Delhi, India
Our Products
Standard Sizes And Accuracy Of Luthra Engineer Steel Straight Edges As Per IS:2220-1990, Grade-1
| Dimensions L X B X H mm |
Straightness Microns um |
Parallelism Microns um |
| 300 x 35 x 8 | 12 | 24 |
| 450 x 35 x 8 | 12 | 24 |
| 600 x 50 x 8 | 15 | 30 |
| 1000x 50 x 8 | 21 | 42 |
| 1200 x 55 x 10 | 25 | 50 |
| 1500 x 65 x 12 | 29 | 58 |
| 2000 x 65 x 12 | 37 | 74 |
| 2500 x 65 x 12 | 46 | 92 |
| 3000 x 85 x 18 | 54 | 108 |
| 4000 x 100 x 20 | 71 | 142 |
| 5000 x 100 x 20 | 87 | 174 |
| 6000 x 120 x 20 | 100 | 200 |
Standard Sizes And Accuracy Of Granite Straight Edge As Per Grade-1
| Sizes L x B x H mm |
Accuracy in Microns um |
|
| Straightness | Parallelism | |
| 1000x 150 x 75 | 10 | 10 |
| 1500 x 200 x 75 | 15 | 15 |
| 2000 x 200 x 75 | 20 | 20 |
Standard Size And Accuracy Of Luthra Cast Iron Lapping Plates As Per IS : 2285:2003, Grade 1
| ound / Square mm |
Accuracy um |
Sizes mm |
Accuracy um |
| 100 | 5 | 300 x 450 | 9 |
| 200 | 5 | 450 x 600 | 10 |
| 250 | 7 | 600 x 900 | 12 |
| 300 | 7.5 | 1000 x 1000 | 14 |
| 400 | 9 | ||
| 450 | 9 |
| Size | Grinding Wheel | Motor | Spindle Speed RPM | Hou sing Dia MM |
Int. Spindle Arbour Length |
Spindle Pully Dia. | Motor Pully Dia. | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External | Internal | HP | RPM | Ext. | Int. | Ext. | Int. | Ext. | Int. | |||
| 4" | 4" x 1?2 x 1?2 (3?4") | 3?4" x 1" x 1?4" | 1?4 Frame Size: 63 | 2800 | 6000 | 18000 | 44.0 | 21?2" | 1" | 1" | 21?2" | 6 1?2" |
| 6" | 6" x 3?4 x 5?8" (11?4") | 11?2" x 5?8" x 1?4" | 1?2 | 2800 | 3500 | 16800 | 49.0 | 31?2" (Max 51?2") | 2" | 11?4" | 21?2" | 7 5?8" |
| 8" | 8" x 3?4 x 3?4" (11?4") | 11?2" x 5?8" x 1?4" | 1 | 2800 | 2800 | 9700 | 59.5 | 4" (Max 6") | 21?2" | 17?8" | 21?2" | 6 1?2" |
| 10" Light Duty | 10" x 1" x 3?4" (11?4") | 11?2" x 5?8" x 1?4" | 1 | 2800 | 2800 | 9700 | 59.5 | 4" (Max 6") | 21?2" | 17?8" | 21?2" | 6 1?2" |
| MODEL NO. | SHANK TAPER | SUITABLE FOR COLLET | L mm | L1 mm | ØD mm | M |
|---|---|---|---|---|---|---|
| ISO - 30 E - 32 | ISO - 30 | E- 32 | 68.4 | 68 | 50 | M12 |
| ISO - 30 E - 40 | ISO - 30 | E- 40 | 68.4 | 90 | 63 | M12 |
| ISO - 40 E - 32 | ISO - 40 | E- 32 | 93.4 | 40 | 50 | M16 |
| ISO - 40 E - 40 | ISO - 40 | E- 40 | 93.4 | 55 | 63 | M16 |
| ISO - 40 E - 45 | ISO - 40 | E- 45 | 93.4 | 65 | 68 | M16 |
| ISO - 50 E - 40 | ISO - 50 | E- 40 | 126.8 | 55 | 63 | M24 |
| ISO - 50 E - 45 | ISO - 50 | E- 45 | 126.8 | 60 | 68 | M24 |
