Capacity of turning black bar (dia) : 16mm-50mm 25mm-75mm Type of cutter head: Duplex type with pressure roller & carbide button tool.Depth of cut on surface: 2 mmThe machine will have geared head with a hallow spindle. Mounted at each end antifriction bearing. The geared head have eightspandle speeds and having hardended gears.

Working Principle : The bar to be turned is supported between an entry guide and steedy rollers.The cutting tools is mounted in a cutter head which in turn is fixed on a revolving spindle and the bar to be trun is move by feed rollers against the revolving cutter head on the bar.

Capacities :Capacity of turning black bar (dia) : 16mm-50mm 25mm-75mm Type of cutter head: Duplex type with pressure roller & carbide button tool.Depth of cut on surface: 2 mm Turning Head Stock :The machine will have geared head with a hallow spindle. Mounted at each end antifriction bearing. The geared head have eight/spandle speeds and having hardended gears. Feed Rolls :Axial feed of power into the turning head is done with the help of feed rolls. The rotation of these rolls feed the bar into turning head with specified rate. the rotational speed of feed rolls is variable to suit the size of the bars. the drive is effected from a separate motor through V belts pulleys. The feeding rollers will be of high carbon High Carbon High chrome steel duly hardended.
Base :The base of the machine will be rigid C.I. Casting on which the geared head and feed gear box assemblies are mounted.
Cutter head :One set of cutter head is required to cover the complete range of sizes. The cutter head consists of one Tungsten Carbide button tool holder and three suitably profiled pressure rollers with one Tungsten Carbide guide. The adjustment is provided for setting the tools holder, pressure rolls and guide. The whole assembly is fixed to the hollow spindle. The cutter head can be easily removed & can set to cut different dia of the bars using a setting base. Input & output Carriage :For supporting and preventing the rotation of the bar one input & one output carriages are provided on either side of the machine. The carriages run on round bars of 15 ft. approximate both side of the machine. Coolant System :Constant flow of mineral based cutting oil is splattered on cutter head to cool the tool and rollers.

The length of the machine will be of 30 ft. approx. The gear box will have four speed change system having casehardened gears. The machine will be proved with drawing carriages fro single drawing. Carriage and die head block for double drawing will have extra price.

ength of The Machine :The length of the machine will be of 30 ft. approx. Construction of The Frame :The Frame of the machine will be of channels and the chain on the upper and lower side will be supported by channels. Gear Box :The gear box will have four speed change system having casehardened gears.
Drawing Carriages & Die Block :The machine will be proved with drawing carriages fro single drawing. Carriage and die head block for double drawing will have extra price.
Carriages Back Mechanism :An Automatic Carriage back mechanism will be provided with the machine.

Tejinder Round Bar Straightening Machine of reeling type are must for all Manufacturers of bright bar drawn shafting will find better advantages and finish to straighten bars before turning components being manufactured. The beauty of our design are to incorporate maximum possible facilities their users incurring extra investments. We have a standard practise of seasoning our casting and stress relivnig our all fabricated structures.

Tejinder Round Bar Straightening Machine of reeling type are must for all Manufacturers of bright bar drawn shafting will find better advantages and finish to straighten bars before turning components being manufactured. The beauty of our design are to incorporate maximum possible facilities their users incurring extra investments. We have a standard practise of seasoning our casting and stress relivnig our all fabricated structures.

The length of the machine will be of 30 ft. approx.The Frame of the machine will be of channels and the chain on the upper and lower side will be supported by channels.

Tejinder Drawing Section Straightening Machine, cutting, Polishing is first of its kind manufactured indigenously for Cold Bright Bar Drawing. It gives Bright Bar Drawing, straightening of any rolled, Drawn, Ferrous or Non Ferrous solid section in cold condition. This machine is engineered to give trouble free long life.

Tejinder Drawing Section Straightening Machine, cutting, Polishing is first of its kind manufactured indigenously for Cold Bright Bar Drawing. It gives Bright Bar Drawing, straightening of any rolled, Drawn, Ferrous or Non Ferrous solid section in cold condition. This machine is engineered to give trouble free long life.

