Ahmedabad, Gujarat, India
Our Products
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Model: | AVFCS-30 | AVFCS-50 |
| No of Filling Head | Single | Double |
| No. of Sealing Head | Single | Single |
| Production Rate | 10 to 30 Vials/Minute | 20 to 50 Vials/Minute |
| Input Specification: | ||
| Container Diameter: | 15mm to 70mm | 15mm to 70mm |
| Container Height: | 25mm to 140mm | 25mm to 140mm |
| Rubber Stopper: | 13mm, 20mm & 28mm Butyl with the help of change part | 13mm, 20mm & 28mm Butyl with the help of change part |
| Filling Range | 2ml to 100ml | 2ml to 100ml |
| Filling Accuracy | ±0.5% to ±1% | ±0.5% to ±1% |
| Power Supply | 1 H.P. | 1 H.P. |
| Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System |
| Optional Accessories | Programmable Logic Control (System) with MMI Safety Cabinet covering full machine | Programmable Logic Control (System) with MMI Safety Cabinet covering full machine |
| Overall Dimension | 1900mm(L) x 800mm(W) x 1680mm (H) (Dimension include basic machine & 24” In-feed turn table) | 2100mm(L) x 800mm(W) x 1680mm (H) (Dimension include basic machine & 24” In-feed turn table) |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Model: | AVFCS-30 | AVFCS-50 |
| No of Filling Head | Single | Double |
| No. of Sealing Head | Single | Single |
| Production Rate | 10 to 30 Vials/Minute | 20 to 50 Vials/Minute |
| Input Specification: | ||
| Container Diameter: | 15mm to 70mm | 15mm to 70mm |
| Container Height: | 25mm to 140mm | 25mm to 140mm |
| Rubber Stopper: | 13mm, 20mm & 28mm Butyl with the help of change part | 13mm, 20mm & 28mm Butyl with the help of change part |
| Filling Range | 2ml to 100ml | 2ml to 100ml |
| Filling Accuracy | ±0.5% to ±1% | ±0.5% to ±1% |
| Power Supply | 1 H.P. | 1 H.P. |
| Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System |
| Optional Accessories | Programmable Logic Control (System) with MMI Safety Cabinet covering full machine | Programmable Logic Control (System) with MMI Safety Cabinet covering full machine |
| Overall Dimension | 1900mm(L) x 800mm(W) x 1680mm (H) (Dimension include basic machine & 24” In-feed turn table) | 2100mm(L) x 800mm(W) x 1680mm (H) (Dimension include basic machine & 24” In-feed turn table) |
| Automatic Vial Filling Stoppering & Capping Machine is made in pleasing matt finished stainless steel materials suitable for filling, rubber stoppering and cap sealing of glass vials. The basic unit consists of turntable, Stainless Steel Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built Stainless Steel 316L Syringes, non- toxic synthetic rubber tubing and easy reach compact panel.The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots. |
| Salient Features | ||
| Suitable for the filling Volume of 2ml to 100ml. | ||
| Piston pump/Peristaltic pump aseptic filling. | ||
| Filling accuracy of 0.5% to 1%. | ||
| Time, Cost & Labor saving as all three operations (Filling, Bunging & Cap Sealing) on single platform. | ||
| No cross contamination. | ||
| Easy to validate filling system for small/large batch production. | ||
| All Contact Parts Made from Stainless Steel 316L & framework by Stainless Steel 304. | ||
| Variable A.C. frequency drive for speed adjustment. | ||
| Digital Vial Counter for counting production output. | ||
| In-feed Turn Table/ Unscrambler for automatic feeding of objects. | ||
| On-line Mechanism. | ||
| No Vial - No Filling System. | ||
| No Vial - Machine Stop System. | ||
| IQ/OQ documentation can be provided. | ||
| PLC system with Graphical User Interface. (Optional) | ||
| Process Operation | ||
| The incoming dry vial (sterilized and siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of Stainless Steel 316L construction and both, glass as well as Stainless Steel syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided for ''No Vial-No Filling'' operation. Syringes are mounted on eccentric block and driving through bottom main gear box. Volume can be either increased or decreased by increasing or decreasing stroke length of piston as per filling size. Syringes is having non return valve for sucking and delivering situation to avoid volume variation. Liquid will reach to filling nozzles through silicon transparent pipe. Nozzle will be having Up and Down movement with help of cam mechanism and it will come down when vial will be hold by starwheel for filling operation and starts filling when it starts to move up and after completion of filling operation, starwheel delivers six vials together on conveyor for rubber stoppering operation. Stoppering unit consist of Starwheel, Vibrator unit and Bowl. The sterilized and siliconised rubber stoppers stored in the vibrator bowl moves vertically to the rubber stopper chute. The vial is hold firmly by starwheel, which will be in continuous rotary motion and vial which is coming from filling unit get in to starwheel and move in rotary direction along with starwheel, during movement it will pick up the rubber stopper from the exit end of the chute and rubber stopper will be pressed by fix single pressing roller, which is spring loaded. Then vial further move on sealing station. Aluminium caps kept in vibratory bowl automatically orient caps in right direction before entering the delivery chute. Vial during its rotation movement with infeed starwheel picks up aluminum seal from the retaining finger of delivery chute and correctly position on the vial before entering sealing turret. Vial now moves on the spring loaded sealing platform, where free spinning sealing rollers moves gradually inside to complete the sealing operation during rotational movement of sealing platform turret. Now sealed vials are transferred to exit starwheel pocket and further moves out on to the flat conveyor belt. Duly sealed vials are collected on out-feed collection tray. | ||
