Aakash Hydraulics

Kathwada, Ahmedabad, Gujarat

• Our equipment have been designed to meet the requirements specified for hydro and burst test of brass Fittings of various sizes
• The equipment have been designed to be operated from a local HMI station for ease of operator and required display parameters are also available on HMI screen for better visualization and comfort.
• The hardware selected for the equipment are branded products with absolute reliability and consistent performance.

EQUIPMENT INFORMATION :

• A Hydro test cabinet of aluminium profile heavy duty sections for better ashthestics.
• Transparent poly carbonate sheets for better visualization
• SS water tank.
• Poly-carbonate door with safety interlocks during testing
• Fluid Test Media : Water with additives
• Highly Reliable Air Driven Pressure pump
• PLC for controlling operational sequence
• Ramp Rate control system
• Display of test pressure over HMI screen
• Display of status of operations on HMI
• Display of peak value of the burst pressure in case component bursts before reaching set value of pressure.
• Graphical Display of pressure v/s time curve on HMI screen

DATA ACQUISITION SYSTEM ( OPTIONAL )

• The automatic Data Acquisition System will be equipped with DAQ hardware to log data for burst pressure value automatically with the feedback from high precision pressure sensor.
• The customized Report with company Logo, cylinder serial no will be designed while generating test report.
• To generate and save customized reports in the computer, a PC based software and other required accessories will be included.
• This will help maintaining all the records inside the pc. USB / LAN can be used for communicating with test terminal for transferring the test reports to customer via internet.
• Pressure V/s time curve will be a part of customized test report which will have analytical values of Date/time stamp, pressure, time, total time before burst, and peak value at the time of bursting.

Our equipment have been designed to meet the requirements specified for hydro and burst test of electrical enclosure

The equipment have been designed to be operated from a local HMI station for ease of operator and required display parameters are also available on 10 HMI screen for better visualisation and comfort.

The hardware selected for the equipment are branded products with absolute reliability and consistent performance.EQUIPMENT INFORMATION :

A Hydro test cabinet of aluminium profile heavy duty sections for better ashthetics.Transparent poly carbonate sheets for better visualisationSS water tank for recollection of water after test.Polycarbonate door with safety interlocks during testingLow pressure prefilling pump for Quick filling of test enclosuresFluid Test Media : Water with additivesHighly Reliable Hydraulic Driven Pressure pumpPLC for controlling operational sequenceRamp Rate control systemDisplay of test pressure over HMI screenDisplay of status of operations on HMIDisplay of peak value of the burst pressure in case component bursts before reaching set value of pressure.Graphical Display of pressure v/s time curve on HMI screen

DATA ACQUISITION SYSTEM ( OPTIONAL )The automatic Data Acquisition System will be equipped with DAQ hardware to log data for burst pressure value automatically with the feedback from high precision pressure sensor.

The customized Report with company Logo, cylinder serial no will be designed while generating test report.

To generate and save customized reports in the computer, a PC based software and other required accessories will be included.

This will help maintaining all the records inside the pc. USB / LAN can be used for communicating with test terminal for transferring the test reports to customer via internet.

Pressure V/s time curve will be a part of customized test report which will have analytical values of Date/time stamp, pressure, time, total time before burst, and peak value at the time of bursting.

Standard Model :

Different Model to suit different test pressure requirement.Multi-stroking of IntensifierAnalog pressure Gauge for display of oil and water pressureUser Friendly, Low Maintenance SystemElectric control panel with RYB indication and Multi-stroking functionOil Pressure Regulator for increasing water test pressureArrangement of pressure holding and release is not included in standard model

Special Model: ( Additional Features as per customers selection )Fast/ slow system for controlling pressure over-shootDigital Display of Set pressure Value / Actual Pressure ValueAuto operated pressure Isolation Valve arrangementBurst Point pick up in Digital Mode ( in case of Burst Test pump )Provision of pressure release valve ( manual type )

MODEL NOManual/ Auto IR Max OutletPressure Bar ( PSI ) Min Outlet Pressure Bar ( PSI ) Free Dischargecc/ stroke Power3 Phase Power1 PhaseM 250 / A 250 1.8 250 ( 3570 PSI ) 15 ( 225 PSI ) 246 CC 1.5 HP 0.5 HPM 400 /A 400 3.6 400 ( 5712 PSI ) 20 ( 300 PSI ) 125 CC 1.5 HP 0.5 HPM 700 / A 700 3.6 700 ( 10000 PSI ) 20 ( 300 PSI ) 125 CC 2.0 HP 0.5 HPM 1000 / A 1000 5.8 1050 ( 15000 PSI ) 30 ( 450 PSI ) 125 CC 2.0 HP 0.5 HP

• Our equipment have been designed to meet the requirements specified for hydro and burst test of brass Fittings of various sizes
• The equipment have been designed to be operated from a local HMI station for ease of operator and required display parameters are also available on HMI screen for better visualization and comfort.
• The hardware selected for the equipment are branded products with absolute reliability and consistent performance.

EQUIPMENT INFORMATION :

• A Hydro test cabinet of aluminium profile heavy duty sections for better ashthestics.
• Transparent poly carbonate sheets for better visualization
• SS water tank.
• Poly-carbonate door with safety interlocks during testing
• Fluid Test Media : Water with additives
• Highly Reliable Air Driven Pressure pump
• PLC for controlling operational sequence
• Ramp Rate control system
• Display of test pressure over HMI screen
• Display of status of operations on HMI
• Display of peak value of the burst pressure in case component bursts before reaching set value of pressure.
• Graphical Display of pressure v/s time curve on HMI screen

DATA ACQUISITION SYSTEM ( OPTIONAL )

• The automatic Data Acquisition System will be equipped with DAQ hardware to log data for burst pressure value automatically with the feedback from high precision pressure sensor.
• The customized Report with company Logo, cylinder serial no will be designed while generating test report.
• To generate and save customized reports in the computer, a PC based software and other required accessories will be included.
• This will help maintaining all the records inside the pc. USB / LAN can be used for communicating with test terminal for transferring the test reports to customer via internet.
• Pressure V/s time curve will be a part of customized test report which will have analytical values of Date/time stamp, pressure, time, total time before burst, and peak value at the time of bursting.