MORSE TAPER SPECIFICATIONS
| M.T. No. | ØD mm | L mm | L1 mm | SHORT HAND TAP HOLDING RANGE |
|---|---|---|---|---|
| 1 | 12.065 | 65.5 | 3.5 | M3 to M8 |
| 2 | 17.780 | 80.0 | 5.0 | M6 to M16 |
| 3 | 23.825 | 99.0 | 5.0 | M12 to M24 |
| 4 | 31.267 | 124.0 | 6.5 | M16 to M24 |
| 5 | 44.399 | 156.0 | 6.5 | M24 to M42 |
| Model No. | Outer M.T. | Inner M.T. | Ø D mm | Ø D1 mm | L mm | L1 mm | Weight Kg. |
|---|---|---|---|---|---|---|---|
| MT 1-1 | 1 | 1 | 20 | 12.065 | 62.0 | 83.0 | 0.225 |
| MT 1-2 | 1 | 2 | 30 | 12.065 | 62.0 | 98.0 | 0.460 |
| MT 2-1 | 2 | 1 | 20 | 17.780 | 75.0 | 85.0 | 0.310 |
| MT 2-2 | 2 | 2 | 30 | 17.780 | 75.0 | 100.0 | 0.535 |
| MT 2-3 | 2 | 3 | 36 | 17.780 | 75.0 | 121.0 | 0.800 |
| MT 3-1 | 3 | 1 | 20 | 23.825 | 94.0 | 79.0 | 0.475 |
| MT 3-2 | 3 | 2 | 30 | 23.825 | 94.0 | 100.0 | 0.740 |
| MT 3-3 | 3 | 3 | 36 | 23.825 | 94.0 | 121.0 | 0.985 |
| MT 3-4 | 3 | 4 | 48 | 23.825 | 94.0 | 146.0 | 1.690 |
| MT 4-1 | 4 | 1 | 20 | 31.267 | 117.5 | 82.5 | 0.805 |
| MT 4-2 | 4 | 2 | 30 | 31.267 | 117.5 | 97.5 | 1.060 |
| MT 4-3 | 4 | 3 | 36 | 31.267 | 117.5 | 122.5 | 1.315 |
| MT 4-4 | 4 | 4 | 48 | 31.267 | 117.5 | 147.5 | 2.095 |
| MT 4-5 | 4 | 5 | 63 | 31.267 | 117.5 | 182.5 | 3.500 |
| MT 5-1 | 5 | 1 | 20 | 44.399 | 149.5 | 82.5 | 1.800 |
| MT 5-2 | 5 | 2 | 30 | 44.399 | 149.5 | 97.5 | 1.990 |
| MT 5-3 | 5 | 3 | 36 | 44.399 | 149.5 | 118.5 | 2.275 |
| MT 5-4 | 5 | 4 | 48 | 44.399 | 149.5 | 150.5 | 3.300 |
| MT 5-5 | 5 | 5 | 63 | 44.399 | 149.5 | 185.5 | 4.800 |
| MT 5-6 | 5 | 6 | 83 | 44.399 | 149.5 | 247.5 | 8.100 |
| MT 6-2 | 6 | 2 | 30 | 63.348 | 210.0 | 99.0 | 5.200 |
| MT 6-3 | 6 | 3 | 36 | 63.348 | 210.0 | 120.0 | - |
| MT 6-4 | 6 | 4 | 48 | 63.348 | 210.0 | 145.0 | 6.300 |
| MT 6-5 | 6 | 5 | 61 | 63.348 | 210.0 | 180.0 | 7.500 |
| MT 6-6 | 6 | 6 | 83 | 63.348 | 210.0 | 242.0 | 10.500 |
| MT 6-7 | 6 | 7 | 105 | 63.348 | 210.0 | 328.0 | - |
Standard Size And Accuracy Of Luthra Master Cylinder As Per IS 6952:1990. Grade 1
| Length mm |
Diameter mm |
Accuracy um |
| 75 | 50 | 3 |
| 150 | 70 | 3 |
| 225 | 90 | 5 |
| 300 | 95 | 5 |
| 450 | 120 | 7 |
| 600 | 140 | 9 |
Additional Information:
Payment Terms : T/T
depth stop for calipers
we have complete range of measuring tools.
.
Additional Information:
Packaging Details : Box or Cartoon
Delivery Time : 2 Weeks
spherical anvil tube mirometers
- we have complete range of measuring tools.
.
SCRIBERS FOR HEIGHT GAGES
WE HAVE COMPELTE RANGE OF MEASURING TOOLS.
