My ExportersIndia

For Buyer

For Seller

For Help

Crushing Machines

We offer a complete product range of Jaw Crusher

Jaw Crusher

The body of our Jaw Crushers Mills are fabricated from best quality ultrasonically tested steel plates (IS 2062). The jaw crushers manufactured by us are designed to minimize vibrations and maximize its strength. These well designed jaw crushers have enabled us to stand amongst leading jaw crushers manufacturers. Additionally, reasonable prices of our jaw crushers mills have placed us in midst of most progressive crushers machine suppliers. THE GENERAL CONSTRUCTION DETAIL
  • Main Frame Body : "YAGNAM" Crushers bodies are fabricated from high class quality ultrasonically tested steel plates (IS 2062). Ribs are provided along the line of stress to give maximum strength and minimize vibration.
  • Eccentric Shaft : An EN series Carbonsteel shaft is used, which is finished to a high degree of accuracy to give an exact stroke to the swing jaw. The raw material is ultrasonically tested & then hardened to ensure a long life.
  • Roller Bearing : Heavy duty self-aligning sperical double roller are fitted to give smooth and economical running of the machine. The bearing used withstand very heavy loads and fluctuations on the line of action of the shaft.
  • Jaw Stock : The Jawstock (levers) is made of high quality cast steel castings (IS 1030) with deep webbing to give it great strength. The bearings seat (bore) of the jaw stock is given very high finish using carbide tools.
  • Housings : Cast Steel housings are provided to support the eccentric shaft and are fitted with heavy duty self aligning sperical roller bearings.
  • Toggle Mechanism : C.I. Toggle Plates are used which act as a "fuse", in case of overloads. They are seated on tempered toggle bearings.
  • Jaw Plates : Jaw Plates are made of high grade Chrome-Manganese steel and they can be reversed end to end, to give maximum life to each jaw plate.
  • Side Wearing Plate : They are also made of high grade Chrome-Manganese Steel which saves the body from wearing.
  • Fly Wheel : Well balanced large diameter flywheels (Flat and "V") are provided, which can be interchanged from side to side. Counter weights are added to balance the eccentricity of the Shaft.
  • Lubrication : Grease nipples are provided at the right places for long life of the bearing.

Specifications Of Jaw Crusher

CRUSHER RANGE -- -- -- --
Size (Inches) Motor Rating (H.P.) Feed Size Max (Inches) Average output in Brass (per 8 hrs.) Speed (rpm)
8 x 5 5 / 7.5 4 1 / 2 300
12 x 7 12.5 / 15 6 6 / 12 300
14 x 7 15 / 20 6 8 / 14 300
16 x 10 25 / 30 9 14 / 30 315
20 x 10 35 / 40 9 24 / 55 325
24 x 12 40 / 50 11 50 / 85 315
PRIMARY CRUSHERS -- -- -- --
24 x 18 40 / 50 16 80 / 140 300
32 x 16 50 / 60 14 100 / 160 300
32 x 20 60 / 75 18 130 / 210 285
36 x 24 100 / 125 22 170 / 300 275
42 x 32 150 / 175 30 300 / 500 275
SECONDARY CRUSHERS (Granulators) -- -- -- --
16 x 6 25 / 30 5 10 / 30 325
24 x 6 30 / 40 5 30 / 50 325
32 x 7 40 / 50 6 50 / 70 325
42 x 8 50 / 60 7 60 / 100 32
NEW ADDITION -- -- -- --
32 x 10 50 9 50 / 90 32
32 x 12 50 11 60 / 100 31
48 x 36 175 / 200 34 400 / 600 275

AVERAGE CRUSHING CAPACITY IN TONS PER HOUR -- -- -- -- -- -- -- -- --
--- Jaw Settings at Opening shown (in mm) -- -- -- -- -- -- -- --
Size (Inches) 12 19 25 32 40 50 75 100 125
8 x 5 1 2 -- -- -- -- -- -- --
12 x 7 2 3 4 5 -- -- -- -- --
14 x 7 3 4 6 7 -- -- -- -- --
16 x 10 6 8 10 12 15 18 -- -- --
20 x 10 12 15 18 20 22 26 34 -- --
24 x 12 -- -- 26 28 30 34 40 -- --
24 x 18 -- -- -- -- 40 48 60 70 --
32 x 16 -- -- -- -- 48 56 68 80 --
32 x 20 -- -- -- -- -- 65 80 95 115
36 x 24 -- -- -- -- -- -- 95 120 140
42 x 32 -- -- -- -- -- -- -- 160 210
SECONDARY CRUSHER GRANULATORS -- -- -- -- -- -- -- -- --
32 x 7 23 28 33 38 45 -- -- -- --
42 x 8 30 36 42 48 55 -- -- -- --
NEW ADDITION -- -- -- -- -- -- -- -- --
32 x 10 -- 24 26 29 33 38 45 -- --
32 x 12 -- -- 28 31 36 41 48 -- --
48 x 36 -- -- -- -- -- -- -- -- 260
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us