Listing ID #1373195
Company Information
Ask for more detail from the seller
Contact SupplierVaut Trading is one of the preeminent Bitumen suppliers and exporters, offering a wide range of Bitumen in the global markets. Bitumen is obtained after processing high quality Bitumen components under the keen supervision of the experts. Its long shelf life and moisture free attribute have made our Bitumen hugely appraisable among clients.
Why Our Bitumen Oil?
Sourced From :
Properties | (OPC) | PS-232 / 1983 (R) | BS-12-1996 (42.5N) |
Calcium Oxide (CaO) % | 63.30 | - | - |
Silicon Dioxide (SiO2) % | 21.37 | - | - |
Aluminium Oxide (Al2O3) % | 4.89 | - | - |
Ferric Oxide (Fe2O3) % | 3.97 | - | - |
Magnesium Oxide (MgO) % | 1.54 | 4.00 max. | 5.00 max. |
Sulphur Trioxide (SO3) % | 1.92 | 3.50 max. | 3.50 max. |
Loss on Ignition (L.O.I) % | 1.96 | 3.00 max. | 3.00 max. |
Insolube Residue (LR) % | 0.20 | 1.50 max. | 1.50 max. |
Total Alkalies as Na2O = (Na2O + 0.6559 x K2O) % | 0.70 | - | - |
Chloride (Cr) % | 0.011 | - | 0.10 max. |
Silica Modules (S.M) | 2.41 | - | - |
Alumina Modules (A.M) | 1.23 | - | - |
Lime Saturation Factor (L.S.F) | 0.91 | 0.66 - 1.02 | 0.66 - 1.02 |
Tri Calcium Silicate (C3S) | 51.28 | - | - |
Di Calcium Silicate (C2S) | 22.58 | - | - |
Tri Calcium Aluminate (C3A) | 6.25 | - | - |
Tetra Calcium Alumino Ferrite (C4AF) | 12.07 | - | - |
Physical Test :
Properties | (OPC) | PS-232 / 1983 (R) | BS-12-1996 (42.5N) |
Fineness (Blaine cm2 / gm) | 2980 | 2250 min. | 2250 min. |
Residence on 90 mic. (%) | 4.25 | - | - |
Setting Time :
Properties | (OPC) | PS-232 / 1983 (R) | BS-12-1996 (42.5N) |
Initial (minutes) | 130 | 45 min. | 60 min. |
Final (hours) | 3.13 | 10 hrs max. | - |
Soundness Expn. (Le Chatlier mm) | 1.00 | 10 max. | 10 max. |
Compressive Strength :
Properties | (OPC) | PS-232 / 1983 (R) | BS-12-1996 (42.5N) |
2-Days N (PSI) | 18.76 (2720) | - | 10.00 (1450) |
3-Days N (PSI) | 22.39 (3246) | 15.17 (2200) | - |
7-Days N (PSI) | 29.50 (4278) | 23.45 (3400) | - |
28-Days N (PSI) | 43.75 (6345) | 34.48 (5000) | 42.50 (6162.5) |
Specifications :
Parameter | Values | Test Method |
Bitumen 30/40 | ||
Specific Gravity @ 25/25 C | 1.01 - 1.06 | D-70 |
Penetration @ 25 C | 30/40 | D-5 |
Softening Point C | 55/63 | D-36 |
Ductility @ 25 C | 100 min. | D-113 |
Loss on Heating (wl) % | 0.2 max. | D-6 |
Drop in Penetration after Heating % | 20 max. | D-6 & D-5 |
Flash Point C | 250 min. | D-92 |
Solubility in CS2 (wt)% | 99.5 min. | D-4 |
Organic Matter insolube in CS2 (wt) % | - | D-4 |
Spot Test | Negative | *A.A.S.H.O.T.102 |
Bitumen 40/50 | ||
Specific Gravity @ 25/25 C | 1.01 - 1.06 | D-70 |
Penetration @ 25 C | 40/50 | D-5 |
Softening Point C | 52/60 | D-36 |
Ductility @ 25 C | 100 min. | D-113 |
Loss on Heating (wl) % | 0.2 max. | D-6 |
Drop in Penetration after Heating % | 20 max. | D-6 & D-5 |
Flash Point C | 250 min. | D-92 |
Solubility in CS2 (wt)% | 99.5 min. | D-4 |
Spot Test | Negative | *A.A.S.H.O.T.102 |
Bitumen 60/70 | ||
Specific Gravity @ 25/25 C | 1.01 - 1.06 | D-70 |
Penetration @ 25 C | 60/70 | D-5 |
Softening Point C | 49/56 | D-36 |
Ductility @ 25 C | 100 min. | D-113 |
Loss on Heating (wl) % | 0.2 max. | D-6 |
Drop in Penetration after Heating % | 20 max. | D-6 & D-5 |
Flash Point C | 250 min. | D-92 |
Solubility in CS2 (wt)% | 99.5 min. | D-4 |
Spot Test | Negative | *A.A.S.H.O.T.102 |
Bitumen 85/100 | ||
Specific Gravity @ 25/25 C | 1.01 - 1.06 | D-70 |
Penetration @ 25 C | 85/100 | D-5 |
Softening Point C | 45/52 | D-36 |
Ductility @ 25 C | 100 min. | D-113 |
Loss on Heating (wl) % | 0.5 max. | D-6 |
Drop in Penetration after Heating % | 20 max. | D-6 & D-5 |
Flash Point C | 250 min. | D-92 |
Solubility in CS2 (wt)% | 99.5 min. | D-4 |
Organic Matter insolube in CS2 (wt) % | 0.2 max. | D-4 |
Spot Test | Negative | *A.A.S.H.O.T.102 |