Accessories :

• With Coil Stand and Pay Off Stand.
• With 12.5 H.P and 2 H.P Motor.
• With Panel Board & SLD Break.
• With 1 Limit Switch.

Size :As Per Customer Requirement Note : As we are constantly striving for improvement, we reserve the right to modify the design and price of the machines without notice.

Tejinder Combine Drawing straightening, cutting, Polishing is first of its kind manufactured indigenously for Cold Bright Bar Drawing. It gives Bright Bar Drawing, straightening of any rolled, Drawn, Ferrous or Non Ferrous solid section in cold condition. This machine is engineered to give trouble free long life.

rawing Machine:Drawing Machine is of box construction type made of heavy steel structure. it is provided with carbide TC die which ensures accurate & consistent drawing of Bright Bar upto 2.5 mm Minimum. All gears are made of hardened Alloy Steel. To reduce overheating during operation oil is filled into the body. This also ensures the free movement of gear train & thus trouble free working of drawing machine. the wire thus drawn is coiled or machine itself. Straightening and cutting:Straightening and cutting off machines are used wherever wire is further process in the form of rods and where accurate straightening of coiled wire, clean cut, close length tolerances & high output are of importance.

Body & Base:machine is multiplate box construction type assembled on a rigid Base plate. The Space in between two housing has been utilised to accommodate gear train of bottomspindledrive. The base of machine is fabricated out of M.S Channels and Plates. On this platform, the body of machine, reduction gear box and electric motor are mounted, thus making machine self contained. A very light foundation is required. Control:The machine is equipped with master On-Off Switch. An extra control Panel is provided which is enclosed type, easily accessible for better monitoring complete with Transformer, Contractors & fuses. The Straightening:The oscillating rotating spinner isan advantageous feature when dealing with oscillationg movement during the cutting operation prevents to a great extent the wire from tearing or becoming deformed (forming knots).The rotating spinner contains five pairs of straightening block which are easily and quickly adjusted. Being liable to natural wear, they are of simple design to enable the user to make replacement in his own works. The Cutting Off:The cutting-off Tool-Flying share (60" moment) is of a simple construction, easy to adjust. Flying share cuts & push the bar into the polishing unit.

Capacity of turning black bar (dia) : 16mm-50mm 25mm-75mm Type of cutter head: Duplex type with pressure roller & carbide button tool.Depth of cut on surface: 2 mmThe machine will have geared head with a hallow spindle. Mounted at each end antifriction bearing. The geared head have eightspandle speeds and having hardended gears.

Working Principle : The bar to be turned is supported between an entry guide and steedy rollers.The cutting tools is mounted in a cutter head which in turn is fixed on a revolving spindle and the bar to be trun is move by feed rollers against the revolving cutter head on the bar.

Capacities :Capacity of turning black bar (dia) : 16mm-50mm 25mm-75mm Type of cutter head: Duplex type with pressure roller & carbide button tool.Depth of cut on surface: 2 mm Turning Head Stock :The machine will have geared head with a hallow spindle. Mounted at each end antifriction bearing. The geared head have eight/spandle speeds and having hardended gears. Feed Rolls :Axial feed of power into the turning head is done with the help of feed rolls. The rotation of these rolls feed the bar into turning head with specified rate. the rotational speed of feed rolls is variable to suit the size of the bars. the drive is effected from a separate motor through V belts pulleys. The feeding rollers will be of high carbon High Carbon High chrome steel duly hardended.
Base :The base of the machine will be rigid C.I. Casting on which the geared head and feed gear box assemblies are mounted.
Cutter head :One set of cutter head is required to cover the complete range of sizes. The cutter head consists of one Tungsten Carbide button tool holder and three suitably profiled pressure rollers with one Tungsten Carbide guide. The adjustment is provided for setting the tools holder, pressure rolls and guide. The whole assembly is fixed to the hollow spindle. The cutter head can be easily removed & can set to cut different dia of the bars using a setting base. Input & output Carriage :For supporting and preventing the rotation of the bar one input & one output carriages are provided on either side of the machine. The carriages run on round bars of 15 ft. approximate both side of the machine. Coolant System :Constant flow of mineral based cutting oil is splattered on cutter head to cool the tool and rollers.

