Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

ZI

Zoloto Industries
location Industrial Area, Jalandhar, Punjab

Write a Review
Call Now Call Now

Our Products

  1. Industrial Valves 13 Products available
  2. Valves & Valve Fittings 10 Products available
  3. Lift Check Valves 2 Products available
  4. Separators & Strainers 2 Products available

Valves & Valve Fittings

We offer the best product range of Bronze Union Bonnet Globe Valve, Cast Iron Globe Steam Stop Valve, Cast Steel Globe Steam Stop Valve, Forged Steel Globe Valve and Cast Steel Gate Valve.

Bronze Union Bonnet Globe Valve

Bronze Union Bonnet Globe Valve
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Screwed on Bonnet, Rising Stem.
  • Provision for re-packing under pressure.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Handwheel Operated.

Test Pressure (Hydrostatic) :Shell : 35 kg/cmg (500 psig)Working Pressure (Steam) : 10.55 kg/cmg (150 psig)Maximum Working Temperature : 225C

Also available with PTFE Seating for Air and Gas applications, at a nominal extra price.

P.No. Name of Part Material of Construction Specification Quantity
1 Body Bronze IS 318 Gr. LTB 2 1
2 Body Seat Ring Stainless Steel ASTM A276 Type 410 1
3 Disc Stainless Steel ASTM A276 Type 410 1
4 Disc Nut Bronze IS 318 Gr. LTB 2 1
5 Stem Stainless Steel ASTM A276 Type 410 1
6 Bonnet Bronze IS 318 Gr. LTB 2 1
7 Gland Packing Asbestos – – – –
8 Gland Bronze IS 318 Gr. LTB 2 1
9 Gland Nut Bronze IS 318 Gr. LTB 2 1
10 Handwheel Cast Iron IS 210 Gr. FG 200 1
11 Washer Carbon Steel – – – 1
12 Nut Carbon Steel – – – 1
Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B ~ ØC ~ D
1/4 8 60 100 60 1/4″
3/8 10 60 100 60 3/8″
1/2 15 68 117 70 1/2″
3/4 20 84 132 80 3/4″
1 25 95 148 86 1″
1 1/4 32 106 176 102 1 1/4″
1 1/2 40 120 188 115 1 1/2″
2 50 146 216 127 2″
2 1/2 65 180 248 170 2 1/2″
3 80 200 270 170 3″
4 100 248 332 190 4″
View Complete Details
Ask Latest Price & Details
Cast Iron Globe Steam Stop Valve

Cast Iron Globe Steam Stop Valve
  • Flanged Ends to DIN 2533 PN 16RF.
  • Straight Pattern, Outside Screw, Yoke Type, Rising Stem.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Provision for re-packing under pressure.
  • Minimum pressure drop inside the body due to streamlined body design.
  • High lift of the seat to avoid any obstruction in the flow.
  • Sturdy and comparatively bigger sized wheel provided to give sufficient torque for easy operation.

Test Pressure (Hydrostatic) :Shell : 26 kg/cmg (370 psig)Working Pressure (Steam) : 13 kg/cmg (185 psig)Maximum Working Temperature : 220C

P.No. Name of Part Material of Construction Specification Quantity
1 Nut Carbon Steel – – – 1
2 Washer Carbon Steel – – – 1
3 Handwheel Cast Iron IS 210 Gr. FG 200 1
4 Stem Stainless Steel ASTM 276 Type 410 1
5 Yoke Bush Bronze IS 318 Gr. LTB 2 1
6 Locking Screw Carbon Steel – – – 1
7 Gland Flange Cast Iron IBR 86-93 Gr. A 1
8 Bonnet Cast Iron IBR 86-93 Gr. A 1
9 Gland Packing Braided Graphited Asbestos IS 4687  –
10 Studs Carbon Steel IS 1367 As Reqd.
11 Nuts Carbon Steel IS 1367 As Reqd.
12 Gasket Steam Jointing Sheet IS 2712 Gr. W/3 1
13 Stem Nut Stainless Steel ASTM A 276 Type 410 1
14 Stem Ring Stainless Steel ASTM A 276 Type 410 1
15 Disc Cast Iron IBR 86-93 Gr. A 1
16 Seat Ring Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 1
17 Body Seat Ring Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 1
18 Body Cast Iron IBR 86-93 Gr. A 1
19 Nuts Carbon Steel IS 1367 2
20 Bolts Carbon Steel IS 1367 2
Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B~ ØC~
1/2 15 130 160 96
3/4 20 150 166 96
1 25 160 180 118
1 1/4 32 180 196 118
1 1/2 40 200 228 150
2 50 230 250 150
2 1/2 65 290 280 180
3 80 310 295 200
4 100 350 335 235
5 125 400 409 285
6 150 480 470 350
8* 200 600 580 435
View Complete Details
Ask Latest Price & Details
Cast Steel Globe Steam Stop Valve

