Our Products
Pump Care is a dry polymer based powder concrete pump primer, easily miscible in water and is available in pre-measured pack. It is uniquely formulated to provide the concrete pumper with a cost effective method for improving the pump ability of hard to pump and/or harsh concrete and grout mixes.
Uses : Vista Pump Care contains water thickeners and lubricating agents. As it goes through the pipes, leaves a coat of water and lubricating agents and effectively wets all surfaces. So when concrete comes behind the Vista Pump Care, it does not lose water. The phenomenon of friction when the concrete passes through long pipelines get reduced and the lubrication effect of the compound makes concrete pass smoothly without chocking of the pump and pump line. It does not contain bentonite, chloride, nitrates. nitrites or other potentially corrosive materials and is compatible with all standard concrete admixtures.
Advantage :
Application : One pack of 200 gm is to be mixed with 40 ltrs of water in a vessel till greasy condition is achieved, further mix the solution to loo ltrs of water for 3 - 5 minutes for complete dissolution and then pump the mixture through the pump line before pumping of concrete. The slurry produced from one pouch will be sufficient for pumping 60-70 meters length of pipeline.
Shelf Life : 24 months in sealed condition from the date of manufacture. Container should be protected from direct sunlight.
Additional Information:
Packaging Details : 200 gm pouch pack
For years, we are engaged in dealing of Lake Restoration, as we are its reckoned supplier in the market. The range, we offer, is stringently checked for the raw material used; our quality auditors ensure that the final product is sternly designed using the beat in class inputs to bring forth quality range.
Additional Information:
Packaging Details : Cans, Containers
Description : Supplied as a two part material in pre weighed quantities for ready onside mixing and use
Uses : For bonding new cementitious materials to existing cementitious surfaces. For use on horizontal surfaces and on vertical surfaces where mortar or concrete can be supported by formwork
substitute of betonite at much lesser cost, with environment friendly properties, low labour cost, low management cost etc
approved by highest authorities of india viz airport authority of india, delhi metro railway corporation etc
.
Description : Concrete curing compound to prevent premature water loss from concrete. It is based on synthetic film forming resin and leafing grade micro fine Aluminum pigment
Uses : Benefit for large area concrete surface, highway- Road construction, Airport Runways and Bridge works, Pre stressed beam and peers, Exposed Surface of Dams, Slopping and angular surface where pond curing is not possible
Description : High quaky ready mix cement based tile adhesive, conforming to IS: 15477-2004
Uses : For the permanent fixing of ceramic and mosaic tiles on wall, floor, wet are. like kitchen and Bathrooms
Description : Normal setting waterproof semi paste additive for concrete and mortar conforms to IS: 2645-2003.
Uses : To reduce permeability of concrete and mortar for use in basement,
The packaging commences strictly under the guidance of veteran experts and professionals, thus ensuring optimum packaging, keeping the products safe from various damaging factors. We are Kolkata(India) based entity, engaged in making available top-of-the-line quality products in the domestic market.
It is a strong herbal anti insect formulation. White thick liquid with a fresh fragrance.
Advantage :
Ingredients :
Uses : Shake the bottle. Add one cap full to half of a bucket of water. Mix with water and wipe floor, kitchen, toilet as usual way.
Technical Data SheetProduct and Company Identification :
Company / Supplier Identification :
Technical Data
Aspect | Milky White slight Viscous liquid |
---|---|
Perfume | Mild floral |
Color | Milky White |
Active Substance [%] | 6%± l.0 |
Ph | 7.0 t 0.5 |
Density | 1.01 |
Technical Specification
Material | %- Range |
---|---|
Pine Oil | 3 – 6% |
Anionic Detergent | 0.1 – 1% |
Others | 0.1 – 1% |
The Crack stop range of monofilament polypropylene fibres reduce the occurrence of plastic shrinkage and plastic settlement cracking, whilst enhancing the surface properties and durability of hardened cementitious products. Crack stop fibres are extremely fine, single filaments, cut to lengths of either 3, 6, 12 and 18 mm. Some fibre types also have blended lengths. The fibres are coated with surfactant to improve initial dispersion within the cementitious materials.
