Material : A. Built in detector scintillator size 1” x 1”. B. External detector with scintillator size 1” x 1”.
Rad Check Meter Type : RC 705I manufactured by NUCLEONIX SYSTEMS is primarily designed to inspect & measure Radioactive Contamination (RaC) in steel samples such as billets, rods, rounds, flates, castings, Automotive / Engineering components etc. Components in different sizes & smore...
Alpha Scintillator Screen : A circular Scintillator ZnS screen covered with loose aluminized mylar foil of 125mm dia will be used, with a conical light guide for 2" PMT. 2" PMT of Hamamatsu or ETL or Equivalent.
Viewing area : 100 sq.cm Approx (circular)
Alpha Contamination Probe type ACP-1 of Nucleonix make serves as a large area (Approx. 100 sq.cm) alpha contamination probe. It is designed to work with Nucleonix make Contamination Monitor (Bench Model) CM712 or its equivalent.more...
Backgroud (typical) with 40 mm lead shielding : 900 cpm
This essentially consists of a 2” x 2” NaI Integral detector, with PMT HV bleeder wired & enclosed in a cylindrical shell with appropriate connector brought out for applying HV bias to PMT & also for taking signal output to the Radiation Counting System. This probe with NaI cmore...
We now offer a selection of exempt quantity gamma sources encapsulated in standard size test tubes or rods for use with well type radiation detectors. These sources are exempt sources and of nominal activity. The isotope is deposited as a point source in the bottom of the tube anmore...
Backgroud (typical) with 40 mm lead shielding : 900 cpm
Operating Voltage Range : 900–1000V
This essentially consists of a 2” x 2” NaI Integral detector, with PMT HV bleeder wired & enclosed in a cylindrical shell with appropriate connector brought out for applying HV bias to PMT & also for taking signal output to the Radiation Counting System. This probe with NaI cmore...
Material : A. Built in detector scintillator size 1” x 1”. B. External detector with scintillator size 1” x 1”.
Rad Check Meter Type : RC 705I manufactured by NUCLEONIX SYSTEMS is primarily designed to inspect & measure Radioactive Contamination (RaC) in steel samples such as billets, rods, rounds, flates, castings, Automotive / Engineering components etc. Components in different sizes & smore...
We now offer a selection of exempt quantity gamma sources encapsulated in standard size test tubes or rods for use with well type radiation detectors. These sources are exempt sources and of nominal activity. The isotope is deposited as a point source in the bottom of the tube anmore...
RADMON (micro) Type : RM703E is a G.M. Detector based, battery powered, hand-held, general purpose radiation Survey Meter. This will be useful for dose rate measurements in Nuclear installations, Radiochemical plants, Reprocessing plants, etc. Additionally it will be useful in memore...
Radiation Counting system, type RC605A manufactured by NUCLEONIX is a versatile state of art integral counting system designed around eight bit microcontroller chip for using with a variety of detector probes such as Alpha Beta Gamma scintillator detector probe or End window G.M more...