SIZES

• SMLS - 1/8 to 24 (NPS)
• ERW/HFW- to 24 (NPS)
• SAW 18 to 48 (NPS)

SCHEDULE

5S to XXS (Odd Thickness will be available on request).

MATERIALS

Carbon Steel, Stainless Steel, Duplex & Super Duplex, Alloy steel

VALUE ADDED SERVICES

• Galvanizing
• Fusion bonded Epoxy Coating
• 3 layers PE Coating
• 3 layers PP Coating
• Lacquer Finish

TYPE

• Long Radius 90 & 45 Elbows
• Short Radius 90 & 45 Elbows
• Long Radius 180 Returns
• Short Radius 180 Returns
• Straight Tees
• Reducing Tees
• Lateral Tees
• Barred Tees
• Concentric Reducers
• Eccentric Reducers
• Crosses
• Caps
• Stub Ends

TYPE

• Long Radius 90 & 45 Elbows
• Short Radius 90 & 45 Elbows
• Equal Tees
• Reducing Tees
• Lateral
• Crosses
• Reducers
• Street Elbow
• Coupling
• Caps
• Inserts
• Bushing
• Union

TYPE

• Weldolet
• Sockolet
• Threadolet
• Elbolet
• Nippolet
• Laterolet
• Sweepolet

TYPES

• Weld Neck
• SlipOn
• Socket Weld
• Blind
• Threaded
• Lap Joint
• Long Weld Neck

Types

• ORIFICE FLANGE
• ANCHOR FLANGE
• SWIVEL RING FLANGE
• WIND TOWER FLANGES
• PADDLE SPACER, BLINDS & SPECTACLE BLINDS (ACCORDING TO ASME B16.48)

TYPES

• Ball Valve
• Gate Valve
• Globe Valve
• Check Valve
• Plug Valve
• Butterfly Valve
• Pressure relief valve

SIZES

• Forged Valves TO 4
• Casting Valves- to 48

TYPES

• Coils
• Plates
• UB
• UC
• IPE
• I-Beam
• H-Beams
• Channels
• Angles
• Hollow sections.

TYPES

• Spiral Wound Gaskets
• Corrugated Gasket
• Ring Joint Gasket
• Metal Jacketed
• Cam profile Gasket

TYPES

• Stud Bolts
• Anchor Bolts
• Turbine Bolting
• High Tensile Threaded Rods
• Hex Head Bolt
• Cap Screws
• Nuts
• Washers

GRADES

• A193- B5, B6, B7, B8, B8C, B8M, B8T, B16, B7M
• A194-2H, 2HM, 3, 4, 6, 7, 8, 7M, 8C, 8M, 8T
• A320 -L7, L9, L10, B8, B8C, B8M, B8T, L7M

SIZES

• WIDTH: 2000 3000 (MM)
• LENGTH: 6000 12000 (MM)
• THICKNESS: 6 150 (MM)

STEEL GRADE

A515/SA515 - 60/65/70 (NORMALIZED, IMPACT TESTED AT - 46C WITH UT TESTING AS PER 578 SPECIFICATIONS HIC TESTED)

A516/SA516 - 60/65/70 (NORMALIZED, IMPACT TESTED AT - 46C WITH UT TESTING AS PER 578 SPECIFICATIONS HIC TESTED)

A, B, D, E, AH32, DH32, EH32, AH36, DH36, EH36

TYPES

• WIND TOWER
• FLANGES BEARING & GEAR BLANKS
• SLEWING BEARING FORGINGS

BUSHES

• Load Range: 0.5kN to 600kN
• Size: OD 10 400 mm

SANDWICH MOUNTS

• Load Range: 0.1kN to 450kN
• Rectangle or Square: 10 x 10 x 10 to 300 x 300 x 300 mm
• Bobbin Size: OD 10 150 mm

