Any fastening required anywhere at any place, the standard nut comes into action.   Application Areas: Anywhere and everywhere, where there is a requirement of adjoining two objects with each other.   Our Range: Across Flats Range : All Flange Nuts form 14mm  to  24mm. Diameter Range  : Upto 30mm Length. Thread Range : All Threads and Pitch upto M32 and as per requirement.   Material Used: AISI 1010 AISI 1015 10B21 and 15B25 for High Tensile characteristics. Other Material can also be considered on customers request.

Serrated or plain the flange nuts are used without washers. These nuts are developed to be used alone and there is no need for a washer to be used as the nut is manufactured along with a washer attached. It saves the use of a washer and can be used directly giving more faster erection.   Application Areas: Flange Nuts are basically at the erection of high towers. These nuts can be used anywhere, where there is a need for fastening with a washer   Our Range: Across Flats Range : All Flange Nuts form 12mm  to  24mm Diameter Range  : All Round Flange Nuts from 16mm to 30mm Diameter. Length Range  : Upto 30mm Length Thread Range : All Threads and Pitch upto M32 and as per requirement.   Material Used: AISI 1010 AISI 1015 10B21 and 15B25 for High Tensile characteristics. Other Material can also be considered on customers request.

Weld Nuts comes in a very large variety. Some of which are ROUND WELD NUTS, HEX WELD NUTS, SQUARE WELD NUTS(JIS). Weld Nut are used where hands cannot reach after the erection is done, hence the nuts are welded in advance at the time of erection and sheet metal work in progress in vehicles and machineries. And we give perfect welding lags as per the required angles and dimensions given by our customers.   Application Areas: Used in all Small and Big vehicles at the time of  erection and sheet metal work. Also used in Many Machineries at the time of erection.   Our Range: Across Flats Range    : All Hex and Square Weld Nuts form 14mm  to  27mm. Diameter Range       : All Round Weld Nuts from 16mm to 30mm Diameter. Length Range         : Upto 30mm Length. Thread Range         : All Threads and Pitch upto M32 and as per requirement. Material Used: AISI 1010 AISI 1015 Other Material can also be considered on customers request.

Basically used in FUEL INJECTION PIPES for all Vehicles and HOSE PIPES for High Pressure Hydraulic Application. As the application of these nuts is for high pressure Cold Forged Nuts are more suitable for the same.   Cold Forged nuts have many advantages over the machined nuts like : High Strength as the Steel is formed by cold heading to obtain the required size and shape. The granules are not cut like the machined nuts but are  compressed and formed, therefore keeping the strength of the material intact. Gives a very good look with or without coating as the surface finish is obtained from very polished dies. Very good finish of the nuts with smooth and rounded corners enable the user to use the nut with ease.   Application Areas: Fuel Injection Pipes for all Vehicles. High pressure Hydraulic Hose Pipes for big earth moving equipments like JCBs etc. High Pressure Pneumatic pipes.   Threading: We provide the nuts to our customers with rolled threads. These threads are different from the regular threads and machined threads. As the application of these nuts are for very high pressures, Rolled threads are far more superior then the regular and machined threads in many ways like:   First and foremost, Rolled Threads are many times stronger then regular machined threads as the threads are formed with high pressure and the granules are compressed to form the thread. As there are unbroken flow lines with compressed grains the tensile strength and shear strength of the nut is increased due to cold working (please see the figure below). Therefore, the nut can resist the high pressure of hydraulic and pneumatic and hence resulting into Non- Failure of the product.   Very good surface finish of the threads as the threads are formed. Enabling the application of the nut with ease

All the cars, trucks, jeeps, buses, etc and all the means of transport use wheel nuts on one form or the other for the safe fastening and tightening of the wheels to the body.   Application Areas: Used in all Small and Big vehicles for the fastening of the wheels to the body   Our Range: Across Flats Range : All Wheel Nuts form 14mm  to  24mm. Diameter Range  : 16mm to 30mm Diameter. Length Range  : Upto 30mm Length. Thread Range : All Threads and Pitch upto M32 and as per requirement.   Material Used: AISI 1010 AISI 1015 Other Material can also be considered on customers request.