| Model: | AVFCS-30 | AVFCS-50 |
| No of Filling Head | Single | Double |
| No. of Sealing Head | Single | Single |
| Production Rate | 10 to 30 Vials/Minute | 20 to 50 Vials/Minute |
| Input Specification: | ||
| Container Diameter: | 15mm to 70mm | 15mm to 70mm |
| Container Height: | 25mm to 140mm | 25mm to 140mm |
| Rubber Stopper: | 13mm, 20mm & 28mm Butyl with the help of change part | 13mm, 20mm & 28mm Butyl with the help of change part |
| Filling Range | 2ml to 100ml | 2ml to 100ml |
| Filling Accuracy | ±0.5% to ±1% | ±0.5% to ±1% |
| Power Supply | 1 H.P. | 1 H.P. |
| Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System |
| Optional Accessories | Programmable Logic Control (System) with MMI Safety Cabinet covering full machine | Programmable Logic Control (System) with MMI Safety Cabinet covering full machine |
| Overall Dimension | 1900mm(L) x 800mm(W) x 1680mm (H) (Dimension include basic machine & 24” In-feed turn table) | 2100mm(L) x 800mm(W) x 1680mm (H) (Dimension include basic machine & 24” In-feed turn table) |
We are the main supplier of this product.
We are the main supplier of this product.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Model | ALCFM-60 | ALCFM-100 |
| Production Rate | 30 to 60 Bottles/Minute | 50 to 100 Bottles/Minute |
| No. of Filling Heads | Two | Two |
| No. of Capping Heads | One | One |
| Capping Type | ROPP/Screw | |
| - | ||
| Container Diameter | 25mm to 90mm | |
| Container Height | 36mm to 300mm | |
| Filling Range | 30 ml to 1000 ml with the help of suitable change parts. | |
| Cap Diameter | 20mm, 28mm, 30mm & 33mm with the help of change parts | |
| Power Specification | 2.5 H.P. | |
| Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | |
| Optional Accessories | Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine | |
| Overall Dimension | 2300mm (L) X 900mm (W) X 1680mm (H) | 2500mm (L) X 900mm (W) X 1680mm (H) |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Injectable Liquid Filling Machine is made in pleasing matt finished stainless steel materials. The basic unit consists of turntable, Stainless Steel Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built Stainless Steel 316L Syringes, non- toxic synthetic rubber tubing and easy reach compact panel. | ||
| The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots. | ||
| Salient Features | ||
| Suitable for the filling Volume of 2ml to 250ml. | ||
| Piston pump/Peristaltic pump aseptic filling. | ||
| Filling accuracy of 0.5% to 1%. | ||
| No cross contamination. | ||
| Easy to validate filling system for small/large batch production. | ||
| All Contact Parts Made from S.S 316L & framework by S.S. 304. | ||
| Variable A.C. frequency drive for speed adjustment. | ||
| Digital Vial Counter for counting production output. | ||
| IQ/OQ documentation can be provided. | ||
| PLC system with Graphical User Interface. (Optional) | ||
| In-feed Turn Table/ Unscrambler for automatic feeding of objects. | ||
| On-line Mechanism. | ||
| No Vial - No Filling System. | ||
| No Vial - Machine Stop" system. | ||
| Process Operation | ||
| The incoming dry vial (sterilized & siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of Stainless Steel 316L construction and both, glass as well as Stainless Steel syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided for ''No Vial-No Filling'' operation. Syringes are mounted on eccentric block and driving through bottom main gear box. Volume can be either increased or decreased by increasing or decreasing stroke length of piston as per filling size. Syringes is having non return valve for sucking and delivering situation to avoid volume variation. Liquid will reach to filling nozzles through silicon transparent pipe. Nozzle will be having Up and Down movement with help of cam mechanism and it will come down when vial will be hold by starwheel for filling operation and starts filling when it starts to move up and after completion of filling operation, starwheel delivers six vials together on conveyor for rubber stoppering operation. Stoppering unit consist of Starwheel, Vibrator unit and Bowl. The sterilized and siliconised rubber stoppers stored in the vibrator bowl moves vertically to the rubber stopper chute. The vial is hold firmly by starwheel, which will be in continuous rotary motion and vial which is coming from filling unit get in to starwheel and move in rotary direction along with starwheel, during movement it will pick up the rubber stopper from the exit end of the chute and rubber stopper will be pressed by fix single pressing roller, which is spring loaded. Then vial further move on conveyor and collected on out feed starwheel for next sealing operation. | ||
