The FPS-1010M allows you to share your MFP (Multi-Function Printer) to your network. Not only printer, but also scanner, fax and card reader can be shared to your network at the same time. With Windows base operation utility, each user can get the MFP to print and scan your document, send a fax or reach the data from the card reader of MFP via FPS-1010M. For More information,

Fiber optic splice closure is usually used with outdoor fiber optic cables; they provide space for the outdoor fiber optic cables to be spliced together. The fiber optic splice closures and the fiber trays inside will protect the spliced fiber and the joint parts of the outdoor fiber cables.

The WAP-4033 supports both IEEE 802.11b and IEEE 802.11g standards. You can use it for connecting to an existing WLAN, or to build up a new wireless LAN. Except essential AP mode, the WAP-4033 provides Repeater, Bridge, WDS, and Client modes to accommodate all kinds of network topology. High data rate (up to 54Mbps) performing allows faster communication between LAN and WLAN. Maximize network efficiency via using the WAP-4033 while minimizing your network investment and maintenance costs. For more detail information

The new Surface Mount Box or the Back Box introduced by us has been designed to fit the entire range of Information Outlets, be it Cat 5e, Cat 6, Single, Dual and Quad. As against the standard surface mount box wherein there is either one or two cable entry points, this SMB has cable entry points on all four sides and in addition one in the centre.

The WRT-416 allows you to setup trigger ports of special applications, and let you utilize Internet service smoothly. The firewall features can protect your Intranet PCs from illegal access and variant DoS attacks from the Internet. The Virtual Server and DMZ functions let you setup your servers in the Intranet and still provide service to the Internet users. Access Control function allows you to block the Internet service to different clients. For more detail information

To segment the network and ease the network traffic, the 5-Port 10/100Mbps is useful for the SOHO switched networks as the friendly network backbone. With providing array LED indicators, the network status can be monitored at a glance. For more information,

Complying with the IEEE 802.11g standard, the WL-U356M provides simple, reliable, high-speed wireless connectivity for both desktop and laptop users. By combining two technologies---USB 2.0 and 802.11g---the gadget delivers data at speed up to 54Mbps, five times the speed of existing 802.11b devices, and spares the effort of opening up the case of your desktop computer. For more detail information.

An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so that light can pass.
Most optical fiber connectors are spring-loaded: The fiber endfaces of the two connectors are pressed together, resulting in a direct glass to glass or plastic to plastic contact, avoiding any glass to air or plastic to air interfaces, which would result in higher connector losses.

In the development of fiber optic technology over the last 30 years, many companies and individuals have invented the "better mousetrap" - a fiber optic connector that was lower loss, lower cost, easier to terminate or solved some other perceived problem. In all, about 100 fiber optic connectors have been introduced to the marketplace, but only a few represent the majority of the market. Here is a rundown of the connectors that have been the leaders of the industry.

We are providing some of the popular FO connectors:

In the development of fiber optic technology over the last 30 years, many companies and individuals have invented the "better mousetrap" - a fiber optic connector that was lower loss, lower cost, easier to terminate or solved some other perceived problem. In all, about 100 fiber optic connectors have been introduced to the marketplace, but only a few represent the majority of the market. Here is a rundown of the connectors that have been the leaders of the industry.

Exceptional material properties and cable design
High ACR values- providing low BER (Bit Error-Rate)
Exceeds Cat 5e Performance
Extremely high pair-balance-providing excellent EMC (Electromagnetic compatibility)
Minimum radiations and maximum noise immunity.
RoHS Compliance
ANSI/TIA/EIA-568-B.2

Fiber optic converters are used in the fiber optic network to transform the signals sent from fiber glass to traditional UTP cables. They are typically used in Ethernet as physical layer networking equipment. Working distance of the fiber optic converters are different .for typical multimode fiber optic converters, their working distance max is about 2km, for single mode fiber media converters, their working distance can be 20km, 40km, 60km, 80km and up to 120km.

