Vertical Openwell Submersible Pump

Automatic Grade Semi Automatic
Warranty 1 Year
Application Industrial
Advantage Easy to Operate
Performance Optimum
Speciality Rust resistance

Salient Features

Submerged in water permantatly so no need of separate cabin
Compact design suitable for minimum water level
It also works on low voltage
Noiseless and vibration free operation
Installation without foot valve
Easy installation and servicing

Motor

MOTOR BODY	Stainless Steel with 1% Nickel / Graded Cast Iron
STAMPING	Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
SHAFT	Stainless Steel 420 H&T
TRUST BEARING	Stainless steel 304 tilting pad segment with carbon plate
SEAL	Nitrile Rubber Oil Seal
IMPELLER / ROTOR	Dynamically balanced
WINDDING WIRE	Poly wrape Double coated copper wire

View Complete Details

Ask Latest Price & Details

4 Inch Submersible Pump

Structure Multistage Pump
Application Industrial
Size 100 mm
Advantage Easy to Operate
Performance Optimum
Speciality Rust resistance

Salient Features

Multi Stage Centrifugal Pump With Radial / Mixflow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
It Also Works On Low Voltage
Easy Installation And Easy Servicing
Good Quality Components And Parts Require, less Maintenance

View Complete Details

Ask Latest Price & Details

5 Inch Submersible Pump

Pressure Medium Pressure
Warrenty 1 Year
Application Industrial
Advantage Easy to Operate
Performance Optimum
Speciality Rust resistance

Salient Features

Multi Stage Centrifugal Pump With Radial & Mixflow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
Easy installation And Easy Servicing
It Also Works On Low Voltage
Energy efficient design
Good Quality Components And Parts Require, less Maintenance
50 feet head per stage pumps are design for hihg head application
Janta model pump design for 6″ motor & 7″/8″ pump for high discharge application at low cost

Motor

Motor Body	Stainless Steel With 1% Nickel
Stamping	Electrical Grade Silicon Steel Sheet With 3.9 To 4.5 Watt Loss/hour
Thrust Bearing	Stainless Steel 304 Tilting Pad Segment With Carbon Plate
Bush Bearing	G.M. LTB 4
Rotor Shaft	Stainless Steel 420 H&T
Seal	Nitrile Rubber Oil Seal
Winding	Poly Wrape Double Coated Copper Wire

Pump

Pump Bowl	Graded cast Iron
Pump Shaft	Stainless Steel 410
Impeller	Stainless steel casted dynamicaly balanced
Pump Sleeve	Stainless steel with hard chrome plating
“50” Feet Head Per Stage Pump	Pump bowl stainless steel investment casting

Range

HP	2.0 HP to 30 HP
Single Phase	180 – 240V
Three Phase	300 – 415V
Head	4 Mtrs to 465 Mtrs
Capacity	45 LPM to 1200 LPM
Voltage – AC	180 – 240 V (Single Phase), 300 – 415 V (Three Phase), 50 Hz, 2900 RPM
Number of Model	More than 800 nos.
ISI Model	More than 300 nos.

View Complete Details

Ask Latest Price & Details

6 Inch Submersible Pump

Application Industry
Pressure Medium Pressure
Warrenty 1 Year
Application Industrial
Advantage Easy to Operate
Performance Optimum
Speciality Rust resistance

Salient Features

Multi Stage Centrifugal Pump With Radial & Mixflow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
Easy installation And Easy Servicing
It Also Works On Low Voltage
Energy efficient design
Good Quality Components And Parts Require, less Maintenance
50 feet head per stage pumps are design for hihg head application
Janta model pump design for 6″ motor & 7″/8″ pump for high discharge application at low cost

Motor

Motor Body	Stainless Steel With 1% Nickel
Stamping	Electrical Grade Silicon Steel Sheet With 3.9 To 4.5 Watt Loss/hour
Thrust Bearing	Stainless Steel 304 Tilting Pad Segment With Carbon Plate
Bush Bearing	G.M. LTB 4
Rotor Shaft	Stainless Steel 420 H&T
Seal	Nitrile Rubber Oil Seal
Winding	Poly Wrape Double Coated Copper Wire

Pump

Pump Bowl	Graded cast Iron
Pump Shaft	Stainless Steel 410
Impeller	Stainless steel casted dynamicaly balanced
Pump Sleeve	Stainless steel with hard chrome plating
“50” Feet Head Per Stage Pump	Pump bowl stainless steel investment casting

Range

HP	2.0 HP to 30 HP
Single Phase	180 – 240V
Three Phase	300 – 415V
Head	4 Mtrs to 465 Mtrs
Capacity	45 LPM to 1200 LPM
Voltage – AC	180 – 240 V (Single Phase), 300 – 415 V (Three Phase), 50 Hz, 2900 RPM
Number of Model	More than 800 nos.
ISI Model	More than 300 nos.

