We have technological tie up with MPTeq for conventional flotation and MaxFlot for Dual extraction Column. One of the leading suppliers in the world in their unique design and features. We have two types of flotation cell Conventional and Dual Extraction Column to sort out power consumption problem and to achieve high yield and recovery in the existing comitative market. MPTeq have track record of successful.

• Unique in its design features.
• Combination of both sparger and agitator system.
• High yield due to two zone separation
• Very less bubble and particle short circuit
• Less maintenance by minimum spares
• Easy to operate and maintenance
• Very fine bubbles compare to any other conventional cells
• Optimal air control
• Individual variable speed

Self induce optimal air will give full control on process parameters Cell design ensures each particle come to contact with air bubble Flotation system does not have air induced system.

Side-entering mixers work efficiently where a tank is too large for convenient installation of a top.

• Head room constraints prevent the use of top entry units.
• Mixing is required only in the bottom portion of a deep tank.
• Large diameter storage tanks.
• Low viscosity blending is required.
• Low capital equipment cost is a govering criteria.

Vmix have technological collaboration with MPTeq/Metanza for the thickeners. thickener have robust inbuilt technology reliable proven design and superior quality give us the edge. We has built it strength on a complete understanding of your process requirements. We can supply thickeners range from diameters of 1 meter to 100 meter.

• Innovative feed dilution and supernatant cleaning device.
• A superior and distinctive lifting device, i.e, capable of lifting fully loaded rakes.
• It simplifies the raising and lowering of rakes.
• Inhouse testing and designing ensures cost effective and high efficiency.

We design , manufacture and supply Flocculent dosing system for ultra big requirement as well as very small dosing requirement. These system are highly customized and available in plug and play type.

Flocculent plant shall be manufactured as per the VMix standard design. VMix process has proven records of supplying large nos. of flocculants plant. These are custom designed and also available in plug and play type. The capacity can be designed up to 4 ton of dry flocculant per day All units are taken through a full test programme prior to delivery. It offers a simple solution-install it, run it and it will work for you

Manual, Semi-Automatic and Automatic Filter press are in range of supply of VMix. This are highly efficient and operational friendly machine designed by VMix. FP is available in all sizes and for all relevant application.

• Customized design and selection.
• In house testing, selection and manufacturing facilities.
• Easy plate removal and washing system.
• Consistency in moisture.
• No blockage of plates and cloths.
• Capable of filter too slimes.
• Easy cloth removal and washing system.
• Customized cake breaking and washing system.
• Flwxible and friendly operation.

World leading range of proven Atrition Srubber, which are suitable for scrubbing and dissolving hard to dissolve minerals and chemicals as well as for removing inactive surface layers from Mineral. Have prove installations operating in Iron ore, Beach sand minerals, non metallic glass and food.

• Surface cleaning of particles.
• Liberation of mineral from slime coatings.
• Disintegration of clay.
• Sand particle polishing.
• High-intensity conditioning.
• Liberation of valuable minerals from clay.
• Washing plastic chips for recycling.
• Reaction vessels.
• Soil washing-liberation of contaminants.
• Delamination or blunging of clays.

• Size range varies from 1 to 300 tph feed solids.
• Capable to handle High specific gravity material.
• Upto -10 mm materials can be treated.
• Proven instalations Worldwide.
• Low power consumption.
• Low installation footage.
• Customized design.
• Anti choking.
• High Effective washing system.
• Variable speed control.

The MPTeq-Metanza Jigs are new generation designs for a mature, jigging technology. The leading-edge design supports a more effective recovery process and, ultimately, produces a superior concentrate while consistently delivering on lower capital and operational costs with minimum environmental impact.

In this department we design an entire plant depending on application. Custom made units meet our clients requirements and use the same technology as our flocculent plants, which are widely used in the market today.

• Turnkey make-up and reagent dosing plants.
• Designed to offer accurate dosing concentrations.
• Controlled and correct measured rate.
• Semi Auto and fully fledged Automated Systems.
• Easy to operate and low maintainance.
• More than 30 installation worldwide
• Customized supply for all application

Linear screen widely used for thrash removal before feeding to the main process.

• VMix is having customised design to treat various capacity.
• Our equipment capable of screening too slime material.
• 2000 microns
• Low water and power consumption.
• Low construction material.
• Less footage space requirement.
• Low maintenance and simple structure.
• Application- Wet Processing, Slurry preparation.

VMix specializes in manufacturing custom turnkey modular plants for various mineral processing applications. VMix and MPTeq process metallurgists and engineers collaborate closely with the client to provide application specific solutions to meet the clients's requirements. Our knowledge and experience can provide assistance from the beginning of the project tp the end; process design, mechanical design, dry commissioning, wet commissioning, spare parts, operator and maintenance training.

• Crushing and Grinding
• Washing and Clasiffication.
• Benficiation Plant.
• Jigging Plant.
• Flotation plant.
• Dewatering Plant.
• Reagent Systems.
• Leaching Systems.
• Solvent Extraction Plant.

• M sand Washing Plants.
• Coal Washeries
• Silica Sand Washing Plants
• Iron Ore washaries
• Bellow Baby Jigs
• Skid Mounting Tailing Recovery Plant
• Beasand Wasjing Plant
• Heavy Media Separation Plants
• Heavy Media Separation Plants
• Dens Media Plants
• Tailing Recovery Plants

Screw Spiral Classifiers used for fines classification, lumps separation and surfacing washing of fines materials. It can be used as separation Breaking down clay lumps and removing clay from agglomerated rock and stone, makes it ideal for diamond aggregate. It has proven to be far more effective than rotary scrubbers.

• Wide choice of tank design and Overflow collection box.
• Sealed, submerged bearing.
• Adjustable weirs.
• Optional automatic lubrication system.
• Rigid tank and substructure.
• Customized Single spiral dial.

• Sluryy Mixing, Conditioning.
• Solids suspension and holding tanks.
• Leaching and Reaction tanks.
• Blending, precipitation, dissolution, digestion, crystallization, effluent treatment etc.

• Customized design.
• Range varies from 0.12 kW to 350 kW
• Large diameter storage tanks.
• Low viscosity blending in required.
• Low Maintanance cost with minimum spares.
• Low capital equipment cost ia a governing criteria

MaxFlot have track record of successful flotation plants operating in India, Africa, Australia and in UK. In India DEC successfully working in Iron ore tailing recovery, Coal, Silemenite and Barite Minerals with that in abroad it is working for copper, Phosphat and coal minerals

• Dual stage two cells can work as Rougher and scavenger or Rougher and cleaner.
• Unique design features enable to get high yield and grade.
• Very low in: Power and water consumption.
• Handles slurry with fine to 1.5 mm particles.
• 40% less than installation footage, 45% low maintenance with less spares.
• Pheripheral froth flow increase the yield and froth gives better grade.
• Spontaneous restart post power failure.
• Have Proven installations in india and abroad.
• Successfully recovering Iron ore values from tailing ponds Fines.