Worthington Nitin Cylinders Ltd. Mumbai, Maharashtra

Compressed Natural Gas (CNG) as a fuel is clean and economical and has brought about a healthy reduction in pollution. CNG as an alternate fuel is becoming exceedingly popular worldwide, not only in the developed countries, but also in the third world countries where pollution control is sought in the most viable and economic way. Considering the safety of human life, these cylinders need dedicated attention in design and manufacturing in compliance with various national and international standards. Fulfilling every requirement,   WNCL  provides a wide range of high quality seamless steel CNG cylinders for almost all kinds of vehicles such as three wheelers, cars, buses and various delivery vehicles. They are designed for optimum mechanical properties, keeping in mind the light weight preference. The  WNCL’s  CNG cylinders undergo stringent cyclic testing to assess the fatigue strength, usage life as well as the safety and reliability of the cylinders, which are used under extreme climate conditions.  WNCL’s cylinders can be supplied with or without valve, and with neck threads as per the specifications desired by the customer. All cylinders are epoxy coated on the exterior surface for protection against the environment.

The Cascade, freestanding type with High-pressure seamless gas cylinders for CNG gas Service suitable for a filling pressure of 250 kg/cm 2  at 15ºC. Imorted High Pressure Cylinders are assembled inside a sturdy frame in three independent banks, Low Bank, Medium bank and High Bank. The cylinders are mounted in the frame such that there is no lateral or rotational movement of the cylinder during transportation. The cylinders assembled keeping a minimum gap of 30mm between them. The frame have a lifting eye to facilitate lifting with the crane as well as forklift with full weight of cylinder filled with gas, and have suitable tie down camps the base. The Cascade painted with a special paint to withstand environmental corrosion. The manifolding are suitable for three line sequential filling through the Dispensr. All fittings and valves are of SS 316 rated for the working pressure. Each bank has a liquid pressure guage 0-400 kg/cm 2  assembled in a manifold block. All tubings are SS 316 confirming to ASTM A 269 suitable to absorb contraction, expansion and vibration.

Medical gases like Oxygen, Nitrous Oxide, etc. find an important place in the world of health care. Especially, in critical circumstances relating to respiratory treatment for the revival and restoration of human life and also during medical operations for the use of anesthesia. WNCL’s  medical gas cylinders are designed to comply with the stringent national and international standards. Special care is taken to maintain a smooth clean internal surface to avoid trapping of contaminants. These cylinders can be supplied with Bullnose or Pin Index type valves. The external surface of these cylinders is treated with good quality enamel/epoxy paint as per relevant Indian Standard or as per the customer’s requirements.

CNG Dispensers provide an attractive, high quality solution as the primary point of customer interface at a vehicle fueling station. These dispensers feature the latest innovations in safety and operation, and have been designed to provide the familiar look and function of standard gasoline dispensers. It has a variety of options including single or dual hose configurations, cabinet styles, metering types and internal sequencing.These dispensers are designed for a full range of applications including high speed bus refueling, public filling stations or fleet refueling operations.

Compressed Natural Gas (CNG) as a fuel is clean and economical and has brought about a healthy reduction in pollution. CNG as an alternate fuel is becoming exceedingly popular worldwide, not only in the developed countries, but also in the third world countries where pollution control is sought in the most viable and economic way. Considering the safety of human life, these cylinders need dedicated attention in design and manufacturing in compliance with various national and international standards. Fulfilling every requirement,   WNCL  provides a wide range of high quality seamless steel CNG cylinders for almost all kinds of vehicles such as three wheelers, cars, buses and various delivery vehicles. They are designed for optimum mechanical properties, keeping in mind the light weight preference. The  WNCL’s  CNG cylinders undergo stringent cyclic testing to assess the fatigue strength, usage life as well as the safety and reliability of the cylinders, which are used under extreme climate conditions.  WNCL’s cylinders can be supplied with or without valve, and with neck threads as per the specifications desired by the customer. All cylinders are epoxy coated on the exterior surface for protection against the environment.

The High Pressure Seamless Gas Cylinders provided by  WNCL  are not only meant for industrial use for the storage of gases that provide a protective welding atmosphere, they are also useful for the storage of CO2 Gas that is essential in the making of aerated water and which serves as a propellant for extinguishers, beverages, kegs and the inflation of rubber rafts. In addition to portable wheel type CO2 fire extinguishers,   WNCL’s  Cylinders are also used for system fire extinguishers using CO2, Energen Argonite and Novac - 1230 gases.  WNCL  supplies large cylinders holding water capacity right from 1 Ltr. to 400 ltr. for system applications. WNCL  offers the widest range in light weight CO2 cylinders right from 1 to 34 ltrs. water capacity for hand held, trolley mounted fire extinguishers and for the beverage industry. WNCL  cylinders are approved for use all over the world because of their ability to match various customer requirements. The cylinders are not only supplied with neck threading according to customer requirements, but also with various other fitting like valve & guard/cap and external painting colour that matches national standards or specific customer requirements. The cylinders listed can also be used for Nitrous oxide and all liquefiable gases with test pressures upto 250 Bar. For special applications we can also supply similar cylinders with test pressures upto 325 Bar.