View Complete Details

Ask Latest Price & Details

7 Inch Submersible Pump

Pressure Medium Pressure
Warrenty 1 Year
Application Industrial
Size 175 mm
Model Janta
Advantage Easy to Operate
Performance Optimum
Speciality Rust resistance

Salient Features

Multi stage centrifugal pump with Radial & mixflow impeller
It Operate Submerged Beneath The Surface Of Water
Prime mover motors are wet type, water lubricated
Easy installation and easy servicing
It also works on low voltage
Energy efficient design
Good quality components and parts require less maintenance
Janta model pump design for 6″ motor & 7″/8″ pump for high discharge application at low cost

Motor

Motor Body	Stainless Steel With 1% Nickel
Stamping	Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
Thrust Bearing	Stainless Steel 304 Tilting Pad Segment with Carbon Plate
Bush Bearing	G.M. LTB 4
Rotor Shaft	Stainless Steel 420 H&T
Seal	Nitrile Rubber Oil Seal
Winding	Poly Wrape Double Coated Copper Wire

Pump

Pump Bowl	Graded cast Iron
Pump Shaft	Stainless Steel 410
Impeller	Stainless steel casted dynamicaly balanced
Pump Sleeve	Stainless steel with hard chrome plating

Range

HP	2.0 HP to 30 HP
THREE PHASE	300 – 415V
HEAD	4 Mtrs to 465 Mtrs
CAPACITY	45 LPM to 1200 LPM
VOLTAGE – AC	300 – 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBER OF MODEL	More than 800 nos.

View Complete Details

Ask Latest Price & Details

6 Inch Submersible Pump With SS Impeller And Stage

Automatic Grade Manual
Pressure Medium Pressure
Application Industrial
Size 150 mm
Advantage Easy to Operate
Performance Optimum
Speciality Rust resistance

Salient Features

Multi Stage Centrifugal Pump With Radial & Mixflow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
Easy installation And Easy Servicing
It Also Works On Low Voltage
Energy efficient design
Good Quality Components And Parts Require, less Maintenance
50 feet head per stage pumps are design for hihg head application
Janta model pump design for 6″ motor & 7″/8″ pump for high discharge application at low cost

Motor

Motor Body	Stainless Steel With 1% Nickel
Stamping	Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
Thrust Bearing	Stainless Steel 304 Tilting Pad Segment with Carbon Plate
Bush Bearing	G.M. LTB 4
Rotor Shaft	Stainless Steel 420 H&T
Seal	Nitrile Rubber Oil Seal
Winding	Poly Wrape Double Coated Copper Wire

Pump

Pump Bowl	Graded cast Iron
Pump Shaft	Stainless Steel 410
Impeller	Stainless steel casted dynamicaly balanced
Pump Sleeve	Stainless steel with hard chrome plating
“50” Feet Head Per Stage Pump	Pump bowl stainless steel investment casting

Range

HP	2.0 HP to 30 HP
Single Phase	180 – 240V
Three Phase	300 – 415V
Head	4 Mtrs to 465 Mtrs
Capacity	45 LPM to 1200 LPM
VOLTAGE – AC	180 – 240 V (Single Phase), 300 – 415 V (Three Phase), 50 Hz, 2900 RPM
Number Of Model	More than 800 nos.
ISI MODEL	More than 300 nos.

View Complete Details

Ask Latest Price & Details

Single Phase Horizontal Openwell Submersible Pump

Automatic Grade Manual
Warranty 1year
Application Industrial
Advantage Easy to Operate
Performance Optimum
Speciality Rust resistance

Salient Features

Submerge in water permanently, so no need of separate cabin
Priming is not require
It also works on Low Voltage
Noiseless and Vibration free operation
Supplied with foot valve

Motor

MOTOR BODY	Stainless Steel with 1% Nickel / Graded Cast Iron
STAMPING	Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
TRUST BEARING	Thrust Plate With Fiber Pad and CT Bearing of Gunmetal
BUSH BEARING	GM LTB 4
SEAL	Nitrile Rubber Oil Seal
ROTOR SHAFT	Stainless Steel 420 H&T
Impeller	Dynamically balanced
WINDDING WIRE	Poly Wrap Double coated copper wire

Range

HP	2.0 HP to 30 HP
HEAD	4 Mtrs to 465 Mtrs
CAPACITY	45 LPM to 1200 LPM
VOLTAGE – AC	300 – 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBER OF MODEL	More than 800 nos.

