GST : 27AACCA9261A1ZZ
4.4/5
Our Products
We are leaders in the market for providing best range of Zinc Acetate Anhydrous, Sodium Dihydrogen Phosphate Anhydrous, Zinc Sulphate Heptahydrate, Trisodium Phosphate 12 Hydrate and Tetrasodium Diphosphate
Zinc acetate is a salt with the formula Zn (O2CCH3)2, which commonly occurs as the dihydrate Zn (O2CCH3)2(H2O) 2. Zinc Acetate anhydrous forms are colourless solids that are commonly used in chemical synthesis and as dietary supplements. Zinc acetates anhydrous are prepared by the action of acetic acid on zinc carbonate or zinc metal. When used as a food additive, it has the E number E650.Zinc acetate anhydrous is used in the synthesis of layered Zn-aryl phosphates with potential application in sorption, ion exchange or catalysis. It is utilized in the ultrasonic preparation of zinc sulphide Nano particles coated on silica particles.
Specifications
| Grade | Anhydrous |
|---|---|
| Mol. Wt. | 183.5 |
| Appearance | White Powder |
| Assay | 99 % Min |
| Zinc Content | 35 % min |
| Insoluble matter: | 0.1 % max |
| Chlorides: | 50 PPM max |
| Sulphates: | 50 PPM max |
| Iron: | 30 PPM max. |
| Lead | 5 PPM max |
The Di Sodium Phosphate also known as Sodium Phosphate Di Basic, Di Sodium Hydrogen Phosphate, Di Sodium Hydrogen Orthophosphate is sodium salt of phosphoric acid and occurs as a white powder which is highly water soluble and hygroscopic. Di-sodium Phosphate is obtained when a solution of phosphoric acid is reacted with caustic soda, until the higher PH is obtained.
Specifications
| Sr. No | Parameters | Unit | Specified value |
|---|---|---|---|
| 1 | Appearance | Visual observation | A white powder, hygroscopic. |
| 2 | Solubility (10% solution) | % w/v | Clear solution |
| 3 | pH of 5% solution | % w/v | 9.0 – 9.5 |
| 4 | Assay (LOD basis) | % w/w | 99.0% min |
| 5 | Phosphate (as P2O5) | % w/w | 49.0% min |
| 6 | Chloride (as Cl) | % w/w | 0.010% max. |
| 7 | Sulphate (as SO4) | % w/w | 0.010% max. |
| 8 | Iron (as Fe) | % w/w | 0.002% max |
| 9 | Lead (as Pb) | % w/w | 0.0005% max |
| 10 | Arsenic (as As) | % w/w | 0.0005% max |
| 11 | Loss on drying (at 120°C) | % w/w | 1.0 % max |
Zinc Sulphate Heptahydrate (IP) Nature- White crystal or crystalline powder zinc sulphate, which is a clear crystalline compound prepared by heating zinc sulphide ore in air, dissolving out and recrystallizing the sulphate. We packed our Zinc Sulphate Heptahydratein 25 kg Multicolour strong Woven Polypropylene bags with a PP inner liner. Depending on customer requirement we also pack in Jumbo bags (1.1Mts), 50 kg and 25 kg HDPE bags.
Specifications
| Sr. No | Parameters | Unit | Specified value |
|---|---|---|---|
| 1 | Appearance | Visual observation | Almost white to white crystalline powder. |
| 2 | Solubility (5% solution in water) | % w/v | Soluble & clear solution |
| 3 | PH (5% solution) | % w/v | Not less than 4.0 |
| 4 | Assay (as Zn) | % w/w | Min. 21.0% |
| 5 | Matter insoluble in water | % w/w | Max. 0.5% |
| 6 | Magnesium (as Mg) | % w/w | Max. 0.5% |
| 7 | Iron (as Fe) | % w/w | Max. 0.0005% |
| 8 | Heavy metal (as Pb) | % w/w | Max. 0.0005% |
Tri-sodium phosphate (TSP) is the inorganic compound. It is a white, granular or crystalline solid, highly soluble in water producing an alkaline solution. Tri-sodium phosphate is manufactured by neutralization of phosphoric acid solution using sodium hydroxides along with sodium carbonate. We do safe packaging for our product and use Hdpe bags and sack of 20, 25 kgs, 50 kgs or as per customer requirement. The Tri sodium we manufacture is properly shipped and verify to ensure timely delivery to our customer.
Specifications
| Sr. No | Parameters | Unit | Specified value |
|---|---|---|---|
| 1 | Appearance | Visual observation | A colourless crystals or white crystals or granules |
| 2 | Solubility (10% solution in water) | % w/v | Clear & colourless solution |
| 3 | PH (1% solution) | % w/v | 11.5 – 12.5 |
| 4 | Assay | % w/w | Min. 98.0% |
| 5 | Phosphate (as P2O5) | % w/w | Min. 18.3% |
| 6 | Chloride (as Cl) | % w/w | Max. 0.05% |
| 7 | Sulphate (as SO4) | % w/w | Max. 0.01% |
| 8 | Soluble Iron (as Fe) | % w/w | Max. 0.001% |
| 9 | Insoluble Substances | % w/w | Max 0.10% |
| 10 | Free sodium hydroxide (as NaOH) | % w/w | Max. 2.5% |
| 11 | Arsenic | % w/w | Max. 0.0005% |
| 12 | Heavy Metals (as Pb) | % w/w | Max. 0.001% |
We are a quality conscious organization, engaged in manufacturing, supplying and exporting premium quality Sodium Phosphate that is extensively used as a laxative and pH buffer. It is formulated by our team of experts in accordance with the set global industry standards utilizing optimum grade chemical substances. Sodium Phosphate is generally prepared from mined phosphate rock. It is widely used in food and water treatment.Our Sodium phosphate has high levels of purity and usefulness. These are formulated using high-quality chemicals, resulting in a product of high purity and chemical stability. The product can be obtained in custom quantities in three grades – Mono/Di/Tri. Also, our pricing is reasonable and our shipping is prompt.
Specifications
| Sr. No | Parameters | Unit | Specified value |
|---|---|---|---|
| 1 | Appearance | Visual observation | White powder, free flowing |
| 2 | PH (1% solution) | % w/v | 9.70 – 10.60 |
| 3 | Assay (as Na4P2O7) | % w/w | Min. 96.0% |
| 4 | Phosphate (as P2O5) | % w/w | Min. 51.5% |
| 5 | Insoluble matter in water | % w/w | Max. 0.2% |
| 6 | Chloride (as Cl) | % w/w | Max. 0.2% |
| 7 | Sulphate (as SO4) | % w/w | Max. 0.03% |
| 8 | Iron (as Fe) | % w/w | Max. 0.02% |
| 9 | Heavy metal (as Pb) | % w/w | Max. 0.001% |
| 10 | Loss on drying (at 105°C) | % w/w | Max. 1.0% |
Mr. Vipul Shah (Vinipul Inorganics Pvt. Ltd.)
1/3, Kandhari Colony, 2nd Road, Opposite Adarsh Hotel, Chembur, Mumbai, Maharashtra - 400071, India
https://www.vinipulinorganics.co.in
Share us via
