• MOQ 10 Metric Ton

Base Oil is the name given to lubrication grade oils initially produced from refining crude oil (mineral base oil) or through chemical synthesis (synthetic base oil). Base oil is typically defined as oil with a boiling point range between 550 and 1050 F, consisting of hydrocarbons with 18 to 40 carbon atoms. This oil can be either paraffinic or naphthenic in nature depending on the chemical structure of the molecules. The quality of base oils is determined by their olefinic, nitrogenated and sulfured compound contents. This is determined by the refining process which it undergoes in its cleaning and removing of impurities. In order to meet composition specifications, these oils are submitted to the hydro-treatment (HDT) process before addition of other compounds for commercial production. This process is characterized by the use of operational conditions of low or medium severity so that aromatic distribution is not seriously affected and sulfur compounds are not completely removed. Base oils are generally fully saturated and extremely pure, with very low volatility and high viscosity index. The proportions of different hydrocarbon components determine the characteristics of the base oils. Viscosity is a measure of the base oil’s ability to not thicken at low temperatures and not thin out at high temperatures. Base oils may be refined, re-refined, recycled, or reusable. Base oils are produced using an advanced hydro cracking and hydro isomerization process.

Pyrolysis oil is a synthetic fuel under investigation as substitute for petroleum. It is extracted by biomass to liquid technology of destructive distillation from driedbiomass in a reactor at temperature of about 500°C with subsequent cooling. Pyrolytic oil (or bio-oil) is a kind of tar and normally contains too high levels of oxygen to be a hydrocarbon. As such it is distinctly different from similar petroleum products. We are currently offering the RO (Rubber/ Tyre Oil) which is obtained from the burning of Rubber Tyre.

• Density @ 25 º C, gm/ml0.814-0.830
• Kinematic Viscosity @ 40 º C (cst)11-14
• Flash Point (COC) (Min)150
• Pour Point º C (Max)-15

• MOQ 10 Metric Ton
• Density at 15OC (typical 10000)
• Flash point (PMCC) OC. Min 66
• Kinematic viscosity, cSt at 50OC 125-180
• Inorganic acidityNil
• Ash, % wt. Max0.1
• Water content, % v/v, Max 1.0

Used oil is defined as any oil refined from crude oil that has been used and as a result is contaminated by physical or chemical impurities. This can include lubricants, hydraulic fluids, brake fluids, greases, electrical insulation oil, machine cutting oil, mineral spirits, petroleum napthas and stoddard solvents that are not hazardous waste other than because of their ignitability.

As a part of diversification, we are indulging our self in the hair n care products. We provide premium quality hair shampoo with proven quality. Our hair products are proven to be anti-dandruff, prevent hair-loss and revitalizes hair roots.

Pyrolysis oil is a synthetic fuel under investigation as substitute for petroleum. It is extracted by biomass to liquid technology of destructive distillation from driedbiomass in a reactor at temperature of about 500°C with subsequent cooling. Pyrolytic oil (or bio-oil) is a kind of tar and normally contains too high levels of oxygen to be a hydrocarbon. As such it is distinctly different from similar petroleum products. We are currently offering the RO (Rubber/ Tyre Oil) which is obtained from the burning of Rubber Tyre.

• Density0.80
• ColorWhite, Transparent
• Viscosity 2 Max

• MOQ 10 Metric Ton
• Brand NameLDO_VS
• ApplicationFiring/Burning Purpose
• ColorDark Black
• Density@29.5Cgm/cc0.850-0.880
• Flash point ( degree centigrade)50-60
• Kinematic Viscosity , cSt5.00-11.50
• Calorific value Kcal/kg10650-10750

• MOQ 10 Metric Ton
• Density at 15OC (typical 10000)
• Flash point (PMCC) OC. Min 66
• Kinematic viscosity, cSt at 50OC 125-180
• Inorganic acidityNil
• Ash, % wt. Max0.1
• Water content, % v/v, Max 1.0

Conning oil is a highly refined product compound with non-ionic surfactants and possesses valuable properties of stability in hard and soft water. It shows excellent compatibility with other surfactants like dyes, finishing agents and other processing additives. It is non-toxic and easily removed from fiber by scouring process and will not interfere with dying and finishing process. Advantages ·Good antistatic property ·Non ionic ·Non-corrosive with low volatility, ·Good emulsion stability ·Sufficient lubricity between fiber to fiber no yellowing of fiber after scouring operation ·easily removed during scouring operation. Applications .It is an applied to filament after texturing and during cone winding operation.

Used oil is defined as any oil refined from crude oil that has been used and as a result is contaminated by physical or chemical impurities. This can include lubricants, hydraulic fluids, brake fluids, greases, electrical insulation oil, machine cutting oil, mineral spirits, petroleum napthas and stoddard solvents that are not hazardous waste other than because of their ignitability.