Waterman Industries Pvt. Ltd.

Sarkhej, Ahmedabad, Gujarat

Product Features :

• 4” Water filled stainless steel submersible motors.
• Easily rewindable (wet wound) induction motor with PE insulated windings.
• Completely stainless steel AISI 304 construction.
• Water lubricated radial and axial thrust bearings.
• Counter thrust bearing.
• Motors are pre-filled with clean water + Glycol mixture.
• Shaft extension made of stainless steel AISI 316.
• High efficiency electrical design (lower operating cost).
• Tropicalized design (lower winding temperature).
• Single phase motors are capacitor start and run design.
• All single phase motors will require control box.
• Pressure compensation diaphragm.

Details

• Ratings: Single phase - 0.37 to 4 kWThree phase - 0.37 to 5.5 kW

• Supply voltages (Tolerance +6% /-10%).
  • 50 Hz, 1 phase, 220 V, 230 V
  • 50 Hz, 3 phase, 380 V, 400 V, 415 V
  • 60 Hz, 1 phase, 115 V, 230 V
  • 60 Hz, 3 phase, 230 V, 380 V, 460 V
  • Degree of protection: IP 68

• Continuous duty
• Rotation: Single phase - CCW

• Maximum nos. of starts/hour:
  • 0.37 to 2.2 kW - 20
  • 3 to 5.5 kW - 10

These motors are heavy duty, rewindable, stainless steel water filled submersible motors which are designed and sized for installation in 8” diameter or larger water wells. They are of robust construction and are furnished with heavy duty radial & thrust bearings to take the extra radial & thrust load when used with high head pump.

Product Features :

• 8” Water filled stainless steel submersible motors.
• Easily rewindable (wet wound) induction motor with PE insulated windings.
• Completely stainless steel AISI 304 construction.
• Water lubricated radial and axial thrust bearings.
• Counter thrust bearing.
• Motors are pre-filled with clean water + Glycol mixture.
• Shaft extension made of stainless steel AISI 316.
• High efficiency electrical design (lower operating cost).
• Tropicalized design (lower winding temperature).
• 8” NEMA coupling flange.
• Pressure compensation diaphragm.

Details

• Ratings: Three phase -
  • 30 to 110 kW, 50 Hz
  • 37 to 110 kW, 60 Hz

• Supply voltages (Tolerance +10% /-15%).
  • 50 Hz, 3 phase, 380 V, 400 V, 415 V
  • 60 Hz, 3 phase, 230 V, 380 V, 460 V
• Continuous duty
• Maximum nos. of starts/hour:
  • 30 to 55 kW - 25
  • 66 to 110 kW - 20
• Minimum cooling flow along the motor:
  • 30 to 37 kW - 30 cm/sec
  • 45 to 110 kW - 45 cm/sec

On Request :

• Mechanical shaft seal Sic/Sic.
• Bulit-in PT 100 temperature sensor.
• Special voltages.
• Double Cable for Star - Delta operation.
• PE2/PA winding insulation.

Product Features :

• 6” Water filled heavy duty stainless steel submersible motors.
• Easily rewindable (wet wound) induction motor with PE insulated windings.
• Completely stainless steel AISI 304 construction.
• Water lubricated heavy duty radial and axial thrust bearings.
• Counter thrust bearing.
• Motors are pre-filled with clean water + Glycol mixture.
• Shaft extension made of stainless steel AISI 316.
• High efficiency electrical design (lower operating cost).
• Tropicalized design (lower winding temperature).
• 6” NEMA coupling flange.
• Pressure compensation diaphragm.

Details

• Ratings: Three phase - 4 to 45 kW

• Supply voltages (Tolerance +10% /-15%).
  • 50 Hz, 3 phase, 380 V, 400 V, 415 V
  • 60 Hz, 3 phase, 230 V, 380 V, 460 V

• Degree of protection: IP 68
• Continuous duty
• Ambient temperature: 45 C
• Rotation: Three phase - CCW and CW

• Maximum nos. of starts/hour:
  • 4 to 22 kW - 20
  • 26 to 45 kW - 15

• water pH: 6.5 - 8

• Minimum cooling flow along the motor:
  • 4 to 15 kW - 15 cm/sec
  • 18.5 to 45 kW - 30 cm/sec

• Motor protection: Select thermal overload
• protection with trip time < 10 sec. at 5 x In
• Maximum submerged depth: 250 meters.
• Mounting” vertical / horizontal (up to 30 kW).

On Request :

• Mechanical shaft seal Sic/Sic.
• Bulit-in PT 100 temperature sensor.
• Special voltages.
• Double Cable for Star - Delta operation.
• PE2/PA winding insulation.