Vin Industries Pvt. Ltd.

Naraina, Delhi

backed by 15 years of experience, we offer superior quality dessichem in a wide stock. The additive is highly effective in processing recycled plastics and in eliminating moisture.

we have been highly acknowledged by over 1, 000 customers who rely on our additive because of the usps mentioned below:benefits ofdessichem

• safe for operators and machinery
• excellent quality
• easy availability, even for large quantities

to know more aboutdessichem, please call our customer service hot line at 0 98 99 77 88 88 or fill the form on right side.

dessichem is sold only in india and nepal. For requirements from other countries, please fill the contact us form.

RecycloAidis helping recyclers homogenize various polymer streams, eliminate moisture, improve gloss and increase their productivity.There are two major applications of RecycloAid:

Blown Film Recycling:

RecycloAid benefits in Blown Film Recycling:

• No die build-up
• Enhanced gloss and surface finish
• Improved strength
• No moisture problems like: fish eyes, porosity, lacing in films etc

Plastic Recycling:

RecycloAid benefits in plastic recycling :

• Round and solid pellets
• Removal of porosity
• Increase rate of production
• No die build up

Increased cost pressures & competition have forced processor to increase filler loading (i.e. increase the amount of fillers like Calcium Carbonate) in PVC pipes, profile etc.Often increased filler loading is associated with deterioration of the physical property of the products, most notably the impact properties of the finished products.With the addition of ProAid+, the original physical / mechanical properties of the polymer are maintained even at higher filler loading .

How ProAid + Works

ProAid + lowers the viscosity of the PVC Resin which increase fusion among different constituents in vinyl formulation and also disperses mineral filler better bond with the polymer, so it is possible to add more filler.

Application of ProAid +

PVC pipes and profiles

ProAid + Advantages

• Improved impact properties or increased filler loading
• Improved mechanical & physical properties
• It increase melt flow rate hence, it reduces machine load

Packaging:

ProAid + is available in 25kg bags.

Rotational Molders often face problems of reduced shine and surface finish.

Solution:

Rotex Foffers enhanced flow, shine and improvement is surface finish. Pinholes disappear. There is a smoothness and gloss to the surface

CureWel is an effective additive, designed for uniform vulcanization with good scorch safety. It helps in reducing scrap and increases overall productivity.

CureWel a powder Sulphur, gives:

• Better Scorch Safety
• Improved tensile strength
• Improved compression Set
• Improved tear resistance
• Equivalent hardness
• Better heat aging properties

Available in 25kg bags.

We are engaged in manufacturingAquaNil, which is processed with a blend of a number of metal oxides. A surface modified powder, and it is delivered to our clients after appropriate testing. The powder ensures minimal dusting.

The additive can excellently clean defects such as pinholes, silver streaks, blisters and is effective in elevating the physical properties of the products. Available in 25 kg bags.

Backed by a diligent team of professionals, we have been able to bring an outstanding range ofImpact+modifiers.

These can powerfully improve the overalltoughness of polymers. Under optimal dispersion, these even enhance the strength, mechanical properties and elongation of polymers.

Available in25kg bags, our clients are welcomed to purchase the additives at market leading rates.

In production units where many polymers are used, generally the scrap generated is not kept separately for each polymer. The realization of such scrap is low, as the different materials are not compatible with each other.

It is also difficult to identify different materials in scrap form. ScrapAlloy combines streams of mixed polymers such as HDPE / PP, PET / PE, Nylon / PE (laminate film scrap) etc. and converts such stream of mixed scrap into a useful product.The general principle of Polymer Alloying is to reduce interfacial energy between two polymers in order to increase adhesion.Generally, adding ScrapAlloy also results in finer dispersion, as well as more regular and stable morphologies. Adding Scrap Alloy generally increases mechanical performance and surface properties. Scrap Alloy acts as a solid surfactant to increase interphase adhesion and create alloys of commonly used polar polymers and polyolefins.

A dosage of 2% to 4% of ScrapAlloy is recommended. Scrap Alloy is available in 25 kg bags.