The length of the machine will be of 30 ft. approx. The gear box will have four speed change system having casehardened gears. The machine will be proved with drawing carriages fro single drawing. Carriage and die head block for double drawing will have extra price.

ength of The Machine :The length of the machine will be of 30 ft. approx. Construction of The Frame :The Frame of the machine will be of channels and the chain on the upper and lower side will be supported by channels. Gear Box :The gear box will have four speed change system having casehardened gears.
Drawing Carriages & Die Block :The machine will be proved with drawing carriages fro single drawing. Carriage and die head block for double drawing will have extra price.
Carriages Back Mechanism :An Automatic Carriage back mechanism will be provided with the machine.

Tejinder Round Bar Straightening Machine of reeling type are must for all Manufacturers of bright bar drawn shafting will find better advantages and finish to straighten bars before turning components being manufactured. The beauty of our design are to incorporate maximum possible facilities their users incurring extra investments. We have a standard practise of seasoning our casting and stress relivnig our all fabricated structures.

Tejinder Round Bar Straightening Machine of reeling type are must for all Manufacturers of bright bar drawn shafting will find better advantages and finish to straighten bars before turning components being manufactured. The beauty of our design are to incorporate maximum possible facilities their users incurring extra investments. We have a standard practise of seasoning our casting and stress relivnig our all fabricated structures.

The length of the machine will be of 30 ft. approx.The Frame of the machine will be of channels and the chain on the upper and lower side will be supported by channels.

Tejinder Drawing Section Straightening Machine, cutting, Polishing is first of its kind manufactured indigenously for Cold Bright Bar Drawing. It gives Bright Bar Drawing, straightening of any rolled, Drawn, Ferrous or Non Ferrous solid section in cold condition. This machine is engineered to give trouble free long life.

Tejinder Drawing Section Straightening Machine, cutting, Polishing is first of its kind manufactured indigenously for Cold Bright Bar Drawing. It gives Bright Bar Drawing, straightening of any rolled, Drawn, Ferrous or Non Ferrous solid section in cold condition. This machine is engineered to give trouble free long life.

Accessories :

• With Coil Stand and Pay Off Stand.
• With 12.5 H.P and 2 H.P Motor.
• With Panel Board & SLD Break.
• With 1 Limit Switch.

Size :As Per Customer Requirement Note : As we are constantly striving for improvement, we reserve the right to modify the design and price of the machines without notice.

Tejinder Combine Drawing straightening, cutting, Polishing is first of its kind manufactured indigenously for Cold Bright Bar Drawing. It gives Bright Bar Drawing, straightening of any rolled, Drawn, Ferrous or Non Ferrous solid section in cold condition. This machine is engineered to give trouble free long life.

rawing Machine:Drawing Machine is of box construction type made of heavy steel structure. it is provided with carbide TC die which ensures accurate & consistent drawing of Bright Bar upto 2.5 mm Minimum. All gears are made of hardened Alloy Steel. To reduce overheating during operation oil is filled into the body. This also ensures the free movement of gear train & thus trouble free working of drawing machine. the wire thus drawn is coiled or machine itself. Straightening and cutting:Straightening and cutting off machines are used wherever wire is further process in the form of rods and where accurate straightening of coiled wire, clean cut, close length tolerances & high output are of importance.

Body & Base:machine is multiplate box construction type assembled on a rigid Base plate. The Space in between two housing has been utilised to accommodate gear train of bottomspindledrive. The base of machine is fabricated out of M.S Channels and Plates. On this platform, the body of machine, reduction gear box and electric motor are mounted, thus making machine self contained. A very light foundation is required. Control:The machine is equipped with master On-Off Switch. An extra control Panel is provided which is enclosed type, easily accessible for better monitoring complete with Transformer, Contractors & fuses. The Straightening:The oscillating rotating spinner isan advantageous feature when dealing with oscillationg movement during the cutting operation prevents to a great extent the wire from tearing or becoming deformed (forming knots).The rotating spinner contains five pairs of straightening block which are easily and quickly adjusted. Being liable to natural wear, they are of simple design to enable the user to make replacement in his own works. The Cutting Off:The cutting-off Tool-Flying share (60" moment) is of a simple construction, easy to adjust. Flying share cuts & push the bar into the polishing unit.