Write a Review
Our Products
We offer a complete product range of Onion Skin Tube Filler Sealer, Online Vial and Bottle Inspection Machine, Tube Filling Crimping And Batch Coding Machine, Rotary Bottle Washer Machine and Automatic Bottle Washer
| Onion Skin Tube Filler built on principle of slant travel of tubes while filling and sealing, to take care of vide variation of tube neck dimensions & thicknesses of available standard tubes. The Filling unit built on Stainless Steel Square pipe frame and totally encompassed with Stainless Steel coverings, in pleasing matt finish. Further, the large opening available at the bottom side for ease of absolute cleaning. The pendant type electrical control panel is lifted from machine for ease of operation and safety. |
| Salient Features | ||
| Compact model. | ||
| All contact parts made from high quality Stainless Steel 316 & other Non-contact parts made from Stainless Steel 304. | ||
| No Tube No Filling system. | ||
| Tube neck centering during gas flushing and filling operations. | ||
| Possibility of nitrogen gas flushing before, during and after filling. | ||
| Full accessibility allows easy maintenance. | ||
| Machine equipped with pre-warming station. | ||
| Minimum change over time, little maintenance & easy cleaning. | ||
| Process Operation | ||
| The sterilized tube tray directly loaded in to slant hopper of the unit. The Synchronized star wheel delivers tubes, one by one on moving eccentric tube rack in single. During the stoppage of rack sequentially pre-gassing, filling, post gassing, pre heating and final sealing is achieved. | ||
| Model | OFS-55 | OFS-100 |
| Overall Dimension | 915mm (L) x 760mm (W) x 965mm (H) | 1070mm (L) x 815mm (W) x 965mm (H) |
| Non Contact Parts | Made from Stainless Steel 304 | Made from Stainless Steel 304 |
| Tube Height | 40mm to 110mm | 40mm to 110mm |
| Contact Parts | Made from Stainless Steel 316L | Made from Stainless Steel 316L |
| Electrical Characteristics | 230 Volts, Single Phase, 50 Hertz, 4 Wire System | 230 Volts, Single Phase, 50 Hertz, 4 Wire System |
| Power Specification | 0.5 H.P. | 0.5 H.P. |
| No. of Nozzles | Twin | Four |
| Nitrogen Flushing | Pre & Post Nitrogen Flushing Available | Pre & Post Nitrogen Flushing Available |
| Require Gas for Sealing | LPG & Oxygen (O₂) | LPG & Oxygen (O₂) |
| Filling Accuracy | ± 1% | ± 1% |
| Production Output | 15 to 30 tubes/minute | 50 to 100 tubes/minute |
| Online Vial & Bottle Inspection Machine is uses for inspecting liquid vials & bottles. Online Vial & Bottle Inspection Machine is having application in Pharmaceutical, Biotech & Veterinary industry. This equipment consist three-track conveyor with a hood with lighting arrangement and visual inspection background of alternate black & white color. Inspection table have stainless steel structure with moving stainless steel slat chain. Structure made out of stainless steel square pipe & supported on adjustable bolts. Machine complies as per GMP standards. |
| Salient Features | ||
| PVC black & white board as per GMP norms. | ||
| SS elegantly matt finishing. | ||
| Variable AC frequency variable drive for speed adjustment. | ||
| Direct gear drive. | ||
| Length can be made as per customers requirement. | ||
| UHMW self lubrication guide below chain. | ||
| Adjustable height of conveyor belt, to align with other machine of the line. | ||
| Self-alignment bearing for easy maintenance. | ||
| Rigid Vibration free Construction for trouble free performance. | ||
| Process Operation | ||
| The central conveyor belt brings the bottle from the capping machine conveyor. These bottles are automatically bifurcated on the two adjoining conveyor belts & further on the side tables for operators sitting on either side of the table. The operators in turn pick up the bottles & visually inspect the bottles in the alternate white & black background to check for any particles in the liquid filled, sealed & breakage of bottle. After inspection the bottles are placed in the central track, which is transfer for labeling. | ||
| Production Output | 100 Containers/Minute |
| Input Specification | - |
| Container Diameter: | 22mm to 100mm |
| Container Height: | 58mm to 240mm |
| Number of Operators | Four (2x2) |
| Power Specification | 0.5 H.P. |
| Electrical Characteristics | 220 Volts, Single phase, 50 hertz |
| Conveyor Height | 850mm to 900mm adjustable |
| Overall Dimension | 1850mm (L) x 700mm (W) x 1550mm (L) |
| ||||||||||||||||||||||||||
| Salient Features | ||
| No Tube - No Filling" system. | ||
| Suitable for filling, sealing coding of Aluminum tube as well as plastic LAMI tubes by changing over the sealing device. | ||
| Electrical jacketed S. S. Hopper with thermostatic control to keep the material hot, while filling for a smooth flow of material. | ||
| Machine is provided with stirring device, so that no active ingredients in the material can stick to the inner wall of hopper. | ||
| All contact parts made of S. S. 16 material. | ||
| Relay electrical control system with operating panel with start, stop, and inch. | ||
| Variable A.C. drive motor for the speed adjustment. | ||
| Model | ATFM-60 |
| Production Output | 20 to 60 tubes / minute |
| Filling Volume | 5 ml to 100 ml |
| Input Specification | - |
| Tube Size Diameter: | 12mm to 25mm |
| Tube Size Length: | 50mm to 200mm |
| Power Specification | 3 H.P. |
| Electrical Characteristics | 440 volts, 3 Phase, 50 Hertz |
| Overall Dimension | 1450mm (L) x 1150mm (W) x 1750 (H) |
Adinath International (Adinath International)
Shed No.20,near Torrent Sub-station,suryam Industrial Park Odhav Nikol, Ring Road, Nikol, Ahmedabad - 382350, Gujarat
Share us via