Any fastening required anywhere at any place, the standard nut comes into action.   Application Areas: Anywhere and everywhere, where there is a requirement of adjoining two objects with each other.   Our Range: Across Flats Range : All Flange Nuts form 14mm  to  24mm. Diameter Range  : Upto 30mm Length. Thread Range : All Threads and Pitch upto M32 and as per requirement.   Material Used: AISI 1010 AISI 1015 10B21 and 15B25 for High Tensile characteristics. Other Material can also be considered on customers request.

Serrated or plain the flange nuts are used without washers. These nuts are developed to be used alone and there is no need for a washer to be used as the nut is manufactured along with a washer attached. It saves the use of a washer and can be used directly giving more faster erection.   Application Areas: Flange Nuts are basically at the erection of high towers. These nuts can be used anywhere, where there is a need for fastening with a washer   Our Range: Across Flats Range : All Flange Nuts form 12mm  to  24mm Diameter Range  : All Round Flange Nuts from 16mm to 30mm Diameter. Length Range  : Upto 30mm Length Thread Range : All Threads and Pitch upto M32 and as per requirement.   Material Used: AISI 1010 AISI 1015 10B21 and 15B25 for High Tensile characteristics. Other Material can also be considered on customers request.

Weld Nuts comes in a very large variety. Some of which are ROUND WELD NUTS, HEX WELD NUTS, SQUARE WELD NUTS(JIS). Weld Nut are used where hands cannot reach after the erection is done, hence the nuts are welded in advance at the time of erection and sheet metal work in progress in vehicles and machineries. And we give perfect welding lags as per the required angles and dimensions given by our customers.   Application Areas: Used in all Small and Big vehicles at the time of  erection and sheet metal work. Also used in Many Machineries at the time of erection.   Our Range: Across Flats Range    : All Hex and Square Weld Nuts form 14mm  to  27mm. Diameter Range       : All Round Weld Nuts from 16mm to 30mm Diameter. Length Range         : Upto 30mm Length. Thread Range         : All Threads and Pitch upto M32 and as per requirement. Material Used: AISI 1010 AISI 1015 Other Material can also be considered on customers request.

Basically used in FUEL INJECTION PIPES for all Vehicles and HOSE PIPES for High Pressure Hydraulic Application. As the application of these nuts is for high pressure Cold Forged Nuts are more suitable for the same.   Cold Forged nuts have many advantages over the machined nuts like : High Strength as the Steel is formed by cold heading to obtain the required size and shape. The granules are not cut like the machined nuts but are  compressed and formed, therefore keeping the strength of the material intact. Gives a very good look with or without coating as the surface finish is obtained from very polished dies. Very good finish of the nuts with smooth and rounded corners enable the user to use the nut with ease.   Application Areas: Fuel Injection Pipes for all Vehicles. High pressure Hydraulic Hose Pipes for big earth moving equipments like JCBs etc. High Pressure Pneumatic pipes.   Threading: We provide the nuts to our customers with rolled threads. These threads are different from the regular threads and machined threads. As the application of these nuts are for very high pressures, Rolled threads are far more superior then the regular and machined threads in many ways like:   First and foremost, Rolled Threads are many times stronger then regular machined threads as the threads are formed with high pressure and the granules are compressed to form the thread. As there are unbroken flow lines with compressed grains the tensile strength and shear strength of the nut is increased due to cold working (please see the figure below). Therefore, the nut can resist the high pressure of hydraulic and pneumatic and hence resulting into Non- Failure of the product.   Very good surface finish of the threads as the threads are formed. Enabling the application of the nut with ease

All the cars, trucks, jeeps, buses, etc and all the means of transport use wheel nuts on one form or the other for the safe fastening and tightening of the wheels to the body.   Application Areas: Used in all Small and Big vehicles for the fastening of the wheels to the body   Our Range: Across Flats Range : All Wheel Nuts form 14mm  to  24mm. Diameter Range  : 16mm to 30mm Diameter. Length Range  : Upto 30mm Length. Thread Range : All Threads and Pitch upto M32 and as per requirement.   Material Used: AISI 1010 AISI 1015 Other Material can also be considered on customers request.