It is only natural that Cable manufacturers encounter variety of problems in producing a wide variety of cables.Vin Industries offers a range of products to the use of recycled plastic has inevitably increased and achieved a worldwide acceptance. But it often encounters issues like:

Surface Finishing problem

Diminution in tensile, elongation, physical and other mechanical properties

Deterioration of reapplied plastic goods

CableAid PE Works Wonders:

It tremendously enhances the elongation and tensile strengthIt guarantees better output

Eradicates the cracking problems in cables

Effective in strengthening the end product

Saves electric consumption

Areas of usage:

Power Cables

Submersible Wires

FRLS Cables

Processors of plastics products, in particular those who use recycled plastics, face problems like:

• Fish Eyes
• Pinholes
• Silver Streaks
• Poor Strength
• Reduced Surface Finish

Problem:

Simply using standard desiccants does.

Solution:

ChamakShakti, that works great when used.Major benefits of ChamakShakti are mentioned under:

• Acts as a moisture remover (desiccant)
• Removes moisture related problems like pinholes, silver streaks and fish eyes.
• Absolutely pure in quality
• Increases the strength of finished product like garbage bags by increasing the elongation
• Increases production
• Reduces machine load

Stocked at a number of locations across India, ChamakShakti is available 1 kg packaging materials.

VinAid Preacts with H2O molecules when it is in the process of conversion into vapour and gas to form compounds that are stable at high temperatures. This prevents generation of free vapour and gas that would have damaged the product.VinAid P

Advantages:

VinAid Pis priced most economically. It is sold at a price, which is less than the price of most finished products.VinAid Padds its own weight to the product, so there is hardly any cost increase. And it is possible to improve the product quality for free.

Precaution:

VinAid Pis packed in unit pack to ensure that it is opened only at the time of usage and is not exposed to atmospheric moisture. It should not be kept in open during rainy season, during winters and at other times when the humidity is high. If stored properly, VinAid Phas a shelf life of five months but exposure to humidity will shorten this shelf life drastically.

Vinflexreacts with moisture when it is in the process of conversion into vapour and gas. It binds with H2O molecules to form stable compounds.Applications ofVinflex

• Mineral filled PP compounds
• Pressure-less Continuous Curing Systems like micro-wave, LCM, fluid beds or hot air
• PVC plastisols
• Carpet-back layers
• Polysulfide, Nitrile and Silicone compounds
• PU systems, for example in PU flooring

Vinflex AdvantagesUsing it would help with moisture related problem, especially in removing pinholes and streaks/blistering on surface and in reducing porosity.

Packaging

• 1kg. packets
• Convenient to carry
• Customized packing

Manufacturers ofHM-HDPE filmsand sheets would like to use a larger quantity of waste injection molded / blow molded HDPE. This kind of waste is cheaper and available widely.

However, trying to use larger quantities of HM/HDPE film causes film to puncture or there is serious problem in blowing the bubble itself. Furthermore, the film is stiff and rough even when smaller amounts of HDPE are used.

Solution:
Vin Industriesoffers additive calledStrengtheX.

By usingStrengtheX, film processors can add higher amount of recycled injection molded / blow molded HDPE to their Carry Bags / Garbage Bags /Sheets.Advantages of using StrengtheX:

• Increases the gloss of the film / sheet / garbage bag
• The film is softer
• There is increase in the softness and strength of the film
• Higher percentage of recycled injection molded / blow molded HDPE can be used in HM/LD carry bags without compromising on the properties
• Retained strength of carry bags even after mixing 10% extra Blown HDPE

VinTuff additive improves the interface between polar polyester resins and inorganic non polar glass fiber/ filler such as clays. Vin Industries is offering Vin Tuff Addtive for SMC/DMC& hand lay up applications.

Chemical Composition

VinTuff is a low molecular weight co-polymer with high polarity. Polarity is imparted with the acid group monomers.

How VinTuff Functions

When VinTuff is dissolved in monomers like styrene and mixed in unsaturated polyester resin, it imparts polarity to glass fiber and other inorganic fillers resulting in better interface.Glass fiber/clays being heavier in density tend to come to the surface making the moulded surface rough. Addition of VinTuff promotes interfacial adhesion, thus not permitting fillers and fiber to migrate towards surface.

Benefits

• Offers smooth surface and dimension stability.
• Improves mechanical properties.
• Provide high gloss.
• Also acts as a dispersing agent.

