Write a Review
Our Products
We offer the best product range of Incoloy Alloy Plates, Monel Alloy Plates, Titanium Alloys Plates and Copper Nickel Alloy Plates.
Vision Alloys are one of the main Manufacturers, Supplier and Exporters of Inconel 600/601/625/718 Alloy Plates & Sheets. Vision Alloys offer quality Inconel 600/601/625/718 Sheet and Plates to our clients over the globe. These Inconel 600/601/625/718 Sheet and Plates highlights astounding disintegration resistance, high versatility level and sturdiness. Further, these are available in different sizes as indicated by the requirements of our clients.
Being an especially convincing, slope and fast moving affiliation, we are greatly progressive in giving an expansive show of Inconel 600/601/625/718 Sheet and Plates. As per the ASTM standards, these mechanical Inconel 600/601/625/718 Sheet and Plates are manufactured by our industry-stars with a particular final objective to make a predominant quality degree. Offered lifted quality cutting edge Inconel 600/601/625/718 Sheets and Plates are made available in different assessments to meet overall quality gauges.
| Inconel 600 | Ni | Fe | C | Mn | Si | Cu | Cr | S |
|---|---|---|---|---|---|---|---|---|
| 72.0 min | 6.0 - 10.0 | 0.15 max | 1.0 max | 0.5 max | 0.5 max | 14.0 - 17.0 | 0.015 max |
| Inconel 601 | Ni | Fe | C | Mn | Si | Cu | Cr | S | Al |
|---|---|---|---|---|---|---|---|---|---|
| 58.0 – 63.0 | Balance | 0.10 max | 1.0 max | 0.5 max | 1.0 max | 21.0 – 25.0 | 0.015 max | 1.0 – 1.7 |
| Inconel 625 | Ni | Fe | C | Mn | Si | Cr2 | Mo | Co | Al | Ti | Nb + Ta | P | S |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 58.0 min | 5.0 max | 0.10 max | 0.50 max | 0.50 max | 20.0-23.0 | 8.0-10.0 | 1.0 max | 0.40 max | 0.40 max | 3.15–4.15 | 0.015 max | 0.015 max |
| Inconel 718 | Ni | Fe | C | Mn | Si | Cu | Cr | S | Mo | Co | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50.00-55.00 | Remainder | 0.08 | 0.35 | 0.35 | 0.30 | 17.00-21.00 | 0.015 | 2.80-3.30 | - | 0.20-0.80 | 0.65-1.15 |
Vision Alloys are one of the main Manufacturers, Supplier and Exporters of Monel 400/K500 Alloy Plates & Sheets. Vision Alloys clients can profit by us quality extent of Monel Sheets, Plates and Coils that is available in assessments like Monel 400 (UNS No. N04400) and Monel 500 (UNS No. N05500). Made as per worldwide quality benchmarks, our degree is for the most part perceived for high unbending nature, rust check and strength. We in like manner adjust as indicated by the specific essentials of the clients and pass on them inside stipulated time.
Inferable from years of industry experience and learning, we have had the ability to offer an exceptional quality Monel 400/K500 Sheets & Plates. Our offered extent of Monel 400/K500 Sheets, Plates is delivered and made using first class material and driving edge advancement according to worldwide quality models.
| Grade | Ni | Fe | C | Mn | Si | Cu | Al | S |
|---|---|---|---|---|---|---|---|---|
| Monel 400 | 63.0 min | 1.0 – 2.5 | 0.3 max | 2.0 max | 0.5 max | 28.0 – 34.0 | 0.50 max | 0.02 max |
| Grade | Ni | Fe | C | Mn | Si | Cu | Al | Ti | S |
|---|---|---|---|---|---|---|---|---|---|
| Monel K-500 | 63.0 min | 05 - 2 | 0.25 max | 1.5 max | 0.5 max | 27.0 - 33.0 | 2.3 - 3.15 | 0.35 - 0.85 | 0.010 max |
Vision Alloys is one of the main Manufacturers, Suppliers and Exporters of top notch Titanium Grade 1 Sheets & Plates. Our Titanium Grade 1 Sheets & Plates are testimonials of our quality principles.
Commercially Pure Titanium Grade 1 Sheets & Plates is one of the mildest and most pliable evaluations displaying the best formability. It has astounding corrosion resistance property, great weldability and is utilized as a part of a wide assortment of utilizations. This evaluation material is basically utilized as a part of marine and compound commercial enterprises where the parts are subjected to exceptionally harsh environments. This material is likewise utilized for creating anodes for cathodic protection applications. These Titanium Grade 1 Sheets & Plates are utilized as a part of different application industry. Working towards the point of customer fulfillment, we offer these items at the most reasonable industry costs.
| Hardness, Brinell | 120 | 120 | annealed |
|---|---|---|---|
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| Elongation at Break | 24 % | 24 % | |
| Reduction of Area | 35 % | 35 % | |
| Modulus of Elasticity | 105 GPa | 15200 ksi | In Tension |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poisson's Ratio | 0.37 | 0.37 | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Shear Modulus | 45 GPa | 6530 ksi |
Being an established association, Vision Alloys are putting forth a colossal scope of Copper Nickel 70/30 Plates & Sheets. The offered Copper Nickel 70/30 Plates & Sheets is fabricated under the direction of specialists by utilizing predominant quality copper. Our Copper Nickel 70/30 Plates & Sheets is checked by specialists on various parameters with a specific end goal to convey a defect free range. This Copper Nickel 70/30 Plates & Sheets is exceedingly refreshing for their corrosion resistance, rigidity and cost viability.
Vision Alloys provides Copper Nickel 70/30 Plates & Sheets which has some of the best features such as Excellent mechanical & magnetic properties, High thermal & electrical conductivity and Anti corrosive.
These 70/30 Cu-Ni Plates & Sheets in accessible diverse evaluations, detail and thickness according to the customers necessities. These are broadly utilized as a part of different application industry, for example, Cement industry, Power Industry, Sugar Mills, Chemical Plants, Pharmaceuticals and so on.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength, ultimate | 372-517 MPa | 54000-75000 psi |
| Tensile strength, yield (depending on temper) | 88.0-483 MPa | 12800-70100 psi |
| Elongation at break (in 381 mm) | 45.0% | 45.0% |
| Charpy impact | 107 J | 78.9 ft-lb |
| Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% | 20% |
| Shear modulus | 57.0 GPa | 8270 ksi |
| Poisson's ratio | 0.34 | 0.34 |
| Elastic modulus | 150 GPa | 21800 ksi |
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.94 g/cm3 | 0.323 lb/in3 |
| Melting point | 2140°F | 1171°C |
Jitendra P. Jain (Vision Alloys)
6, Lad Niwas, 42/62, Ardeshir Dady Street - , Girgaon, Mumbai, Maharashtra - 400004, India
Share us via
