VT CORP Pvt Ltd

Andheri East, Mumbai, Maharashtra

Operation of the Machine

• The Machine to be fitted below the Storage Hopper. Material flows into the damper controlled by Pneumatic Cylinder.
• The bag will be lifted by bag feeding arrangement from the bag stack. the bag will be reoriented & clamped at the outlet opening of discharge hopper. The bag will be filled to the preset material weight. After filling, the bag will automatically fall down in to the conveyor below which will carry the filled bags.
• This machine is a 03 stage feeding type for better control and accuracy.
• The complete system will be operated Electro-pneumatically by using Electronic Controller.

Automatic Bag Placer

• Automatic bag placer is machine which transfers the empty bag from a stack of bags to the hopper where it is clamped and the material is filled.
• Initially it picks up an empty HDPE/PAPER bag from the stack of bag with the help of vacuum cups.
• In the next stage the empty bag is transferred to an intermediate stage where it is opened using vacuum cups.
• Finally, the bag is transferred to the hopper where it is clamped using pneumatic cylinders.
• The mechanisms are operated pneumatically with logic control interfaced with the other systems.

Automatic Bag Dispenser

• Automatic bag dispenser is machine which transfers the filled bag containing the material from the hopper to the stitching machine using a guided mechanism of linear guides and pneumatic cylinders.
• After the bag has been completely filled & unclamped the arm extends and clamps the bag from the top & supports it from the bottom/sides & places it onto the conveyor.
• After the bag has been shifted from the filling machine the dispenser then guides the filled bags directly into the stitching machine.
• The mechanisms are operated pneumatically with logic control interfaced with the other systems.

Outstanding Features

• Micro Processor based stationary and rotary Electronic Packers
• Fully automatic Filling & Weighing
• Output of the machine is 15 tons/hour/spout
• Digital weighing system with indicator
• Latest stage technology and user friendly designs
• Two stage filling (coarse & fine) of the material inside the bag ensures better accuracy in weighments
• Uses pre-stitched valve type bags. Hence, no stitching is required after the bags are filled
• Same machine can be used for packing cement in jute, HDPE (woven), or paper bags (non-laminated)
• Available in 1 to 6 filling spouts in stationary model and 4 to 16 filling spouts in rotary model
• Easy availability of spares and after sales service.
• Advantages of the Machine

Each spout works as an individual unit to fill 50kg cement bags

• The cement is pushed by the Impeller & since air is required only to fluidize the cement inside the casing, very less air enters into the cement resulting in low spillage
• The filled bag remains hanging on the Nozzle until the microprocessor ensures actual weight of the bag after the filling cycle is completed & the gate is closed. Bag shall be ejected and discharged on conveyor belt at discharge only.
• Flow is controlled by a specially designed Slide gate which is operated by 3 position pneumatic cylinder. This Slide gate is available in vertical a swell as horizontal design.
• It can be use as cement packing machine, Fly Ash packing machine, Gypsum Powder packing machine, bentonite packing machine.
• Ring aeration provided on the back of the nozzle reduces nozzles clogging