Post Buy Requirement

Our Products

Rotary Vane Air Compressor

Our company offer high quality Rotary Vane Air Compressors (5.5 - 22 kW) which provide reliable, versatile and efficient solutions to our clients. Some features of the product are listed below :

  • Up to 100, 000+ operating hours for air-end life.
  • Delivers non-pulsating flow of quality air with less than 3 ppm.
  • High efficiency IE2 low speed motor.
  • Direct drive with minimal stresses as no roller bearings to replace.
  • Designed for high ambient & quiet operation, hence can be located at the point of use.
  • Energy saving VFD models & reduced energy venting system (REVS) for lower off-load power consumption
  • Easy and cost effective maintenance

The product comes with a 2 year standard warranty and we also offer 5 year extended warranty program.
Models of rotary vane air compressors offered by our company are: HV05 HV07 HV11 HV15 HV18.
Our company supplies many industrial equipment through our offices in Delhi.

Technical Specifications

Model HV05 HV07 HV11 HV15 HV18 HV22
Working Pressure 7 barg 10 barg 7 barg 10 barg 8 barg 10 barg 8 barg 10 barg 8 barg 10 barg 8 barg 10 barg
Free Air Delivery
(m³/min (CFM))
0.85 (30) 0.71 (25) 1.13 (40) 1.00 (35 1.52 (54) 1.32 (47 2.1 (73) 1.87 (66) 2.67 (95) 2.4 (84) 3.25 (115) 2.84 (100)
Noise Level 73 dBA 74 dBA
Receiver Size (Liters) 300 Tripod Mounted
Starter Type Star Delta
Motor Rating (kW) 5.5 7.5 11 15 18.5 22
Motor Speed (RPM) 1450
Motor Efficiency IE2

Data measured and stated in accordance with ISO1217 Annex C and Pneurop/Cagi PN2CPTC2 and at the following conditions:
Air Intake Pressure - 1 bar a/14.5psia
Air Intake Temperature - 20°C/68°F
Humidity - 0%(dry)
** Measured in free field conditions in accordance with the ISO 2151 and ISO 9614-2, tolerance ±3dB.
Product image is for illustration purpose only, actual product may vary. Gardner Denver policy is one of continuous improvement and we therefore reserve the right to
alter specifications and prices without prior notice. All products are sold subject to the Company’s conditions of sale.








View Complete Details

Reciprocating Compressor

Our company offers lubricated air cooled Reciprocating Compressors with power ranging from 5HP to 20 HP. Some of the characteristics of our reciprocating compressor are listed below :

  • Splash Lubricated
  • Two – Stage Design
  • 100% Cast Iron Compressor Pump
  • Alloy Steel Reed Valve
  • Oil Level Site Glass
  • Deep Finned Intercooler
  • Industrial Grade Intake Filter & Silencer

 

Our reciprocating compressors come with the following standard equipment, functions, and parts :

  • Automatic Start & Stop Operation
  • Horizontal Air Receiver
  • 415V/3 Phase/50 Hz Electric Motor
  • DOL Starter
  • Belt Guard
  • V-Belt Drive Arrangement
  • Safety Valve
  • Discharge & Drain Valve

Our company is based out Delhi, we are suppliers of a variety of industrial equipment.

Technical Specifications

Bare
Model
Moter
(hp)
Receiver
Size
(ltrs)
Compressor
(rpm)
Bore and
Stroke
(inch)
PD
(cfm)
Working Pressure (acfm)
125 psig 150 psig 175 psig
RV15 5 225 630 4-5/8" &
2-1/2" x 3"
18.4 15.6 15.5 15.3
7.5 225/300 910 26.5 23.7 23.4 23.2
RV30 10 300/500 640 4-5/8" & 37.3 30.2 30.1 30
12.5 300/500 740 4-5/8" & 43.2 35.3 35.1 35
15 300/500 910 2-1/2" & 53.1 44.4 43.9 43.5
20 300/500 1010 2-1/2" x 3" 58.9 49.5 49.3 49

acfm may vary within ±5% in accordance to IS 5456










View Complete Details

Panel AC

Reckon with us to fetch the Panel AC’s peerless collection at the delightful prices. We curate the Panel AC from those vendors who strictly follow the defined industrial standards while the designing process. Also, our vast stock accommodates the Panel AC in diversity of specifications in order to fulfill the variegated demands. Backed with the brilliant logistics network across India, we always assure the prompt delivery execution.