| Model | ALVF-60 | ALVF-120 |
| No of Filling Head | Two | Four |
| Production Rate | 30 to 60 Vials/Minutes | 60 to 120 Vials/Minutes |
| Input Specification: | - | - |
| Container Diameter: | 15mm to 70mm | 15mm to 70mm |
| Container Height: | 25mm to 140mm | 25mm to 140mm |
| Rubber Stopper: | 13mm, 20mm & 28mm Butyl with the help of change part | 13mm, 20mm & 28mm Butyl with the help of change part |
| Filling Range | 2ml to 250ml | 2ml to 250ml |
| Filling Accuracy | ±0.5% to ±1% | ±0.5% to ±1% |
| Power Supply | 1 H.P. | 1 H.P. |
| Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System |
| Optional Accessories | Programmable Logic Control (System) with MMI Safety Cabinet covering full machine | Programmable Logic Control (System) with MMI Safety Cabinet covering full machine |
| Overall Dimension | 1800mm(L) x 850mm(W) x 1680mm (H) (Dimension include basic machine & 30” In-feed turn table) | 2150mm(L) x 850mm(W) x 1680mm (H) (Dimension include basic machine & 30” In-feed turn table) |
| Description | ||
| Sterile Liquid Filling Machine is made in pleasing matt finished stainless steel materials. The basic unit consists of turntable, Stainless Steel Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built Stainless Steel 316L Syringes, non- toxic synthetic rubber tubing and easy reach compact panel.The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots. | ||
| Salient Features | ||
| Suitable for the filling Volume of 2ml to 250ml. | ||
| Piston pump/Peristaltic pump aseptic filling. | ||
| Filling accuracy of 0.5% to 1%. | ||
| No cross contamination. | ||
| Easy to validate filling system for small/large batch production. | ||
| All Contact Parts Made from Stainless Steel 316L & framework by Stainless Steel 304. | ||
| Variable A.C. frequency drive for speed adjustment. | ||
| Digital Vial Counter for counting production output. | ||
| In-feed Turn Table/ Unscrambler for automatic feeding of objects. | ||
| On-line Mechanism. | ||
| No Vial - No Filling System. | ||
| No Vial - Machine Stop System. | ||
| IQ/OQ documentation can be provided. | ||
| PLC system with Graphical User Interface. (Optional) | ||
| Process Operation | ||
| The incoming dry vial (sterilized & siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit.The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of Stainless Steel 316L construction and both, glass as well as Stainless Steel syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided for ''No Vial-No Filling'' operation. Syringes are mounted on eccentric block and driving through bottom main gear box. Volume can be either increased or decreased by increasing or decreasing stroke length of piston as per filling size. Syringes is having non return valve for sucking and delivering situation to avoid volume variation. Liquid will reach to filling nozzles through silicon transparent pipe. Nozzle will be having Up and Down movement with help of cam mechanism and it will come down when vial will be hold by starwheel for filling operation and starts filling when it starts to move up and after completion of filling operation, starwheel delivers six vials together on conveyor for rubber stoppering operation.Stoppering unit consist of Starwheel, Vibrator unit and Bowl. The sterilized and siliconised rubber stoppers stored in the vibrator bowl moves vertically to the rubber stopper chute. The vial is hold firmly by starwheel, which will be in continuous rotary motion and vial which is coming from filling unit get in to starwheel and move in rotary direction along with starwheel, during movement it will pick up the rubber stopper from the exit end of the chute and rubber stopper will be pressed by fix single pressing roller, which is spring loaded. Then vial further move on conveyor and collected on out feed starwheel for next sealing operation. | ||
| Automatic Prefilled Syringe Filling Machine is suitable for the filling prefilled syringe uses in pharma applications. Machine is compact and provides higher production output. Machine is suitable for application in pharmaceuticals, biotech and Biopharmaceutical industry. |
| Process Operation | ||
| Syringes loaded on Stainless Steel in-feed hopper. Prefilled syringe tray can directly loaded on to the machine. Syringes move from infeed station to the filling station filling is done by electronic pump. After desired volume filling syringe transfer on stoppering station stoppering is done on well designed manner. Duly filled & stoppered syringes delivered on outfeed collection tray without hand touch. | ||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | ||
| Aseptic Liquid Filling Machine is made in pleasing matt finished stainless steel materials. The basic unit consists of turntable, Stainless Steel Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built Stainless Steel 316L Syringes, non- toxic synthetic rubber tubing and easy reach compact panel.The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots. | ||
| Salient Features | ||
