- Electric Motor 7.5 HP, 1450 RPM, 50 Hz
- Electric Consumption Per Hr. Approx. 5.59 Unit/hr
Pump :
- Triplex reciprocating pump, brass pump head, ceramic pistons, stainless steel valves and by-pass valve to unload the high pressure.
- Mounting SS Trolley (Closed Body)
- Weight Approx. 70 kgs
- Dimension (L x W x H) 28 x 23 x 18
Standard Accessories Supplied With the Equipment:
- High Pressure hoses 10 mtrs. Long with screw coupling both ends.
- Spray gun assembly
- Lance with V-Jet.
- PVC Nylon Breaded water Inlet Hose 5 meters long
- Electric Cable 5 meters long
Other information :
- Type : High Pressure Triplex Plunger Pump
- Required Suction Pressure : Flooded suction with max 2 bar
- Duty Cycle : Intermittent , 2 to 8 hours / day , & 5-10 min stop after every one hour
- Plunger surface finish : High Finish Ceramic ( < 0.25 Ra )
- Crank Shaft : Forged Alloy steel, Hardened and Ground
Customers Scope :
- Water utility line with minimum line pressure of 2-3 Bar
Water quality:Besides the general characteristics of the water according to the requirements for potable water, the following recommendations can be given from practical experience to prevent corrosion and to reduce furring:
- ph-value 7 to 8, 5 the water has to be in balance of lime and Carbon dioxide which means it shall not contain self aggressive iron carbon dioxide
- Carbonate hardness 6 to 15 dH
- Chlorid content of < 100 mg/l Cl shall be reached
- Filter accuracy 20 m
- Temperature 14C
Write a Review
Bipin Joshi (Aakash Hydraulics)
Plot No. 410, Road No. 10, G.I.D.C, Kathavada, Kathwada, Ahmedabad, Gujarat - 382430, India
Share us via