View Complete Details

Rotary Screw Compressor

Our company offers Rotary Screw Compressors with a fixed speed range of 15-22 kW. The different models offered are: L15 - L22.

 

Some characteristics of these rotary screw compressors are listed below:

  • Fully integrated air-end : The design of the high efficiency air-end operates at low rotational speeds, and as a result uses low amount of energy. This innovative integrated design, with oil separation, oil filter, thermostatic bypass valve, reduces the number of external hoses and components and hence results in increased reliability.
  • High efficiency drive : The L series range of our fixed speed compressors are fitted with a high efficiency IP55 IE2 motor to ensure operational reliability.
  • Small footprint : Designed to pass through a standard doorway ensures hassle-free installation.
  • Low noise levels : Reduced installation cost can be achieved by locating the compressor near to personnel or equipment without health and safety issues.
  • Delcos Pro Controller : The innovative controller provides dual position for simplicity of operation and cuts down the voltage requirement ensuring safe operation (24 V)
  • High quality air : This is achieved by the use of high efficiency air/oil separation system and optimum after cooling.
  • Up To 46 °C Ambient : This ensures continuous and stress-free operation through efficient heat dissipation.
  • High Quality Rotary Screw : Our range of oil-injected rotary screw compressors incorporate the very latest technology and manufacturing processes to provide users with a continuous supply of economic and reliable high quality compressed air.

Our company supplies a wide range of industrial equipment, out of our offices established in Delhi

Technical Specifications

L15-L22 Screw Compressor

Model Motor
Rating (kW)
Free Air Delivered m3/min1) Dimensions
(L x W x H) (mm)
Noise Level
db (A)2)
Weight (kg)
7.5 bar g 10 bar g 13 bar g
L15 15 2.70 2.26 1.80 787 x 698 x 1202 70 335
L18 18.5 3.25 2.74 2.34 787 x 698 x 1202 71 361
L22 22 3.65 3.21 2.61 787 x 698 x 1202 71 367

1) Data measured and stated in accordance with ISO 1217: 2009 Annex C and Pneurop / Cagi PN2CPTC2 and the following conditions:
Air Intake Pressure 1 bar a
Air Intake Temperature 20Ëš C
Humidity 0 % (dry).
2) Measured in free field conditions in accordance with ISO 2151 and ISO 9614-2, tolerance ± 3 dB(A).

CompAir policy is one of continuous improvement and we therefore reserve the right to alter specifications and prices without prior notice. All products are sold subject to the
Company’s conditions of sale.










Download Detail File : Click Here

Catalog 01


Download Detail File : Click Here

Catalog 02


Download Detail File : Click Here

Catalog 03


Download Detail File : Click Here
View Complete Details

Heatless Desiccant Air Dryer

We are the trustworthy Supplier of durable and high-performance Heatless Desiccant Air Dryer. As a dependable name, we procure our Heatless Desiccant Air Dryer only from the reliable manufacturers or vendors. It is thoroughly inspected against numerous quality parameters before making the final procurement. Moreover, we make available our Heatless Desiccant Air Dryer at the most affordable rates and in safe packaging.

View Complete Details

Refrigerated Air Dryer

We are the one-stop destination for availing the best in class Refrigerated Air Dryers in India. We share glorious credentials with the A-listed Refrigerated Air Dryer Suppliers from Delhi. Procured from the reliable names, our Refrigerated Air Dryers are immensely appreciated for the innovative design, robust quality, high-end performance, and long promising life. Avail these Refrigerated Air Dryers from us in varying stipulations at the market-leading prices.

View Complete Details

Compressed Air Receiver

Our company offers refrigerated type Compressed Air Receiver 20 - 1500 CFM. It comes with the following components :

  • Microprocessor controller
  • Anti-freezer
  • Anti-recycle controller
  • Advanced 3 in 1 integral heat exchanger
  • Large condenser for high ambient temperatures

Our refrigerated type Compressed Air Receiver uses pre-cooling methodology so that a smaller refrigeration unit can do the job (more economical). The heat exchanger used in this product has no extended surfaces or sharp corners that collect dust, dirt or oil residue, this is by design to ensure that all and any dust, dirt and oil is washed from the air.
Our company is based out of Delhi, we supply a wide range of products which include: industrial blowers, compressors, vacuum pumps etc.