10/100Base-TX to 100Base-FX Bridge Media Converters
It is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter.

10/100Base-TX to 100Base-FX SMI Fast Ethernet Converter
The SMI (Small Multimedia Interface) is one kind of POF (Plastic Optic Fiber) interface that can suitable for low-cost and high-speed data transmission.

1 SFP / 2 TP Redundant Fast Ethernet Media Converter
It is designed for critical networks that require fibers or copper links to automatically recover less than 10ms, such as ISPs, telecom, hospitals, banks and enterprises.

2 SFP / 1 TP Redundant Fast Ethernet Media Converter
With the 2-Port redundant Mode, it provides less than 10ms redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link down, it forwards the packet to the other port of the backup pair.

100Base-FX to 10/100Base-TX PoE Media Converter
More than a Fiber Media Converter and also can be a Power over Ethernet Injector as well! The best data link and power sourcing solution for long reach network equipment.

SFP can be regarded as the upgrade version GBIC, SFP is short for Small Form-factor Pluggables, unlike GBIC with SC fiber optic interfaces is with LC interface and the main body size of SFP is only about half of GBIC, which makes SFP space saving. Signal transmitting rate of these modules range from 100Mbps up to 4Gbps or more, working distance of these SFP transceiver modules can be from 500 meters to 100 kilo meters, working wavelength of different SFP modules are typically 850nm, 1310nm and 1550nm, there are also CWDM type SFP transceivers available.

100Base-FX SFP Transceiver

The MFB SFP transceivers using a long wavelength (1310nm) FP LD enable data transmission up to 2km on a multimode optical fiber and up to 60km on a single mode optical fiber.

1000Base-SX/LX SFP Transceiver

The MGB family SFP Mini-GBIC Gigabit Ethernet module can install into Switch products with SFP Mini-GBIC interface.
The distance can be extended from 100 meters (TP), 550 meters (Multi-mode, LC), up to 120 kilometers (Single-mode, LC).

The FPS-1010M allows you to share your MFP (Multi-Function Printer) to your network. Not only printer, but also scanner, fax and card reader can be shared to your network at the same time. With Windows base operation utility, each user can get the MFP to print and scan your document, send a fax or reach the data from the card reader of MFP via FPS-1010M. For More information,

Fiber optic splice closure is usually used with outdoor fiber optic cables; they provide space for the outdoor fiber optic cables to be spliced together. The fiber optic splice closures and the fiber trays inside will protect the spliced fiber and the joint parts of the outdoor fiber cables.

The WAP-4033 supports both IEEE 802.11b and IEEE 802.11g standards. You can use it for connecting to an existing WLAN, or to build up a new wireless LAN. Except essential AP mode, the WAP-4033 provides Repeater, Bridge, WDS, and Client modes to accommodate all kinds of network topology. High data rate (up to 54Mbps) performing allows faster communication between LAN and WLAN. Maximize network efficiency via using the WAP-4033 while minimizing your network investment and maintenance costs. For more detail information

The new Surface Mount Box or the Back Box introduced by us has been designed to fit the entire range of Information Outlets, be it Cat 5e, Cat 6, Single, Dual and Quad. As against the standard surface mount box wherein there is either one or two cable entry points, this SMB has cable entry points on all four sides and in addition one in the centre.

The WRT-416 allows you to setup trigger ports of special applications, and let you utilize Internet service smoothly. The firewall features can protect your Intranet PCs from illegal access and variant DoS attacks from the Internet. The Virtual Server and DMZ functions let you setup your servers in the Intranet and still provide service to the Internet users. Access Control function allows you to block the Internet service to different clients. For more detail information

To segment the network and ease the network traffic, the 5-Port 10/100Mbps is useful for the SOHO switched networks as the friendly network backbone. With providing array LED indicators, the network status can be monitored at a glance. For more information,

Complying with the IEEE 802.11g standard, the WL-U356M provides simple, reliable, high-speed wireless connectivity for both desktop and laptop users. By combining two technologies---USB 2.0 and 802.11g---the gadget delivers data at speed up to 54Mbps, five times the speed of existing 802.11b devices, and spares the effort of opening up the case of your desktop computer. For more detail information.

