Coimbatore, Tamil Nadu, India
GST : 33AFUPC9484R1ZD
Add Review
Our Products
the gasketted plate and frame heat exchangers that are made by us are premium in quality which is made using the best variety of raw materials. This plate heat exchanger is corrosion resistant and can easily be installed anywhere. Plate and frame heat exchangers comes in a compact design that assures greater efficiency, low hold-up volume, expandability and flexibility, easy maintenance, and close temperature approaches.
high heat transfer coefficients, ensuring the designed surface area is kept to a minimum.
compact design, saving on plant room space requirements.
ease of maintenance.
exchanger outputs can be increased by adding additional plates.
exchangers can achieve high cross over temperature profiles.
low standing losses in comparison with other exchanger types.
|
features of plate-fin heat exchanger
main features of plate-fin heat exchanger are as follows:
1. high heat transfer efficiency
the heat transfer efficiency is high is that the fin can cause the disturbance for the fluid to make the thermal boundary layer rupture and renew continuously. The heat transfer coefficient of forced convective gas is 35 to 350 w/ (m2), the overall heat transfer coefficient of forced convective oil is 120 to 1740 w/ (m2), while the overall heat transfer coefficient of gas-gas in the shell-and-tube heat exchanger is only 10 to 35 w/ (m2).
2. compact structure and light weight
its heat transfer area per unit volume is generally 1500 to 2500 m2/m3, which is 8 to 20 times that of the shell-and-tube heat exchanger. The weight of aluminum plate-fin heat exchanger is one tenth that of the shell-and-tube heat exchanger with the same heat transfer area, but its metal consumption per unit heat transfer area can be dozens of times smaller than the shell-and-tube heat exchanger.
3. wide range of application
it can be applicable to the heat transfer of various different fluids such as gas to gas, gas to liquid and liquid to liquid. Depending on the arrangement and combination of various flow passages, the plate-fin heat exchanger can adapt to the heat transfer in different working conditions such as countercurrent, cross flow, multi-flow and multi-pass flow. The plate-fin heat exchanger can be shaped and produced in batch to meet different requirements, so the cost can be reduced and the interchangeability is enlarged.
4. the manufacturing process is complicated and the requirements for manufacture are strict.
5. it is easy to be blocked and the cleaning and maintenance are difficult. If the inner leakage occurs owing to the corrosion, it is hard to maintain the exchanger.
in the practical production, the plate-fin heat exchangers made of aluminum are used for air separation device, petrochemical device and mechanical power equipment, and their service ranges are as follows:
the design temperature is from -200 to 150, and the design pressure is from 0 to 0.6mpa.
|
TECHNICAL DATA |
||
|
MOC-CORE |
TYPES OF FINS |
FLOW TYPE |
|
Aluminium Alloy |
Plain Type Fin |
Cross Flow |
| Abletech Engineering offers shell and tube exchangers starting at 2" ips in all tema types. We design and fabricate to asme code and tema standards. Our shell and tube line utilizes bare tube (straight and u-tubes), helical low-fin outside, longitudinal fins (inside & outside are available). These exchangers are suitable for a variety of applications and are offered in fixed tube sheets or removable bundles. The surface area ranges from (1) square foot to 40, 000 square feet. Pressure range is from full vacuum to over 14, 000 psi (limited by size, material and design condition).
|
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : Wooden case
|
|
|
|
|
|
| ABLETECH ENGINEERING offers shell and tube exchangers starting at 2" IPS in all TEMA types. We design and fabricate to ASME code and TEMA standards. Our shell and tube line utilizes bare tube (straight and u-tubes), helical low-fin outside, longitudinal fins (inside & outside are available). These exchangers are suitable for a variety of applications and are offered in fixed tube sheets or removable bundles. The surface area ranges from (1) square foot to 40, 000 square feet. Pressure range is from full vacuum to over 14, 000 PSI (limited by size, material and design condition). |
| The Gasketed Plate & Frame Type Heat Exchanger that are made by us are premium in quality which is made using the best variety of raw materials. This plate heat exchanger is corrosion resistant and can easily be installed anywhere. Plate and frame heat exchangers comes in a compact design that assures greater efficiency, low hold-up volume, expandability and flexibility, easy maintenance, and close temperature approaches. Typical Applications
|
|
