Sangli, Maharashtra, India GST : 27AAACY0717F1ZK Verified Supplier
We are leaders in the market for providing best range of penstock Gate, Sluice Gate, Stop Log Gate, Weir Gates and Open Channel Sluice Gate
We are offering penstock valves. Gates- channel & wall mounted sluice gates, stop logs, weir gates, frp gates, mssscialuminium gates, flap gates
We are offering sluice gate. Gates- channel & wall mounted sluice gates, stop logs, weir gates, frp gates, mssscialuminium gates, flap gates, STOP LOG, FLAP GATEs
Stoplogs are generally used to isolate equipments such as pumps, screens, service gates for maintenance and repairs where absolute sealing out of water is not necessary. Water front stoplogs are designed to suit industrial and domestic effluent environments to work against corrosion, ease of operation. Optional features Stoplogs are open channel level controlling gates where single multiple logs (Beams) are inserted in channel. Logs can be of Mild Steel, Stainless Steel, Aluminium, Wood, HDPE Material and coatings are carefully selected to suit the requirements of environment such as saline water, alkalies and acidic water etc. Coatings available such as FRP Epoxy Zinc Galvanizing etc. Adjustable lifting beam can be provided. Chain Pulley crane can be used for beam or gate lifting. Seals can be mechanically fixed and replaced. EPDM neoprene rubber used as per requirements. These have low maintenance and low installation cost.
Weir gates are down word operating sluice gates used in many treatment plants to control the effluent level on one side of the gate. These gates open when gate plate is moved in down word direction to flow the water top of plate. Optional features The weir gates features with neoprene rubber seals mounted so as not to interface with water flow. This provides better sealing. UHMW (Ultra High Molecular Weight) Polyethylene seals are provided to reduce friction. These gates are provided with manual lifting provisions or electric motor, Hydraulic or Pneumatic Actuator as per requirement.
These gates are generally used in open channel of water or sewage. These gates are fixed between two parallel walls used to isolate the flow to and from the open channel. These are light weight, economical Gate assemblies for faster erection. Optional features These sluice gates are suitable for seating and unseating water head. The important factor consider during design is the height of water in closed condition should be less than height of gates. These gates can be self content with operating head fixed on the gate frame. These gates can be provided with flush bottom wall mounted invert bottom arrangement. Depending on the operating pressure and operation frequency rubber seals, metal seals neoprene/ Natural / EPDM Rubber seals with rubber retaining bar are used. These gates are provided with Pin and Knuckle type stem connection for gate plates with spindle for rising spindle arrangement. For corrosion resistance, weather resistance, and saline water resistance suitable coating shall be adopted for long life.
We are offering frp gate. Gates- channel & wall mounted sluice gates, stop logs, weir gates, frp gates, mssscialuminium gates, flap gates
This is a rectangular Sluice Gate suitable for Wall mounting with unseating head up to 30 Meter and off seating head up to 20 Meter as standard with modification higher head is also available. Features and benefits This Sluice Gate is very robust and can be mounted on pipe flange, wall with flange back or flat back mounted with or without thimble. Due to wall thimble is grouted in concrete. This gate can be easily mounted and dismounted with nut bolts fitted on thimble. This sluice gate is used where least leakages are desired. This gate gets verified at shop for the desired water pressure on wall for actual leakages as per quality standards.. F type or E type wall thimble can be used as per requirement. Adjustable wedges with non corrosive wedge plates helps to seal the faces. Stem guide is provided if the operating height is more than 2 Mts. the gate height along with the couplings if required.
These gates are Single faced rectangular or Circular Sluice Gates suitable for wall mounting on seating head of 15 Mtr. These gates are suitable for seating head application only. The standard opening size of these gates is from 200 to 1200 mm. size of different shape with rising and non rising spindle. These are suitable for wall mounting. Optional features Where small and medium volume of raw filtered, Storm water or sewage is to be controlled. For water supply drop of and purification work, sewage plants, drainage water, irrigation, canals. Hydro electric collection, aqua ducts and tail racks. These can be operated by manually hand wheel, with or without gears, pneumatically or with electrical actuators. For extension rod above 2 Meter long guide bracket are necessary to provide for spindle height for non rising spindle thrust bearing shall be provide. Yoke of frame for safe transmission while opening and closing the door. Painting specifications can be selected from Chart 2. Optional features & Accessories can be selected as per requirement. Manual lift is suitable for effort load less than 20 Kg.