Cast Steel Globe Steam Stop Valve
  • Flanged Ends to DIN 2545 PN40.
  • Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to streamlined body design.
  • Handwheel Operated.
  • Provision for re-packing under pressure.
  • Suitable for thermic fluid application also.

Test Pressure (Hydrostatic) :Shell : 60 bar (870 psig)Maximum Working Pressure : 40 bar (580 psig)Maximum Working Temperature: 425C

P.No. Name of Part Material of Construction Specification Qty.
1 Nut Carbon Steel – – – 1
2 Washer Carbon Steel – – – 1
3 Handwheel Malleable Iron IS 14329 Gr. BM 300 1
4 Stem Stainless Steel ASTM A 276 Type 410 1
5 Yoke Bush Aluminium Bronze BS EN 1982 AB – 1 1
6 Locking Screw Carbon Steel IS 1367 1
7 Gland Flange Cast Steel IBR 73-80 Gr. B 1
8 Gland Stainless Steel ASTM A 276 Type 410 1
9 Bonnet Cast Steel IBR 73-80 Gr. B 1
10 Gland Packing Braided Graphite  – – –  –
11 Gasket Spiral Wound S.S (Type 316) Graphite Filled  – – – 1
12 Back Seat Bush Aluminium Bronze BS EN 1982 AB – 1 1
13 Stem Nut Stainless Steel ASTM A 276 Type 410 1
14 Disc Cast Steel IBR 73-80 Gr. B 1
15 Seat Ring Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 1
16 Body Seat Ring Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 1
17 Body Cast Steel IBR 73-80 Gr. B 1
18 Nuts H.T Steel ASTM A 194 Gr. 2H As Reqd
19 Studs Alloy Steel ASTM A 193 Gr. B7 As Reqd
20 Nuts For Eye Bolts H.T Steel ASTMA 194 Gr. 2H 2
21 Eye Bolts Stainless Steel ASTM A 182 Gr. F6a 2
22 Pins For Eye Bolts Stainless Steel ASTM A 276 Type 410 2
Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B ~ ØC ~
1/2 15 130 190 120
3/4 20 150 190 120
1 25 160 215 150
1 1/4 32 180 230 150
1 1/2 40 200 259 180
2 50 230 272 180
2 1/2 65 290 316 200
3 80 310 341 235
4 100 350 395 295
6 150 480 500 350
8 200 600 525 435
View Complete Details
Ask Latest Price & Details
Forged Steel Globe Valve

Forged Steel Globe Valve
Salient Features
  • Design Standard API 602 / BSEN ISO 15761 (BS 5352).
  • Body and Bonnet are Phosphated, to ensure maximum resistance from rust.
  • Bolted Bonnet, Outside Screw, Yoke Type, Rising Stem.
  • Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.

Test Pressure :Shell (Hydrostatic) : 207 bar (3000 psig)Seat & Back Seat(Hydrostatic) : 152 bar (2200 psig)Seat (Pneumatic) : 6.9 bar (100 psig)Maximum Working Temperature : 425C

P.No. Name of Part Material of Construction Specification Qty.
1 Body Forged Carbon Steel ASTM A 105 1
2 Body Seat Ring Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 1
3 Disc Stainless Steel ASTM A 276 Type 410 1
4 Stem Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 1
5 Check Nut Stainless Steel ASTM A 276 Type 410 1
6 Gasket Spiral Wound S.S (Type 316) Graphite Filled  – – – 1
7 Bonnet Forged Carbon Steel ASTM A 105 1
8 Bonnet Nut Alloy Steel ASTM A 194 Gr. 2H 4
9 Stud Alloy Steel ASTM A 193 Gr. B7 4
10 Gland Packing Non Asbestos Graphite With Corrosion Inhibitor  – – –  
11 Gland Stainless Steel ASTM A 276 Type 410 1
12 Gland Flange Carbon Steel  – – – 1
13 Eye Bolt Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 2
14 Nut Alloy Steel ASTM A 194 Gr. 2H 2
15 Washer Carbon Steel – – – 2
16 Screw Carbon Steel – – – 2
17 Yoke Bush Aluminium Bronze BS EN 1982 AB – 1 1
18 Handwheel Ductile Iron ASTM A536 1
19 Washer Carbon Steel – – – 1
20 Handwheel Nut Carbon Steel – – – 1
21 Identification Plate Aluminium – – – 1
Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B C ~ ØD ~
1/2 15 80 1/2″ 156 95
3/4 20 86 3/4″ 156 95
1 25 98 1″ 183 95
1 1/4 32 130 1 1/4″ 210 120
1 1/2 40 140 1 1/2″ 250 155
2 50 164 2″ 250 155
View Complete Details
Ask Latest Price & Details
Cast Steel Gate Valve

Cast Steel Gate Valve
Salient Features
  • Design StandardBS EN ISO 10434 / API 600.
  • Bolted Bonnet, Outside Screw, Yoke Type, Rising Stem.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Handwheel Operated.
  • Flanged Ends as per ASME B 16.5 Class-150.

Test Pressure (Hydrostatic) :Shell : 31kg/cmg (425 psig)Seat : 21kg/cmg (313psig)Seat (Steam) : 10.55 kg/cmg (150 psig)Maximum Working Temperature : 425C

P.No. Name of Part Material of Construction Specification Qty.
1 Body Cast Steel ASTM A 216 Gr. WCB 1
2 Body Seat Ring Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 2
3 Wedge Cast Steel ASTM A 216 Gr. WCB 1
4 Wedge Facing Ring Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 2
5 Stem Stainless Steel ASTM A 276 Type 410 / ASTM A 182 Gr. F6a 1
6 Studs Alloy Steel ASTM A 193 Gr. B7  As Reqd.
7 Nuts H.T. Steel ASTM A 194 Gr. 2H  As Reqd.
8 Gasket Steam Jointing Sheet IS 2712 Gr. W/3 1
9 Back Seat Bush Aluminium Bronze BS EN 1982 Gr. AB – 1 1
10 Gland Packing Braided Graphite IS 4687  –
11 Pin For Eye Bolt Stainless Steel ASTM A 276 Type 410 2
12 Gland Stainless Steel ASTM A 276 Type 410 1
13 Gland Flange Carbon Steel – – – 1
14 Nuts H.T Steel ASTM A 194 Gr. 2H 2
15 Eye Bolts Stainless Steel ASTM A 276 Type 410 2
16 Bonnet Carbon Steel ASTM A 216 Gr. WCB 1
17 Sleeve Nut Stainless Steel ASTM A 276 Type 410 1
18 Handwheel Nodular Iron ASTM A 439 D2 1
19 Yoke Sleeve Aluminium Bronze BS EN 1982 AB – 1 1
20 Handwheel Nut Carbon Steel – – – 1
21 Grease Nipple Carbon Steel – – – 1
Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B ~ ØC ~
1 1/2 40 165 330 210
2 50 178 340 210
2 1/2 65 190 395 210
3 80 203 430 225
4 100 229 521 255
5 125 254 568 255
6 150 267 666 356
8 200 292 783 400
View Complete Details
Ask Latest Price & Details
Bronze Ball Valve

Bronze Ball Valve
Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Full Bore, Two Piece Design.
  • Quarter Turn, Lever Operated.
  • Provided with Stainless Steel Ball.
  • Premium Quality PTFE Gland Packing and Seating.

Test Pressure (Hydrostatic) :Shell : 25 kg/cmg (350 psig)Seat : 16 kg/cmg (225 psig)Maximum Working Temperature : 220C

View Complete Details
Ask Latest Price & Details
Forged Steel Gate Valve

Forged Steel Gate Valve
  • Design Standard API 602 / BS EN ISO 15761 (BS 5352).
  • Body and Bonnet are Phosphated, to ensure maximum resistance from rust.
  • Bolted Bonnet, Outside Screw, Yoke Type, Rising Stem.
  • Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.

Test Pressure :Shell (Hydrostatic) : 207 bar (3000 psig)Seat & Back Seat(Hydrostatic) : 152 bar (2200 psig)Seat (Pneumatic) : 6.9 bar (100 psig)Maximum Working Temperature : 425C

P.No. Name of Part Material of Construction Specification Qty.
1 Body Forged Carbon Steel ASTM A 105 1
2 Body Seat Ring Stainless Steel ASTM A276 Type 410 / ASTM A 182 Gr. F6a 2
3 Wedge (Solid) Stainless Steel ASTM A217 Gr. CA 15 1
4 Stem Stainless Steel ASTM A276 Type 410 / ASTM A 182 Gr. F6a 1
5 Gasket Spiral Wound S.S (Type 316) Graphite Filled  – – – 1
6 Bonnet Forged Carbon Steel ASTM A 105 1
7 Bonnet Nut Alloy Steel ASTM A 194 Gr. 2H 4
8 Stud Alloy Steel ASTM A 193 Gr. B7 4
9 Gland Packing Non Asbestos Graphite With Corrosion Inhibitor  – – –  
10 Gland Stainless Steel ASTM A276 Type 410. 1
11 Gland Flange Carbon Steel – – – 1
12 Eye Bolt Stainless Steel ASTM A276 Type 410 / ASTM A 182 Gr. F6a 2
13 Nut Alloy Steel ASTM A194 Gr. 2H 2
14 Yoke Sleeve Aluminium Bronze BSEN 1982 AB – 1 1
15 Handwheel Ductile Iron ASTM A 536 1
16 Identification Plate Aluminium – – – 1
17 Check Nut Stainless Steel ASTM A 276 Type 410 1
18 Washer Carbon Steel – – – 2
19 Screw Carbon Steel – – – 2
Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B C ~ ØD ~
1/2 15 80 1/2″ 143 85
3/4 20 86 3/4″ 146 85
1 25 98 1″ 162 95
1 1/4 32 130 1 1/4″ 192 114
1 1/2 40 140 1 1/2″ 226 155
2 50 164 2″ 230 155
View Complete Details
Ask Latest Price & Details
Stainless Steel Three Piece Design Ball Valve

Stainless Steel Three Piece Design Ball Valve
Salient Features
  • Design Standard BS EN ISO 17292 (BS 5351).
  • Screwed Female Ends to BSPT / NPT / Socket Weld.
  • Reduced Bore, Three Piece Design.
  • Superb in Quality and Performance.

Test Pressure (Hydrostatic) :Shell : 31 kg/cmg (440 psig)Maximum Working Pressure : 21 kg/cmg (300 psig)Seat (Pneumatic) : 7kg/cmg (100psig)Maximum Working Temperature : 220C

.No. Name of Part Material of Construction Specification Qty.
1 Body Stainless Steel ASTM A 351 Gr. CF8M 1
2 Ball Stainless Steel ASTM A276 Type 316 / ASTM A 351 Gr. CF8M 1
3 Thrust Washer PTFE 35% Carbon Filled BS EN 12086 – 1 1
4 Stem Stainless Steel ASTM A276 Type 316 1
5 Packing Ring PTFE 35% Carbon Filled BS EN 12086 – 1 2
6 Gland Stainless Steel ASTM A276 Type 316 1
7 Cup Washer Stainless Steel ASTM A276 Type 316 2
8 Nut H.T. Steel ASTM A 194 Gr. 2H 2
9 Spring Washer Spring Steel / Stainless Steel EN 47 Gr. B / Type 316 1
10 Lever Carbon Steel – – – 1
11 Body Seat Ring PTFE BSEN 12086 – 1 2
12 Gasket PTFE BS EN 12086 – 1 2
13 Spring Washer Spring Steel / Stainless Steel EN 47 Gr. B / Type 316 8
14 Studs Alloy Steel ASTM A 193 Gr. B7 4
15 Nuts H.T Steel ASTM A 194 Gr. 2H 8
16 End Connector Stainless Steel ASTM A 351 Gr. CF8M 2
Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B C ~ D ~
1/2 15 69 1/2″ 38 112
3/4 20 73 3/4″ 40 125
1 25 95 1″ 57 168
1 1/4 32 105 1 1/4″ 65 168
1 1/2 40 115 1 1/2″ 75 177
2 50 128 2″ 75 220
View Complete Details
Ask Latest Price & Details
Cast Steel Three Piece Design Ball Valve

Cast Steel Three Piece Design Ball Valve
Salient Features
  • Design Standard BS EN ISO 17292 (BS 5351).
  • Flanged Ends to ANSI B16.5 Class-150 (Drilled).
  • Three Piece Design.
  • Superb in Quality and Performance.