Technical Specifications

Model Capacity
(SCFM)
Inlet Press
Kg/cm²
Max Working
Press Kg/cm²
Inlet Temp
deg C
Volt.
Supply
Power
Cons (kW)
Ref
Gas
Noise Level
(dBA)
Weight
(Kg)
End
Conn
GD20 20 7 16 45 230/50/1 0.32 R134a 69 38 3/4" BSP F
GD40 40 7 16 45 230/50/1 0.34 R134a 69 55 1" BSP F
GD50 50 7 16 45 230/50/1 0.34 R134a 69 55 1" BSP F
GD60 60 7 16 45 230/50/1 0.34 R134a 69 55 1" BSP F
GD80 80 7 16 45 230/50/1 0.85 R134a 69 70 1" BSP F
GD100 100 7 16 45 230/50/1 0.85 R134a 69 70 1" BSP F
GD150 150 7 16 45 230/50/1 1.02 R134a 69 110 1.5" BSP F
GD200 200 7 16 45 230/50/1 1.75 R407C 69 100 2" NB
GD250 250 7 16 45 230/50/1 1.75 R407C 69 100 1.5" BSP F
GD300 300 7 16 45 230/50/1 2.3 R407C 69 200 2" NB
GD400 400 7 16 45 415/50/3 2.3 R407C 69 260 2" NB
GD500 500 7 16 45 415/50/3 2.3 R407C 69 290 2" NB
GD650 650 7 16 45 415/50/3 3.34 R407C 69 350 2" NB
GD800 800 7 16 45 415/50/3 4.8 R407C 69 540 3" NB
GD1000 1000 7 16 45 415/50/3 4.8 R407C 69 580 3" NB
GD1250 1250 7 16 45 415/50/3 5.63 R407C 69 620 4" NB
GD1500 1500 7 12 45 415/50/3 7.15 R407C 69 900 4" NB

 

 

 

 











Dryer Sizing - Illustration

Requirement : Inlet flow 100 cfm
Working pressure 5 Kg / cm²
Inlet temperature 45° C
Ambient temperature 38° C
Referring tables : Factor Pi 0.84
Factor Ti 1
Factor Ta 1
Dryer capacity
required :
Flow
Pi x Ti x Ta
100
0.84 x 1 x 1
  119 cfm

 




Correction Factor

Inlet Air Temperature °C 30 38 45 50
Correction Factor (Ti) 1.14 1.08 1 0.75
Inlet Pressure Kg/cm² 2 5 9 12
Factor (Pi) 0.84 1 1.11 1.21
Ambient Temperature °C 25 30 38 43
Factor (Ta) 1.36 1.18 1 0.86

 

View Complete Details

Industrial Oil Chiller

Industrial Oil Chiller that we supply is extensively in demand amongst buyers owing to its excellent functionality. Sourced from trusted manufacturers or vendors, our Industrial Oil Chiller is accredited for its robust construction, flawless functionality and minimal maintenance. We offer our Industrial Oil Chiller in bulk and at the most competitive rates. We also ensure on-time delivery of the orders.

View Complete Details

Industrial Water Chiller

As a significant entity, we endeavor to supply the top of the line Industrial Water Chillers across the Indian markets at the incredibly low prices. We are backed with the strong vendors who are the specialists in fabricating the Industrial Water Chillers that are in line with the established industry standards. Besides that, we satiate the divergent demands of clients by offering these Industrial Water Chillers in different models and specifications.