BUMP STOPS

• Load Range: 0.5kN to 50kN
• Size: 10 t 250 mm

GENERATOR MOUNTS

• Power: 0.5 kN 200 kN
• Size: as per Customer Requirements

SPECIAL VIBRATION ISOLATOR

• Power: Ball Joints & Tunion Bushes for High Axial & Torsional Load

INDUSTRY

Wind Energy, Defense, Industrial, Electronics, Marine, Process, Railways, Specialized Vehicles & Automotive

TYPES

• Y Strainer
• T Strainer
• Basket Strainers
• Duplex Strainers
• Fabricated Strainers

END CONNECTION

• Threaded
• Flanged
• Socket weld
• Butt weld

TYPES

• FULLGRATING BEARING BAR (2MM TO 5MM)
• HEAVY DUTY GRATING - BEARING BAR (8MM TO 12MM)
• LOUVRE GRATING BEARING BAR (2MM & 3MM)
• FULL PRESS LOCKED LOUVRE GRATING BEARING BAR (2MM & 3MM)
• PATENT GRATING - BEARING BAR (2MM)
• ULTRA GRATING - BEARING BAR (2MM & 3MM)

TYPES

• PERFORATED
• LADDER

TRAY TYPE

• PT PLAIN TYPE FLANGE
• IR INSIDE RETURNED FLANGE
• OR OUTWARD RETURNED FLANGE
• CP C-PROFILE FLANGE

SIZE RANGE

• SIDE HEIGHT: 25 MM TO 100 MM
• WIDTH: 50 MM (2) TO 900 MM (36)
• MATERIAL THICKNESS: 1 MM TO 2 MM
• LENGTH: 2440 MM / 3000 MM

MATERIAL FINISH

• HOT DIP GALVANISATION
• EPOXY PAINTED
• STAINLESS STEEL

ACCESSORIES

• FLAT 90DEG BEND
• FLAT 45DEG BEND
• OUTSIDE RISER
• INSIDE RISER
• FLAT EQUAL TEE
• FLAT 4 WAY EQUAL INTERSECTION
• REDUCER
• STRAIGHT COUPLER
• CRANKED COUPLER
• FISH PLATE
• EARTH LINK

SIZES

• SMLS - 1/8 to 24 (NPS)
• ERW/HFW- to 24 (NPS)
• SAW 18 to 48 (NPS)

SCHEDULE

5S to XXS (Odd Thickness will be available on request).

MATERIALS

Carbon Steel, Stainless Steel, Duplex & Super Duplex, Alloy steel

VALUE ADDED SERVICES

• Galvanizing
• Fusion bonded Epoxy Coating
• 3 layers PE Coating
• 3 layers PP Coating
• Lacquer Finish

TYPE

• Long Radius 90 & 45 Elbows
• Short Radius 90 & 45 Elbows
• Long Radius 180 Returns
• Short Radius 180 Returns
• Straight Tees
• Reducing Tees
• Lateral Tees
• Barred Tees
• Concentric Reducers
• Eccentric Reducers
• Crosses
• Caps
• Stub Ends

TYPE

• Long Radius 90 & 45 Elbows
• Short Radius 90 & 45 Elbows
• Equal Tees
• Reducing Tees
• Lateral
• Crosses
• Reducers
• Street Elbow
• Coupling
• Caps
• Inserts
• Bushing
• Union

TYPE

• Weldolet
• Sockolet
• Threadolet
• Elbolet
• Nippolet
• Laterolet
• Sweepolet

TYPES

• Weld Neck
• SlipOn
• Socket Weld
• Blind
• Threaded
• Lap Joint
• Long Weld Neck

Types

• ORIFICE FLANGE
• ANCHOR FLANGE
• SWIVEL RING FLANGE
• WIND TOWER FLANGES
• PADDLE SPACER, BLINDS & SPECTACLE BLINDS (ACCORDING TO ASME B16.48)

TYPES

• Ball Valve
• Gate Valve
• Globe Valve
• Check Valve
• Plug Valve
• Butterfly Valve
• Pressure relief valve

SIZES

• Forged Valves TO 4
• Casting Valves- to 48

TYPES

• Coils
• Plates
• UB
• UC
• IPE
• I-Beam
• H-Beams
• Channels
• Angles
• Hollow sections.