| Suitable for the filling Volume of 2ml to 250ml. | ||
| Piston pump/Peristaltic pump aseptic filling. | ||
| Filling accuracy of 0.5% to 1%. | ||
| No cross contamination. | ||
| Easy to validate filling system for small/large batch production. | ||
| All Contact Parts Made from Stainless Steel 316L & framework by Stainless Steel 304. | ||
| Variable A.C. frequency drive for speed adjustment. | ||
| Digital Vial Counter for counting production output. | ||
| In-feed Turn Table/ Unscrambler for automatic feeding of objects. | ||
| On-line Mechanism. | ||
| No Vial - No Filling System. | ||
| No Vial - Machine Stop System. | ||
| IQ/OQ documentation can be provided. | ||
| PLC system with Graphical User Interface. (Optional) | ||
| Process Operation | ||
| The incoming dry vial (sterilized & siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of Stainless Steel 316L construction and both, glass as well as Stainless Steel syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided for ''No Vial-No Filling'' operation. Syringes are mounted on eccentric block and driving through bottom main gear box. Volume can be either increased or decreased by increasing or decreasing stroke length of piston as per filling size. Syringes is having non return valve for sucking and delivering situation to avoid volume variation. Liquid will reach to filling nozzles through silicon transparent pipe. Nozzle will be having Up and Down movement with help of cam mechanism and it will come down when vial will be hold by starwheel for filling operation and starts filling when it starts to move up and after completion of filling operation, starwheel delivers six vials together on conveyor for rubber stoppering operation. Stoppering unit consist of Starwheel, Vibrator unit and Bowl. The sterilized and siliconised rubber stoppers stored in the vibrator bowl moves vertically to the rubber stopper chute. The vial is hold firmly by starwheel, which will be in continuous rotary motion and vial which is coming from filling unit get in to starwheel and move in rotary direction along with starwheel, during movement it will pick up the rubber stopper from the exit end of the chute and rubber stopper will be pressed by fix single pressing roller, which is spring loaded. Then vial further move on conveyor and collected on out feed starwheel for next sealing operation. | ||
| Model: | ALBF-60 | ALBF-100 |
| Production Rate | 30 to 60 Containers/Minute | 60 to 120 Containers/Minute |
| Input Specification | - | - |
| ntainer Diameter | 25mm to 90mm | |
| ontainer Height | 36mm to 300mm | |
| Filling Range | 30 ml to 1000 ml with the help of suitable change parts. | |
| Power Specification | 1.5 H.P. | 2 H.P. |
| Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | |
| Optional Accessories | Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine | |
| Overall Dimension | 1800mm (L) x 900mm (W) x 1680mm (H) | 2000mm (L) x 900mm (W) x 1680mm (H) |
he minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots. Salient Features Suitable for the filling Volume of 2ml to 100ml.Piston pumpPeristaltic pump aseptic filling.Filling accuracy of 0.5% to 1%.Time, Cost & Labor saving as all three operations (Filling, Bunging & Cap Sealing) on single platform.No cross contamination.Easy to validate filling system for s
| Adinath introduces state-of-art Automatic Dry Syrup Powder Filling Machines for filling of large volume powder into containers. Machine is widely uses in pharmaceutical, cosmetic, veterinary, herbal & food industries. We are having two type of model, first is Automatic Single Wheel Dry Syrup Powder Filling Machine which provides output up to 3000 bottles/hour and other is Automatic Double Wheel Dry Syrup Powder Filling Machine which provides output up to 6000 bottles/hour. This robust design built from stainless steel material for long life and GMP compliance. |
| Salient Features | ||
| No Container - No Filling system eliminates wastage of costly powders | ||
| Machine can be operated in Single Stroke to Four Stroke and provide output up to 50 fills per minute with an accuracy of 2% depending upon powder type and fill size. | ||
| All the parts which are coming in contact with the product are made out of S.S 316 material and easily Removable for mandatory autoclaving/sterilization. | ||
| Totally enclosed heavy steel structure body to avoid any vibration. | ||
| Variable AC Frequency drive to control the speed of the conveyor. | ||
| Endless conveyor belt to prevent jamming of assembly due to spillage of powder. | ||
| Process Operation | ||
| The incoming sterilized dry bottle is fed through the in-feed turn table. Suitable guide supply bottles on to flat conveyor belt at the required speed for feeding. There is filling head mounted on machine top plate in the same line. When bottle reaches to the mechanical holder detained filling station, Bottle sensor sense the bottles and Magnetic clutch starts to rotate which is mounted on auger shaft. It fills the desired amount of powder into the bottle through auger, where rotation time is previously determined. Duly filled bottles go upward on to the sealing station with the help of SS conveyor belt. | ||