Advantages & Benefits
General Applications
Mixing Directions : Crack stop fibres should ideally be added at the batching plant although in some instances this may not be possible and addition at site will be the only option. If mixing at the batching plant, fibres should be the first constituent, along with half the mixing water. After all the other ingredients have been added, including the remaining mixing water, the concrete should be mixed for a minimum of 70 revolutions at full speed to ensure uniform fibre dispersion. In the case of site mixing, a minimum of 70 drum revolutions at full speed should take place.
Packing & Dispensing : Crack stop fibres are packed in the desired measured quantities in either degradable/pulpable paper bags or plastic bags. The paper bags can be added to the truck or plant mixer unopened. Plastic bags will need to be opened and the fibres added manually. Bagged fibres are placed in boxes for ease of handling. Crack stop fibres can also be ordered in bulk quantities and packed in boxes or super sacks of various sizes between 20-200 kg. The larger units are specifically designed for projects where fibre dosage machinery is available.
Storage : Crack stop fibres must be stored on a clean surface, in dry conditions, under cover and away from the possibility of damage.
Quality Assurance : The Quality Management Systems of facilities have been approved to the ISO 9001 Quality Management System Standard. Certificates are available on request. Products are manufactured to exacting standards on technologically advanced production and packaging lines, which allow constant monitoring of quality. Quality audits are conducted at our manufacturing plants.
Technical Advice : Our technical specialists are available to assist you in the correct use of all products.
Design Service : For all concrete floor design requirements please consult your representative.
Total Solution Provider : We offer a full design service for products. Our expertise and knowledge of the construction industry means that we can offer our customers bespoke solutions in terms of engineered proposals, concrete mix designs, packaging configurations, high standards of distribution and fibre dosage equipment.
Description : High Concentrate waterproof polymer based strong tile fixer
Uses : For fixing of tile on floor, walls, stairs bathrooms kitchen, laboratories hotels, shopping malls, swimming pool etc.
Description : Based on Low viscosity emulsion pigmented with titanium-di-oxide for reflection of sunlight to dissipate surface heat
Uses : Very useful for large area concrete surface, highway-Road construction, Airport Runways, Apron and hard standing, Pre stressed beam and piers, Exposed Surface of Dams, Retaining walls, Canal Lining
Description : Blend of specially selected cements, fillers and synthetic organic polymers for ready to use
Uses : As a grout for tile joint. for kitchen, bathroom, swimming pool
Description : Low viscous mineral oil based shutter release agent Ready for direct application and use
Description : Concentrated and emulsified chemical shutter release agent
Uses : Easy stain free release of concrete mould and frame of all types particularly where wooden formwork is used and demoulding or stripping times exceed 24 hours.
Dosage/Coverage : 1 Ltr when diluted with 5-6 Ltr water will cover- 30 to 60 sqm/ltr (wood) 40 to 60 sqm/ltr (steel or plastic)
Indication : Useful for Acute or Chronic Arthritis, Ghoul, Spondylitis Muscle pain, Joint pain, Traumatic pain. Now muscle pain or Rheumatism is the great problem of human being in our country. There are two types of pain -Local pain &. Systemic pain. Pain oil & Capsule is ideal for only muscle pain, Backache, Joints pain, Sprains and Cramp. The ingredients are therapeufically proven that it penetrate swiftly to the area of pain. The ingredients are nano shaped and of fully organic components.
Direction of use and Dose : Sufficient quantity of massage oil ( 20 fo 25 drops ) on the affected area and gently massage up to 10 minutes , 2-3 times daily. After massage apply hot compress up to 5 to 10 minutes.
It is a blue coloured thick liquid of 3 in 1 unique formulation, an effective soil remover.
Advantage :
Ingredients :
Uses : Flush toilet before cleaning. Direct nozzle under the toilet bowl rim to coatinside of bowl. Squeeze bottle gently and apply few drops to entire bowl and allow 5 minutes for sanitizing. Then brush for thorough cleaning of entire bowl. Then flush and get a sparkling clean toilet.