An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so that light can pass.Most optical fiber connectors are spring-loaded: The fiber endfaces of the two connectors are pressed together, resulting in a direct glass to glass or plastic to plastic contact, avoiding any glass to air or plastic to air interfaces, which would result in higher connector losses.

In the development of fiber optic technology over the last 30 years, many companies and individuals have invented the "better mousetrap" - a fiber optic connector that was lower loss, lower cost, easier to terminate or solved some other perceived problem. In all, about 100 fiber optic connectors have been introduced to the marketplace, but only a few represent the majority of the market. Here is a rundown of the connectors that have been the leaders of the industry. We are providing some of the popular FO connectors:

In the development of fiber optic technology over the last 30 years, many companies and individuals have invented the "better mousetrap" - a fiber optic connector that was lower loss, lower cost, easier to terminate or solved some other perceived problem. In all, about 100 fiber optic connectors have been introduced to the marketplace, but only a few represent the majority of the market. Here is a rundown of the connectors that have been the leaders of the industry.

Exceptional material properties and cable designHigh ACR values- providing low BER (Bit Error-Rate)Exceeds Cat 5e PerformanceExtremely high pair-balance-providing excellent EMC (Electromagnetic compatibility)Minimum radiations and maximum noise immunity.RoHS ComplianceANSI/TIA/EIA-568-B.2

Fiber optic converters are used in the fiber optic network to transform the signals sent from fiber glass to traditional UTP cables. They are typically used in Ethernet as physical layer networking equipment. Working distance of the fiber optic converters are different .for typical multimode fiber optic converters, their working distance max is about 2km, for single mode fiber media converters, their working distance can be 20km, 40km, 60km, 80km and up to 120km.

10/100Base-TX to 100Base-FX Bridge Media ConvertersIt is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. 10/100Base-TX to 100Base-FX SMI Fast Ethernet ConverterThe SMI (Small Multimedia Interface) is one kind of POF (Plastic Optic Fiber) interface that can suitable for low-cost and high-speed data transmission. 1 SFP / 2 TP Redundant Fast Ethernet Media ConverterIt is designed for critical networks that require fibers or copper links to automatically recover less than 10ms, such as ISPs, telecom, hospitals, banks and enterprises. 2 SFP / 1 TP Redundant Fast Ethernet Media Converter With the 2-Port redundant Mode, it provides less than 10ms redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link down, it forwards the packet to the other port of the backup pair. 100Base-FX to 10/100Base-TX PoE Media ConverterMore than a Fiber Media Converter and also can be a Power over Ethernet Injector as well! The best data link and power sourcing solution for long reach network equipment.

SFP can be regarded as the upgrade version GBIC, SFP is short for Small Form-factor Pluggables, unlike GBIC with SC fiber optic interfaces is with LC interface and the main body size of SFP is only about half of GBIC, which makes SFP space saving. Signal transmitting rate of these modules range from 100Mbps up to 4Gbps or more, working distance of these SFP transceiver modules can be from 500 meters to 100 kilo meters, working wavelength of different SFP modules are typically 850nm, 1310nm and 1550nm, there are also CWDM type SFP transceivers available. 100Base-FX SFP Transceiver The MFB SFP transceivers using a long wavelength (1310nm) FP LD enable data transmission up to 2km on a multimode optical fiber and up to 60km on a single mode optical fiber. 1000Base-SX/LX SFP Transceiver The MGB family SFP Mini-GBIC Gigabit Ethernet module can install into Switch products with SFP Mini-GBIC interface.The distance can be extended from 100 meters (TP), 550 meters (Multi-mode, LC), up to 120 kilometers (Single-mode, LC).