View Complete Details

Air Line Filter

We are offering air line filter.
Aluminum molded filter housings for purification of compressed air. Removal of particles, oil, and flavour. All filters are proposed with pressure drop indicator, automatic drain and one element inside. Use in all type of industry in combination with air compressors and air dryers. For air flow from 25 to 2900 m3hr.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Sandeep (Vistech Pneumatic Services)
  • Plot No - 741/1, 1st Floor, 40 Foota Road, Near - Guga Park, Village - Mundka, Delhi - 110043, India
  • Share us via
  • Call 08068051377 Ext. 684
Browse Our Products list of Vistech Pneumatic Services Delhi, Delhi
Post Buy Requirement

Our Products #3268130

Rotary Vane Air Compressor

Our company offer high quality Rotary Vane Air Compressors (5.5 - 22 kW) which provide reliable, versatile and efficient solutions to our clients. Some features of the product are listed below :

  • Up to 100, 000+ operating hours for air-end life.
  • Delivers non-pulsating flow of quality air with less than 3 ppm.
  • High efficiency IE2 low speed motor.
  • Direct drive with minimal stresses as no roller bearings to replace.
  • Designed for high ambient & quiet operation, hence can be located at the point of use.
  • Energy saving VFD models & reduced energy venting system (REVS) for lower off-load power consumption
  • Easy and cost effective maintenance

The product comes with a 2 year standard warranty and we also offer 5 year extended warranty program.Models of rotary vane air compressors offered by our company are: HV05 HV07 HV11 HV15 HV18.Our company supplies many industrial equipment through our offices in Delhi.

Technical Specifications

Model HV05 HV07 HV11 HV15 HV18 HV22
Working Pressure 7 barg 10 barg 7 barg 10 barg 8 barg 10 barg 8 barg 10 barg 8 barg 10 barg 8 barg 10 barg
Free Air Delivery
(m³/min (CFM))
0.85 (30) 0.71 (25) 1.13 (40) 1.00 (35 1.52 (54) 1.32 (47 2.1 (73) 1.87 (66) 2.67 (95) 2.4 (84) 3.25 (115) 2.84 (100)
Noise Level 73 dBA 74 dBA
Receiver Size (Liters) 300 Tripod Mounted
Starter Type Star Delta
Motor Rating (kW) 5.5 7.5 11 15 18.5 22
Motor Speed (RPM) 1450
Motor Efficiency IE2

Data measured and stated in accordance with ISO1217 Annex C and Pneurop/Cagi PN2CPTC2 and at the following conditions:
Air Intake Pressure - 1 bar a/14.5psia
Air Intake Temperature - 20°C/68°F
Humidity - 0%(dry)
** Measured in free field conditions in accordance with the ISO 2151 and ISO 9614-2, tolerance ±3dB.
Product image is for illustration purpose only, actual product may vary. Gardner Denver policy is one of continuous improvement and we therefore reserve the right to
alter specifications and prices without prior notice. All products are sold subject to the Company’s conditions of sale.








View Complete Details

Reciprocating Compressor

Our company offers lubricated air cooled Reciprocating Compressors with power ranging from 5HP to 20 HP. Some of the characteristics of our reciprocating compressor are listed below :

  • Splash Lubricated
  • Two – Stage Design
  • 100% Cast Iron Compressor Pump
  • Alloy Steel Reed Valve
  • Oil Level Site Glass
  • Deep Finned Intercooler
  • Industrial Grade Intake Filter & Silencer

 

Our reciprocating compressors come with the following standard equipment, functions, and parts :

  • Automatic Start & Stop Operation
  • Horizontal Air Receiver
  • 415V/3 Phase/50 Hz Electric Motor
  • DOL Starter
  • Belt Guard
  • V-Belt Drive Arrangement
  • Safety Valve
  • Discharge & Drain Valve

Our company is based out Delhi, we are suppliers of a variety of industrial equipment.

Technical Specifications

Bare
Model
Moter
(hp)
Receiver
Size
(ltrs)
Compressor
(rpm)
Bore and
Stroke
(inch)
PD
(cfm)
Working Pressure (acfm)
125 psig 150 psig 175 psig
RV15 5 225 630 4-5/8" &
2-1/2" x 3"
18.4 15.6 15.5 15.3
7.5 225/300 910 26.5 23.7 23.4 23.2
RV30 10 300/500 640 4-5/8" & 37.3 30.2 30.1 30
12.5 300/500 740 4-5/8" & 43.2 35.3 35.1 35
15 300/500 910 2-1/2" & 53.1 44.4 43.9 43.5
20 300/500 1010 2-1/2" x 3" 58.9 49.5 49.3 49

acfm may vary within ±5% in accordance to IS 5456










View Complete Details

Panel AC

Reckon with us to fetch the Panel AC’s peerless collection at the delightful prices. We curate the Panel AC from those vendors who strictly follow the defined industrial standards while the designing process. Also, our vast stock accommodates the Panel AC in diversity of specifications in order to fulfill the variegated demands. Backed with the brilliant logistics network across India, we always assure the prompt delivery execution.

View Complete Details

Rotary Screw Compressor

Our company offers Rotary Screw Compressors with a fixed speed range of 15-22 kW. The different models offered are: L15 - L22.

 

Some characteristics of these rotary screw compressors are listed below:

  • Fully integrated air-end : The design of the high efficiency air-end operates at low rotational speeds, and as a result uses low amount of energy. This innovative integrated design, with oil separation, oil filter, thermostatic bypass valve, reduces the number of external hoses and components and hence results in increased reliability.
  • High efficiency drive : The L series range of our fixed speed compressors are fitted with a high efficiency IP55 IE2 motor to ensure operational reliability.
  • Small footprint : Designed to pass through a standard doorway ensures hassle-free installation.
  • Low noise levels : Reduced installation cost can be achieved by locating the compressor near to personnel or equipment without health and safety issues.
  • Delcos Pro Controller : The innovative controller provides dual position for simplicity of operation and cuts down the voltage requirement ensuring safe operation (24 V)
  • High quality air : This is achieved by the use of high efficiency air/oil separation system and optimum after cooling.
  • Up To 46 °C Ambient : This ensures continuous and stress-free operation through efficient heat dissipation.
  • High Quality Rotary Screw : Our range of oil-injected rotary screw compressors incorporate the very latest technology and manufacturing processes to provide users with a continuous supply of economic and reliable high quality compressed air.

Our company supplies a wide range of industrial equipment, out of our offices established in Delhi

Technical Specifications

L15-L22 Screw Compressor

Model Motor
Rating (kW)
Free Air Delivered m3/min1) Dimensions
(L x W x H) (mm)
Noise Level
db (A)2)
Weight (kg)
7.5 bar g 10 bar g 13 bar g
L15 15 2.70 2.26 1.80 787 x 698 x 1202 70 335
L18 18.5 3.25 2.74 2.34 787 x 698 x 1202 71 361
L22 22 3.65 3.21 2.61 787 x 698 x 1202 71 367

1) Data measured and stated in accordance with ISO 1217: 2009 Annex C and Pneurop / Cagi PN2CPTC2 and the following conditions:
Air Intake Pressure 1 bar a
Air Intake Temperature 20Ëš C
Humidity 0 % (dry).
2) Measured in free field conditions in accordance with ISO 2151 and ISO 9614-2, tolerance ± 3 dB(A).

CompAir policy is one of continuous improvement and we therefore reserve the right to alter specifications and prices without prior notice. All products are sold subject to the
Company’s conditions of sale.










Download Detail File : Click Here

Catalog 01


Download Detail File : Click Here

Catalog 02


Download Detail File : Click Here

Catalog 03


Download Detail File : Click Here
View Complete Details

Heatless Desiccant Air Dryer

We are the trustworthy Supplier of durable and high-performance Heatless Desiccant Air Dryer. As a dependable name, we procure our Heatless Desiccant Air Dryer only from the reliable manufacturers or vendors. It is thoroughly inspected against numerous quality parameters before making the final procurement. Moreover, we make available our Heatless Desiccant Air Dryer at the most affordable rates and in safe packaging.

View Complete Details

Refrigerated Air Dryer

We are the one-stop destination for availing the best in class Refrigerated Air Dryers in India. We share glorious credentials with the A-listed Refrigerated Air Dryer Suppliers from Delhi. Procured from the reliable names, our Refrigerated Air Dryers are immensely appreciated for the innovative design, robust quality, high-end performance, and long promising life. Avail these Refrigerated Air Dryers from us in varying stipulations at the market-leading prices.