Technical Data
Material | %- Range |
---|---|
Hydrochloric acid | 0.1 - 2% |
Quatemary ammonium compounds | 0.1 - 2% |
Ethoxylated amine | 0.1 - 4% |
Aspect | Blue Viscous liquid |
Perfume | Mild Salicylic |
Color | Blue |
Active Substance [%] | 10 ± 0.5 |
PH | 2.0 ± 0.5 |
Density | 1.05 |
Viscosity | 1600 ± 300 |
It is most essential for all types of constipation. This remedy stimulates the mucous membrane of the great gut, intestinal glands. It also increases the peristaltic movement of the great intestine and rectum. This medicine is powerful remedy on the intestine and it keeps the intestinal lymph & lymphatic circulation corresponding to the blood circulation. It also exe crates the waste product from the intestinal wall.
lndication : Useful for Acute or Chronic constipation, Old age, constipation, Abdominal troubles & pain, Hyper acidity
Dose : For Adult 2 tsf with 2 cup Warm Water after food, For Children % of adult dose Or as directed by physician.
Description : White cement based waterproof plaster for interior and exterior application
Uses : It protects as well as decorates cement plaster and concrete structure both interior and exterior.
It is a clear thin liquid with a pleasant fragrance. It contains Bezalkonium Chloride, the most effective ingredients kills, all types of household germs.
Ingredients :
Warning : Please keep out of reach of children & pets, avoid contact with eyes, do not ingest. If swallowed, drink water and contact your physician.
Advantage :
Technical Data Sheet Chemical Characterization : Most powerful toilet cleaner. Helps eliminate tough stains & bad odor. An aqueous solution of Hydrochloric acid and surfactants
Technical Data
Material | %- Range |
---|---|
Hydrochloric acid | 5 -152% |
Quatemary ammonium compounds | 0.1 - 2% |
Ethoxylated amine | 0.1 - 4% |
Engineered to replace steel mesh or steel fibres in precast and sprayed concrete, ground supported internal slabs and external hard standings, S36 is the latest addition to the range of embossed macro synthetic fibres. Thanks to a unique fibre shape and state-of-the-art extrusion technology applied in the manufacture of S36 this fibre is outperforming its alternatives.
Why choose S36 ? S36 is the result of extensive in-house research & development work and in-depth performance testing by independent laboratories. This fibre is raising the bar for concrete reinforcement using macro synthetic fibres:
Advantages & Benefits : The benefits, which macro synthetic fibres bring to construction sites around the world are numerous. Examples encompass :
Has engineered S36 into an innovative fibre shape creating an increased specific surface. This design is outperforming conventional round shaped macro synthetic fibres. Another plus is the reduced thickness and enhanced strength of S36 fibres. They make for a significantly increased amount of fibres per m3, thus creating improved concrete reinforcement over conventional fibres.
Packaging & Dispersing : S36 fibres are packed into pucks wrapped in a water soluble film. Cased into paper bags, they can be tipped complete with the fibres directly into the concrete pan mixer or truck mixer. The dosage rates are dependent on the specific application. offers flexible packing configurations to suit the dosage and type of concrete plant.
Mixing Directions : The fibre is best dispersed when added to a forced action pan mixer or equivalent, prior to discharging the concrete into a truck. It is suggested that you contact your representative to discuss the preferred mixing method.
Storage : S36 must be stored on a clean surface in dry conditions and protected from potential sources of damage.
Quality Assurance : S36 complies to EN 14889 – 2 : 2006 (EC Certificate of Conformity). The Quality Management of has been approved to the ISO 9001 & 14001 Quality Management System Standards. Products are manufactured to exacting standards on technologically advanced production and packaging lines allowing constant monitoring of quality.
Call today to find out how you can take advantage of S36 with your next project : Any and all data of this publication can be subject to change without notice and are provided strictly as information only, without charge or obligation and/or without any warranty or representation whatsoever, express or implied, as to the suitability for any use, accuracy, reliability or completeness. Because the use of the data can vary and is beyond our control, the recipient shall assume full responsibility of his use and we decline any liability or warranty for damages and/or losses of whatever kind incurred by whomever in connection with or arising from the use, the result of use or inability to use the data of this publication.
Dr Vista S36 Vs. Conventional Fibre
Beam Test According To EN 14889-2
Corroshield C-99 is a liquid concrete admixture for protection of steel bar / rod in reinforced concrete construction (RCC) for an extended service life. Corroshield C-99 contains such organic chemicals to inhibit both cathodic and anodic corrosion when added in minimal dosage. In fact it retards the process of electrochemical corrosion of reinforcing bars during their entire service lives acting as negative catalyst and controlling process of metal corrosion very effectively. The concrete thus gets protected throughout its designed service life even in corrosive / highly aggressive environments.
Advantage: