Anaerobic adhesives are the type of adhesives that cure or harden in the presence of active metals and in the absence of oxygen. These adhesives are commonly malleable until enclosed in the absence of air between close fitting active metal surfaces. Anaerobic adhesives are commonmore...
A cylinder head gasket compound is a piece of material that is located between the cylinder head and the engine block inside an internal combustion engine. The purpose of the cylinder head gasket compound is to seal the cylinders to ensure maximum compression and prevent the leakmore...
Anaerobic adhesives are acrylic based adhesives which when applied on metal-surface close-fits and upon isolation from air, cure to form a bond. Used for thread locking, thread sealing, bearing retaining, pipe sealing, flange joint sealing, etc.withstands heavy vibration, shock rmore...
Loctite 242 is a Thread Sealer and locker used in threaded Fasteners. It is an Anaerobic Sealant, which means that it will cure in the absence of Air. It is a Medium Strength thread locker, so it can be used for Fasteners which has to be loosened with any hand tool. Loctite 242 pmore...
Application Industry : General purpose locking and sealing of threaded
Suitable for adjustment of set screws, small diameter or long engagement length fasteners, where easy disassembly is required without shearing the screw. Lock Screw and seal nuts, bolts, and studs in a wide variety of applications where easy removal or adjustment is necessary.more...
My-T-Lok 333 is designed as thixotropic anti sag thread locker, meant, for the locking and sealing of threaded fasteners which require normal disassemble with standard hand tools. Lock and seal coarse threaded studs in a wide variety of applications where medium locking strength more...
Advantage of EPDM self Adhesive Strip: Easy to install, just peel off the self adhesive backing. The adhesive backing tape used is not fully resistance to water, therefore where there is a large amount of moisture or water present; it is advisable to use plain expanded EPDM a goomore...
Anaerobic adhesives and anaerobic sealants cure in the absence of air or oxygen. They are designed for fastening and sealing applications in which a tight seal must be formed without light, heat or oxygen. Anaerobic adhesives are adhesives for metals, and they quickly cures at romore...