dubai, United Arab Emirates
Write a Review
Our Products
Our product range contains a wide range of CANVAS CLOTH COATING ANTI FUNGAL and VAPOUR BARRIER COATING ANTI FUNGAL
30 36 AF (Antifungal Coating)
(ANTI FUNGAL LAGGING ADHESIVE COATING)
30-36 AF is specially formulated anti-fungal water based adhesive and coating for bonding and Coating canvas cloth, glass cloth, or other lagging jackets over thermal insulation and suitable for use in tropical areas where high temperature and humidity are a problem. It is designed to resist mild fungus and mild growth, and protect the insulation from discoloring or deteriorating effects. 30-36 AF is a non flammable in wet state and fire retardant when dry. 30-36 AF has the same qualities and results of the standard 30-36 with the features of indoor/outdoor use and excellent fungus resistance.
COLOR : WhiteODOR : Blend in wet state. Odorless when dry.BASE : Synthetic elastomers emulsion
VOC CONTENT : Volatile organic compounds 58 grams/lit less water.DENSITY : 10.5 + 0.2 LBS/GALSOLIDS CONTENT : 60% + 2%VISCOSITY :50000-60000CPS(Brookfield)COVERAGE : Upto 180sq.ft/gal
Depending on texture of insulation, application temperature ranges from 35F to 120F.
Service Temperature Range: 0F to 200F.
BONDING RANGE: Upto 40 minutes
STORAGE: Keep from Freezing
SHELF LIFE: One Year in unopened containers.
CLEAN UP:Warm water and soap when wet, mineral spirits when dry.
WATER VAPOUR PERMEANCE: 0.8 perms (19 mll DF) ASTM E-96 Procedure B 0.03 perms at 0.028 in dry film thickness (0.02 metric perms and 0.7 mm) as per ASTM F-1249. Tested at 120F (48.88C) and 90% relative humidity.
PHYSICAL AND CHEMICAL RESISTANCE:Good resistance to water oil grease etc. while having excellent resistance to aging 30-36AF is good for use both interior and exterior application.
APLICATION SUGGESTIONS: Brush on a lagging cloth to hold and follow with a double coat for finish. Certified that 30-36AF exceeds the requirements of NFPA 90A & 90B confirms to ASTM E 84. Surface burring characteristics applied to inorganic reinforced cement board.
Flame Speed : 5
Smoke Developed : 5
Tested as applied at a coverage range of 90sq.ft per gallon. Flash point of adhesive (closed cup) No Flash point to boiling.
30 80 VBC (Vapor Barrier Coating)
(ANTI FUNGAL LAGGING ADHESIVE COATING)
DESCRIPTION:
30-80 is a special polymer based fire resistant, flexible coating. It is specially formulated for use over most type of thermal insulation, both interior and exterior.
USES:
30-80 is used for sealing and fitting, piping, vessel ducts and equipment operating at below ambient temperatures. 30-80 exhibits excellent adhesion on mineral wool, glass fiber and polyurethane foam. It is safe in all environments because it is water based and it provides seamless liquid membrane.
ADVANTAGES:
Elastic, crack bridging and toughVapour barrier and weather proofExcellent adhesionSmooth finish on almost all substratesCan be used internally and externallyEasy to apply and water washable.
APPLICATION:
The surface must be clean and free of any dust, dirt, oil, grease and loose particles.
Apply an even coat of 30-80 by brush or spray. It should spread out equally on surface. Once the initial coat dries, apply finish coat by brush or spray.
PACKING:
Available in 20 lit. plastic bucket.
COVERAGE:
2 Sq.M app. @ 650 micron
STORAGE:
When stored in original, unopened container the average life is 12 to 14 months at 20C to 30C.
HEALTH AND SAFETY INSTRUCTION:
Caution should be always exercised with all the construction chemicals. Gloves and goggles must be worn while using these chemicals. Any splashes to the eyes or skin should immediately be treated with fresh water. Should any of the products be accidentally swallowed, do not induce vomiting and call for medical help immediately.
ANBI GENERAL TRADING LLC (ANBI GENERAL TRADING LLC)ANBI General Trading L.L.C
P.O Box - 112089
Showroom - 8 & 9, Rigga Street
Deira, Dubai, United Arab Emirates, United Arab Emirates
Share us via
