Other Products / Services #1797647

Robust Stainless Steel Execution
All components in contact with the material are made of stainless steel and are therefore perfectly suited for critical and abrasive applications.

Efficiency Enhancing Insulation
The drying hoppers are equipped with 40 mm thick insulation across the entire height in order to reduce heat losses and increase drying efficiency.

SmartFlowIntelligent Air Distribution
Automatic air distribution to adjust to different materials and fluctuating material demands.

Integrated CAN Interface
Allows extensive data exchange and status forwarding between the dryer and a central system for visualization.

Convenient Clean Out Door
Drying hoppers of sizes 100 l and up are equipped as standard with a clean-out door ideally suited for the respective hopper diameter. The perfect geometry of the hopper guarantees uniform drying of the material across the entire cross section.

Integrated Sight Glass
For the convenient visual inspection of material flow and material level.

Material Slide Gate
All drying hoppers are included as a standard with a manual slide gate.

The large easy-to-see buttons on the touch screen make it easy to operate in all types of light conditions and ensures the operator has a large surface area to make changes or adjustments in the operation of the blender.

2-Stage filtration system
In first stage pre-filtration takes place by means of the cyclone effect and in the second stage, microfiltration occursby means of a polyester microfilter.

Effective dust blow-off and user-friendliness
The filter surface is cleaned by means of implosion, and the dust is blown into a dust collection bag.
For visual inspection, the dust container is executed in robust glass.

Flow volume is indicated in accordance with the float measuring principle: a cone is lifted by the water flowing in the return of the mold circuit.


Technical Data

• Flow range per circuit: Standard 0 10 l/min. On request: AI, PVC-cones.


• Standard: Mold connections with 12 mm brass socket for 3/8" hoses.
  On request: Threaded connection with G 3/8" brass threaded sleeve with screwed 14 mm brass socket for 1/2" hose, or screwed 20 mm brass socket for 3/4" hose.

• Reliable WITTMANN microprocessor controller.


• Large surfaced built-in air condenser with fan neck.


• Automatic filling: visual control via sight glass.


• 3-7 bar centrifugal pumps with flow volume of 13.2 m3/hr.


• Hermetically welded quality compressor.


• Anti-freeze control.


• Pressure relieve valve in the cooling circuit

• Connection of up to 32 Battery Dryers with 240 Drying Hoppers.


• Optimized Control: Manages internal process of the dryer with failure analysis.


• Dew Point Recording: In the presence of a dew point sensor the actual values are captured and recorded over a 12 hour time period.


• Management of Material Data: Includes all drying hoppers attached to the networked dryer.


• Central Error Display: All error messages are transferred to the M7.2 control and centrally displayed.