Oil mist lubrication systems
the oil mist lubrication unit model ss-oml-15 is specially designed to cope with the requirement where oilling is to be supplied in the form of fogmist. It is available both on intermittentcontinuous discharge.
Operational fuction
the oil mist lubricator consists with an imported acrylic reservoir which is joined with a single or multi outlet block. The oil block is primarily a metering block in which oil discharge corresponds to stroke of small pistons provided inside the block.the pistons which are of spring return type moves with the pressurised air connected to air inlet point of the block. With the movement of pistons, oil is sucked from the reservoir and the sucked quantity is controlledadjusted by adjusting stroke of piston by an adjusting screw.
Device
the system is a combination of a acrylic reservoir tank, vertical float switch, oil block, air regulator, solenoid valve, frl unit, nozzle for mist, timer (for intermittent), four nos. Mounting brackets are provided on the back wall of mist unit to mount the unit on to any vertical surface.
Installation
the systems are suggested to install at some convenient place preferably very nearer to the lubrication points. The mounting dimension are given in the drawing. Mostly 4mm and 1 omm nylon tube is required to connect from block with the lubrication point.
Precaution
mount the systems away from excessive heat, dust and moisture
fill clean and fresh oil of viscosity between 40-60 cst
always keep the unit clean by periodically wiping with cloth
field of application
the oil mist lubricator is best suitable for conveyors, sliding chains, stripes, spindles, drives of power presses and shearing machines, textile machines etc

Oil mist lubrication systems
the oil mist lubrication unit model ss-oml-15 is specially designed to cope with the requirement where oilling is to be supplied in the form of fogmist. It is available both on intermittentcontinuous discharge.
Operational fuction
the oil mist lubricator consists with an imported acrylic reservoir which is joined with a single or multi outlet block. The oil block is primarily a metering block in which oil discharge corresponds to stroke of small pistons provided inside the block.the pistons which are of spring return type moves with the pressurised air connected to air inlet point of the block. With the movement of pistons, oil is sucked from the reservoir and the sucked quantity is controlledadjusted by adjusting stroke of piston by an adjusting screw.
Device
the system is a combination of a acrylic reservoir tank, vertical float switch, oil block, air regulator, solenoid valve, frl unit, nozzle for mist, timer (for intermittent), four nos. Mounting brackets are provided on the back wall of mist unit to mount the unit on to any vertical surface.
Installation
the systems are suggested to install at some convenient place preferably very nearer to the lubrication points. The mounting dimension are given in the drawing. Mostly 4mm and 1 omm nylon tube is required to connect from block with the lubrication point.
Precaution
mount the systems away from excessive heat, dust and moisture
fill clean and fresh oil of viscosity between 40-60 cst
always keep the unit clean by periodically wiping with cloth
field of application
the oil mist lubricator is best suitable for conveyors, sliding chains, stripes, spindles, drives of power presses and shearing machines, textile machines etc