TYPES

• Spiral Wound Gaskets
• Corrugated Gasket
• Ring Joint Gasket
• Metal Jacketed
• Cam profile Gasket

TYPES

• Stud Bolts
• Anchor Bolts
• Turbine Bolting
• High Tensile Threaded Rods
• Hex Head Bolt
• Cap Screws
• Nuts
• Washers

GRADES

• A193- B5, B6, B7, B8, B8C, B8M, B8T, B16, B7M
• A194-2H, 2HM, 3, 4, 6, 7, 8, 7M, 8C, 8M, 8T
• A320 -L7, L9, L10, B8, B8C, B8M, B8T, L7M

SIZES

• WIDTH: 2000 3000 (MM)
• LENGTH: 6000 12000 (MM)
• THICKNESS: 6 150 (MM)

STEEL GRADE

A515/SA515 - 60/65/70 (NORMALIZED, IMPACT TESTED AT - 46C WITH UT TESTING AS PER 578 SPECIFICATIONS HIC TESTED)

A516/SA516 - 60/65/70 (NORMALIZED, IMPACT TESTED AT - 46C WITH UT TESTING AS PER 578 SPECIFICATIONS HIC TESTED)

A, B, D, E, AH32, DH32, EH32, AH36, DH36, EH36

TYPES

• WIND TOWER
• FLANGES BEARING & GEAR BLANKS
• SLEWING BEARING FORGINGS

BUSHES

• Load Range: 0.5kN to 600kN
• Size: OD 10 400 mm

SANDWICH MOUNTS

• Load Range: 0.1kN to 450kN
• Rectangle or Square: 10 x 10 x 10 to 300 x 300 x 300 mm
• Bobbin Size: OD 10 150 mm

BUMP STOPS

• Load Range: 0.5kN to 50kN
• Size: 10 t 250 mm

GENERATOR MOUNTS

• Power: 0.5 kN 200 kN
• Size: as per Customer Requirements

SPECIAL VIBRATION ISOLATOR

• Power: Ball Joints & Tunion Bushes for High Axial & Torsional Load

INDUSTRY

Wind Energy, Defense, Industrial, Electronics, Marine, Process, Railways, Specialized Vehicles & Automotive

TYPES

• Y Strainer
• T Strainer
• Basket Strainers
• Duplex Strainers
• Fabricated Strainers

END CONNECTION

• Threaded
• Flanged
• Socket weld
• Butt weld

TYPES

• FULLGRATING BEARING BAR (2MM TO 5MM)
• HEAVY DUTY GRATING - BEARING BAR (8MM TO 12MM)
• LOUVRE GRATING BEARING BAR (2MM & 3MM)
• FULL PRESS LOCKED LOUVRE GRATING BEARING BAR (2MM & 3MM)
• PATENT GRATING - BEARING BAR (2MM)
• ULTRA GRATING - BEARING BAR (2MM & 3MM)

TYPES

• PERFORATED
• LADDER

TRAY TYPE

• PT PLAIN TYPE FLANGE
• IR INSIDE RETURNED FLANGE
• OR OUTWARD RETURNED FLANGE
• CP C-PROFILE FLANGE

SIZE RANGE

• SIDE HEIGHT: 25 MM TO 100 MM
• WIDTH: 50 MM (2) TO 900 MM (36)
• MATERIAL THICKNESS: 1 MM TO 2 MM
• LENGTH: 2440 MM / 3000 MM

MATERIAL FINISH

• HOT DIP GALVANISATION
• EPOXY PAINTED
• STAINLESS STEEL

ACCESSORIES

• FLAT 90DEG BEND
• FLAT 45DEG BEND
• OUTSIDE RISER
• INSIDE RISER
• FLAT EQUAL TEE
• FLAT 4 WAY EQUAL INTERSECTION
• REDUCER
• STRAIGHT COUPLER
• CRANKED COUPLER
• FISH PLATE
• EARTH LINK