Test Pressure (Hydrostatic) :Shell : 31kg/cmg (440 psig)Seat :21kg/cmg (30 psig)Seat (Steam) : 10.55 kg/cmg (150 psig)Maximum Working Temperature : 220C

P.No. Name of Part Material of Construction Specification Qty.
1 Body Cast Steel ASTM A 216 Gr. WCB 1
2 Ball Stainless Steel ASTM A 276 Type 304 / ASTM A 351 Gr. CF8 1
3 Thrust Washer PTFE 35% Carbon Filled BS EN 12086-1 1
4 Stem Stainless Steel ASTM A 276 Type 304 1
5 Packing Ring PTFE 35% Carbon Filled BS EN 12086-1 2
6 Gland Stainless Steel ASTM A 276 Type 304 1
7 Cup Washer Stainless Steel ASTM A 276 Type 304 2
8 Nut H.T Steel ASTM A 194 Gr. 2H 2
9 Spring Washer Spring Steel / Stainless Steel EN 47 Gr. B / Type 304 1
10 Lever Carbon Steel – – – 1
11 Body Seat Ring PTFE BS EN 12086-1 2
12 Gasket PTFE BS EN 12086-1 2
13 Spring Washer Spring Steel / Stainless Steel EN 47 Gr. B / Type 304 8
14 Studs Alloy Steel ASTM A 193 Gr. B7 4
15 Nuts H.T Steel ASTM A 194 Gr. 2H 8
16 End Connector Cast Steel ASTM A 216 Gr. WCB 2
Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 ØB C ~ D ~
1/2 15 108 15 38 150
3/4 20 117 20 40 150
1 25 127 25 57 160
1 1/4 32 140 32 65 160
1 1/2 40 165 40 75 202
2 50 178 50 75 202
2 1/2* 65 191 63.5 125 250
3* 80 203 76 137 335
4* 100 229 100 158 335
View Complete Details
Ask Latest Price & Details
Cast Iron Bucket Steam Trap

Cast Iron Bucket Steam Trap
Salient Features
  • Screwed Female Ends to BSP.
  • Inverted Bucket Type, Bolted Cover.
  • With Stainless Steel (S.S304) renewable working parts.

Test Pressure (Hydrostatic) :Shell : 21.10 kg/cmg (300 psig)Maximum Working Pressure : 10.55 kg/cmg (150 psig)Maximum Working Temperature : 220C

P.No. Name of Part Material of Construction Specification Qty.
1 Plug Bronze IBR 282 (a) (iv) Gr. B 1
2 Gasket Steam Jointing Sheet IS 2712 Gr. W/3 1
3 Cover Cast Iron IBR 86 To 93 Gr. A 1
4 Valve Seat Stainless Steel ASTM A 276 Type 304 1
5 Gasket Steam Jointing Sheet IS 2712 Gr. W/3 1
6 Valve Stainless Steel Type 304 1
7 Valve Lever Stainless Steel Type 304 1
8 Valve Hook Stainless Steel Type 304 1
9 Bucket Hook Stainless Steel Type 304 1
10 Bucket Stainless Steel Type 304 1
11 Body Cast Iron IBR 86 To 93 Gr. A 1
12 Bucket Ring Cast Iron IBR 86 To 93 Gr. A 1
13 Nuts Carbon Steel IS 1367 As Reqd.
14 Bolts Carbon Steel IS 1367  As Reqd.
Sizes / Dimensions
Size (Inches) Size (mm) A ~ B
1/2 15 210 1/2″
3/4 20 210 3/4″
1 25 265 1″
1 1/4 32 372 1 1/4″
1 1/2 40 372 1 1/2″
2 50 412 2″
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.