Range

HP	2.0 HP to 30 HP
HEAD	5 Mtrs to 75 Mtrs
CAPACITY	40 LPM to 5200 LPM
VOLTAGE – AC	300 – 415 V, 50 Hz, 2900 RPM
NUMBER OF MODEL	166 Nos.
ISI MODEL	More than 300 nos.

View Complete Details

Ask Latest Price & Details

Three Phase Horizontal Openwell Submersible Pump

Pressure High Pressure
Warranty 1year
Advantage Easy to Operate
Usage Industrial
Performance Optimum
Speciality Rust resistance

Motor

Motor Body	Stainless Steel With 1% Nickel
Stamping	Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
Thrust Bearing	Stainless Steel 304 Tilting Pad Segment with Carbon Plate
Bush Bearing	G.M. LTB 4
Rotor Shaft	Stainless Steel 420 H&T
Seal	Nitrile Rubber Oil Seal
Winding	Poly Wrape Double Coated Copper Wire

Range

HP	2.0 HP to 30 HP
HEAD	4 Mtrs to 465 Mtrs
CAPACITY	45 LPM to 1200 LPM
VOLTAGE – AC	300 – 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBER OF MODEL	More than 800 nos.

Range

HP	2.0 HP to 30 HP
HEAD	5 Mtrs to 75 Mtrs
CAPACITY	40 LPM to 5200 LPM
VOLTAGE – AC	300 – 415 V, 50 Hz, 2900 RPM
NUMBER OF MODEL	166 Nos.
ISI MODEL	More than 300 nos.

View Complete Details

Ask Latest Price & Details

8 Inch Submersible Pump

Pressure Medium Pressure
Warrenty 1 Year
Application Industrial
Advantage Easy to Operate
Performance Optimum
Speciality Rust resistance

Salient Features

Multi stage centrifugal pump with Radial & mixflow impeller
It Operate Submerged Beneath The Surface Of Water
Prime mover motors are wet type, water lubricated
Easy installation and easy servicing
It also works on low voltage
Energy efficient design
Good quality components and parts require less maintenance

Motor

Motor Body	Stainless Steel With 1% Nickel
Stamping	Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
Thrust Bearing	Stainless Steel 304 Tilting Pad Segment with Carbon Plate
Bush Bearing	G.M. LTB 4
Rotor Shaft	Stainless Steel 420 H&T
Seal	Nitrile Rubber Oil Seal
Winding	Poly Wrape Double Coated Copper Wire

Pump

Pump Bowl	Graded cast Iron
Pump Shaft	Stainless Steel 410
Impeller	Stainless steel casted dynamicaly balanced
Pump Sleeve	Stainless steel with hard chrome plating

Range

HP	10.0 HP to 80 HP
Three Phase	300 – 415V
Head	15 Mtrs to 280 Mtrs
Capacity	300 LPM to 2400 LPM
Voltage – AC	300 – 415 V (Three Phase), 50 Hz, 2900 RPM
Number Of Model	More than 800 nos.

View Complete Details

Ask Latest Price & Details

10 Inch Submersible Pump

Pressure Medium Pressure
Warrenty 1 Year
Application Industrial
Advantage Easy to Operate
Performance Optimum
Speciality Rust resistance

Salient Features

Multi stage centrifugal pump with Radial & mixflow impeller
It Operate Submerged Beneath The Surface Of Water
Prime mover motors are wet type, water lubricated
Easy installation and easy servicing
It also works on low voltage
Energy efficient design
Good quality components and parts require less maintenance

Motor

Motor Body	Stainless Steel With 1% Nickel
Stamping	Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
Thrust Bearing	Stainless Steel 304 Tilting Pad Segment with Carbon Plate
Bush Bearing	G.M. LTB 4
Rotor Shaft	Stainless Steel 420 H&T
Seal	Nitrile Rubber Oil Seal
Winding	Poly Wrape Double Coated Copper Wire

Pump

Pump Bowl	Graded cast Iron
Pump Shaft	Stainless Steel 410
Impeller	Stainless steel casted dynamicaly balanced
Pump Sleeve	Stainless steel with hard chrome plating

Range

HP	10.0 HP to 80 HP
Three Phase	300 – 415V
Head	15 Mtrs to 280 Mtrs
Capacity	300 LPM to 2400 LPM
Voltage – AC	300 – 415 V (Three Phase), 50 Hz, 2900 RPM
Number Of Model	More than 800 nos.