ThisVibration MeterVM-6360is a useful tool in machinery vibration monitoring. It measuresacceleration(peak), displacement(peak to peak)velocityandrevolution(RPM) with high accuracy. The digital displayed vibration level is one of the best indications of machine running condition.
VM-6360uses anexternal accelerometerandmagnetic baseto improve frequency response and provide a more repeatable vibration reading. Frequency ranges are utilized for broad detection abilities. It use headphones as an electronic stethoscope to listen for bearing defects or other mechanical faults while taking readings
VM6360is ideal for fast and precise measurements of the speed the furthest common measuring parameter of the vibration measurement alternatively in cm/s (centimeter per second) or ft/s (foot/s).
It is specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes. In accordance withISO2954, it can also be used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
Features
- Individual high quality accelerometer for accurate and repeatable measurements
- Bearing condition monitoring function
- Large and Clear LCD display
- Light weight and easy to use
- Piezoelectric accelerometerandmagnetic base
- 5 Parameters: Velocity, Acceleration, Displacement, Speed (RPM) and Frequency
- Wide frequency range (10 Hz 10 kHz) in acceleration mode
- Automatic power off
- Maximum Hold
- Low Battery Indicator
Specifications
- LCD Display: 4 digits, 18mm
- Transducer: Piezoelectric accelerometer
- Parameters measured: Velocity, Acceleration, Displacement, Speed (RPM) and Frequency
- Measuring range:
- Velocity (RMS): 0.01 40.00 cm/s (0 16.00 inch/s)
- Acceleration (Peak): 0.1 40.00 m/s2(0.3 1312 ft/s2)
- Displacement (Peak Peak): 0.001 - 4.000 mm (0.04 160.0 mil)
- Speed: 60 99, 990 r/min (RPM) (Readings should be multiplied by 10 if the display show "10")
- Frequency: 1 20 kHz
- Frequency Range
- Acceleration (Peak): 10 Hz 1 kHz (in "1" mode) and 10 Hz 10 kHz (in "10" mode) for bearing condition checking
- Velocity (RMS): 10 Hz 1 kHz
- Displacement (Peak Peak): 10 Hz 1 kHz
- Accuracy: 5% n + 2 digits
- Metric / Imperial conversion
- Output: AC Output 2.0V peak full scale (load resistance: above 10k)
- Power Supply: 4 x 1.5 AAA size batteries (not included)
- Operating Temperature: 0 50 C (32 122 F)
- Operating Humidity:
Abu Dhabi, United Arab Emirates
Write a Review
Ashok Kamra (Global Hardware and Tools Llc)
Share us via
