at 100 psi (7 bar) inlet pressure over a range of 60 meters in horizontal direction and 15 meters in vertical direction. Water operated Jet Ratio Controller Pump (JRCP) is provided suitable for feeding foam concentrates solution to the monitor nozzle from distance of 50 meters & above. The Monitor has facility for converting Water Foam Jet to fog and vice-versa and also Dry Powder can be jetted from the centre of nozzle very quickly and easily, even during continuous operation. Monitor is provided with self-locking swivel gear bearing for rotation in horizontal and vertical direction through hand wheel operation even under high operating pressures. The monitor assembly is designed to withstand the nozzle reaction force experienced during the operation of jet fog.

The manually operated Self-inducting non-aspirating Foam Monitor made of Stainless Steel, capable to discharging 1000 US GPM (3785 LPM) at 100 psi (7 bar) inlet pressure over a range of 65 to 70 meters in horizontal direction. Foam monitors are very compact in construction and gives good flexibility of the operation while fighting with fire. Foam proportioning 3 % is done with help of Foam Inductor placed within the Nozzle. The Foam Monitor also have facility for on verting WaterFoam jet to fog and vice-versa very quickly and easily, even during continuous operation. Foam Monitor is provided with self-locking swivel gear bearing for rotation in horizontal and vertical direction through hand wheel operation even under high operating pressures. A single fire fighter can manually operate the Foam Monitor with large flow capacity, long-range capability. The monitor assembly is designed to withstand the nozzle reaction force experienced during the operation of jet fog.