View Complete Details

Compressed Air Receiver

Our company offers refrigerated type Compressed Air Receiver 20 - 1500 CFM. It comes with the following components :

  • Microprocessor controller
  • Anti-freezer
  • Anti-recycle controller
  • Advanced 3 in 1 integral heat exchanger
  • Large condenser for high ambient temperatures

Our refrigerated type Compressed Air Receiver uses pre-cooling methodology so that a smaller refrigeration unit can do the job (more economical). The heat exchanger used in this product has no extended surfaces or sharp corners that collect dust, dirt or oil residue, this is by design to ensure that all and any dust, dirt and oil is washed from the air.Our company is based out of Delhi, we supply a wide range of products which include: industrial blowers, compressors, vacuum pumps etc.

Technical Specifications

Model Capacity
(SCFM)
Inlet Press
Kg/cm²
Max Working
Press Kg/cm²
Inlet Temp
deg C
Volt.
Supply
Power
Cons (kW)
Ref
Gas
Noise Level
(dBA)
Weight
(Kg)
End
Conn
GD20 20 7 16 45 230/50/1 0.32 R134a 69 38 3/4" BSP F
GD40 40 7 16 45 230/50/1 0.34 R134a 69 55 1" BSP F
GD50 50 7 16 45 230/50/1 0.34 R134a 69 55 1" BSP F
GD60 60 7 16 45 230/50/1 0.34 R134a 69 55 1" BSP F
GD80 80 7 16 45 230/50/1 0.85 R134a 69 70 1" BSP F
GD100 100 7 16 45 230/50/1 0.85 R134a 69 70 1" BSP F
GD150 150 7 16 45 230/50/1 1.02 R134a 69 110 1.5" BSP F
GD200 200 7 16 45 230/50/1 1.75 R407C 69 100 2" NB
GD250 250 7 16 45 230/50/1 1.75 R407C 69 100 1.5" BSP F
GD300 300 7 16 45 230/50/1 2.3 R407C 69 200 2" NB
GD400 400 7 16 45 415/50/3 2.3 R407C 69 260 2" NB
GD500 500 7 16 45 415/50/3 2.3 R407C 69 290 2" NB
GD650 650 7 16 45 415/50/3 3.34 R407C 69 350 2" NB
GD800 800 7 16 45 415/50/3 4.8 R407C 69 540 3" NB
GD1000 1000 7 16 45 415/50/3 4.8 R407C 69 580 3" NB
GD1250 1250 7 16 45 415/50/3 5.63 R407C 69 620 4" NB
GD1500 1500 7 12 45 415/50/3 7.15 R407C 69 900 4" NB

 

 

 

 











Dryer Sizing - Illustration

Requirement : Inlet flow 100 cfm
Working pressure 5 Kg / cm²
Inlet temperature 45° C
Ambient temperature 38° C
Referring tables : Factor Pi 0.84
Factor Ti 1
Factor Ta 1
Dryer capacity
required :
Flow
Pi x Ti x Ta
100
0.84 x 1 x 1
  119 cfm

 




Correction Factor

Inlet Air Temperature °C 30 38 45 50
Correction Factor (Ti) 1.14 1.08 1 0.75
Inlet Pressure Kg/cm² 2 5 9 12
Factor (Pi) 0.84 1 1.11 1.21
Ambient Temperature °C 25 30 38 43
Factor (Ta) 1.36 1.18 1 0.86

 

View Complete Details

Industrial Oil Chiller

Industrial Oil Chiller that we supply is extensively in demand amongst buyers owing to its excellent functionality. Sourced from trusted manufacturers or vendors, our Industrial Oil Chiller is accredited for its robust construction, flawless functionality and minimal maintenance. We offer our Industrial Oil Chiller in bulk and at the most competitive rates. We also ensure on-time delivery of the orders.

View Complete Details

Industrial Water Chiller

As a significant entity, we endeavor to supply the top of the line Industrial Water Chillers across the Indian markets at the incredibly low prices. We are backed with the strong vendors who are the specialists in fabricating the Industrial Water Chillers that are in line with the established industry standards. Besides that, we satiate the divergent demands of clients by offering these Industrial Water Chillers in different models and specifications.

View Complete Details

Air Line Filter

We are offering air line filter.Aluminum molded filter housings for purification of compressed air. Removal of particles, oil, and flavour. All filters are proposed with pressure drop indicator, automatic drain and one element inside. Use in all type of industry in combination with air compressors and air dryers. For air flow from 25 to 2900 m3hr.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us