Dosage

Approximately 1.5% to 2.5% of total compound weight is recommended.

_{ProcezAid, an additive that works as anrecycling aid.Recycled HDPE Products often have poor shine and surface finish and is also low in strength.ProcezAidenriches with essential chemicals to enhance the entire ofreprocessed HDPE products, so that its marketing becomes easier and it is well appreciated by the customers.}

_{Benefits ofProcezAid:}

• _{Substantial increase in rate of production of pipes}
• _{No need to add moisture powder separately}
• _{Improves the strength & surface finishing}
• _{Also reduce the pinholes}
• _{Give its full weight in final product}
• _{Dosage 1% is sufficient}

MoldWel S to increase stiffness in HDPE molded products.

HDPE crates need to be stiff to prevent buckling when many crates, filled with goods and material are stacked one over another.When crates are stacked one over another, there is a lot of weight on the crates at the bottom. In many cases, the crates can bulge or buckle under the weight.There is a need to make the crates stiffer, i.e., to increase the flexural modulus of HDPE.

There is a similar requirement for increased stiffness in other products as well like HDPE bottle caps, closures etc.

Solution:

MoldWel S resolves this problem. With low dosage levels, MoldWel S increases the flexural modulus of HDPE products.

EliHeatis an additive which is useful in significantly reducing or eliminating preheating of polymers.

Generally polymers likeABS, HIPS, Nylon, filled PPetc. are preheated for 2 to 4 hrs before processing them. This requires expensive hopper driers and electrical energy.

Benifts:

The major benefit ofEliHeatis to increase productivity by

• Reducing preheating time and thus,
• Reducing the total cycle time
• Reducing man power handling cost
• Reducing electricity

Grades:
Separate grades are offered forABS, PP and Nylon

MoldWel R to increase flow and shine in recycled PP / HDPE Products.HDPE crates need to be stiff to prevent buckling when many crates, filled with goods and material are stacked one over another.When crates are stacked one over another, there is a lot of weight on the crates at the bottom. In many cases, the crates can bulge or buckle under the weight.

There is a need to make the crates stiffer, i.e., to increase the flexural modulus of HDPE.There is a similar requirement for increased stiffness in other products as well like HDPE bottle caps, closures etc.

Solution:

MoldWel R resolves this problem. With low dosage levels, MoldWel R increases the flexural modulus of HDPE products.

We are an ISO certified company, counted amongst the trusted manufacturer and distributors of superior quality additives for Rubber and Plastic Industries.Benefits of LamiAid:

• Resins improve the adhesion of lamination with the fabric. This brings down incidents of delamination, leading to lower quality problems.
• Improved productivity

WhileLamiAidA has proven itself in various lamination related applications, in particular in FIBC bags, it has found acceptability amongst number of Indian manufacturers.

Dosage:

The recommended dosage is 1% to 2% of the resin.

• Method of Usage: LamiAidA resins are offered in granular form. This ensures ease of mixing, handling and use.LamiAidA resins are to be dry blended along the lamination resin in the recommended dosage.
• Packaging:25kg bags.

Stretch cling packing is a process in which a pre-extruded tacky film is wrapped around the product such as bundle, roll, pallet load, etc. of any shape and size to impart a firm grip to the packed products.The tacky characteristics of the film helps in self adhesion of the wrap without any external aid.Stretch cling film can be made out of EVA copolymer, PVC, or LLDPE. The film must have an excellent elongation property in machine direction and good tear strength in transverse direction.LLDPE is the prefered polymer for producing stretch cling film. Besides above mentioned characteristics, LLDPE also exhibits excellent draw down characteristics. Cling masterbatch is based on polyisobutene (PIB). This imparts more elasticity to develop a better cling effect.

Solution:

Vin Industries offers VinCling range of PIB masterbatches. Vin Industries is one of the largest suppliers of Cling Film Masterbatch in India. We also export this to a number of countries.

Dosing Level:

A moderate 6 to 8% PIB in the final product would give the desired cling effect. However the exact dosage of PIB masterbatch depends on the type of process and the product specification.For better effects of cling, it is recommended to use octene based LLDPE.It is important to note that the user should wait for 24 hours to get the maximum cling effect since it has a comparatively slower migration and PIB molecules take time to settle on the film surface.