Our Products
We are offering soil moisture recorder, temperature recorder. The automatic soil moisture suction & soil temperature recorder is a complete system for monitoring, logging and graphing 7 point soil moisture & 1 point soil temperature readings. automatically reads the sensors, 12v battery powered monitor, battery charging through solar panels, reading frequency from every minute to every day and adjustable to suit you, 8 sensor capacity, includes temperature probe, in-field display of current reading, download the history to a computer through pockable data shuttle, monitor current values. Data is saved in excel format and can be exported.
time / revolution counters commonly used with water current meter for velocity measurement in river and canals.
.
Flowmeter developed for use under various challenging field conditions. Its different impellers measure almost any fluid, liquid or gaseous medium. Fluid measurements can be taken in knots, km/h, mph, and m/s. The meter also takes temperature measurements in either F or C, including minimum and maximum temperature and current temperature. Also included is a wind speed impeller which allows you to take air velocity and wind chill measurements. To take flow measurements from a bridge or other elevated location, use the optional flow sensor with 15 meter cable (sold separately). Kit includes the display, 1.2m aluminum telescoping rod with 2m cable, a 60mm water impeller, 20mm air impeller and carrying case.
We are offering propeller type water current meter. This current meter is suspended in the water using a cable with sinking weight or wading rod and will accurately measure stream flow velocities from 0.3 to 3.5 meters per second with multiple propellers. (also available in measuring range up to 6 meter per second) magnetic current meter has a permanent magnet mounted on its shaft. In every revolution of the cup wheel the magnet actuates the proximity resulting in one make and break of the contacts. Manufactured as per is 3910 1966.
We are offering double ring soil infiltrometer. The double ring infilltrometer is a simple instrument which is used to determine the infiltration rate of water into the soil. The infiltration rate is determinate as the amount of water per surface area and time unit, which penetrates the soils. This rate can be calculated on the basis of the measurements and the darcy's law. Several measurements can be executed simultaneously, yielding a very reliable and accurate mean result. As vertically infiltrated water runs away to the side. The outer ring of the infiltrometer serves as a separation. The measurement exclusively takes place in the inner ring through which the water runs virtually vertically. The instrument consists of two rings, driving plate, for inner and outer rings. The two rings are driven into the ground and partially filled with water. The double ring design helps prevent divergent flow in layered soils. The outer ring acts as a barrier to encourage only vertical flow from the inner ring. The standard set of the double ring infiltrometer consist of 2 steel rings with different diameters, a hammer, floats, a stainless steel hammering cross and a stopwatch.
Additional Information:
Payment Terms : T/T
Delivery Time : 4 weeks
We are offering sound level meter. Sound level meter or sound meter is an instrument which measures sound pressure level, commonly used innoise pollution studies for the quantification of different kinds of noise, especially for industrial and environmental.
We are offering pygmy size water current meter. this current meter is used with wading rod and will accurately measure shallow stream flow velocities from 0.01 to 3.5 meters per second. Manufactured as per is 3910 1966. You can connect this current meter to an automatic counter water velocity indicator (sold separately). the calibration chart provided with the meter gives the velocity in msec
We are offering cup type water current meter. You can use cup type current meter using a cable with sinking weight or wading rod and will accurately measure stream flow velocities from 0.3 to 3.5 meters per second with cups. (also available in measuring range up to 6 meter per second) the cup type current meter manufactured as per is 3910 1966. You can connect this current meter to an automatic counter water velocity indicator (sold separately). the calibration chart provided with the meter gives the velocity in msec
We are offering soil moisture tension meter. The virtual make digital soil moisture tension meter, used with the soil moisture (watermark) sensors and soil temperature sensor (optional), make up a valuable system to monitor the soil moisture, tension & temperature (optional) available in your soil. You can use as many sensors as you like at representative sites. Then, using the digital soil moisture meter you can read each sensor individually as frequently as necessary. The importance of water to plant growth is well known. Also, effective irrigation should be properly controlled in quantity and timing.
We are offering soil moisture meter. a sensitive electrode measures ph values from 3.5 to 8, soil moisture from 0 to 100%. Requires no chemical, distilled water, or outside electric power source. Numerous readings can be easily taken over large area. 6-12"l. Leather-like case with belt loop and full instructions included. Ph accuracy: 0.2. Moisture accuracy: 10%
We are offering suspended solids indicator. The suspended solids indicator is a state of the art, easy to use meter that provides many benefits to the plant operations staff. It is a unique system that combines advanced electronics with a solid-state, optical sensor. It is a multi-range indicator designed for the measurement of suspended solids in aqueous solutions. The microprocessor-based electronics of the indicator provide a high degree of flexibility and ease of use. Data logging and the ability to download the data directly to a computer are optional features.