Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

SS

Superme Steel LLC
location dubai, United Arab Emirates

Write a Review
Call Now Call Now

Our Products

  1. Steel & Steel Products 2 Products available
  2. Iron & Metal Alloys 2 Products available
  3. Iron Products 1 Products available
  4. Natural And Synthetic Resin 1 Products available
  5. Copper Components 1 Products available
  6. Fasteners 1 Products available
  7. Others Products 3 Products available

Natural And Synthetic Resin

Our product range contains a wide range of PP Polypropylenes

PP Polypropylenes

PP Polypropylenes
  • Density                             0, 92 g/cm^3
  • Colour                           Natural / Beige Grey / Black
  • Chemical Designation    PP (Polypropylene)

PP stockholders and suppliers, delivering throughout the Middle East. The lightest of all thermoplastics yet with mechanical capabilities beyond those of high density polyethylene, its primary use is in the chemical industry due to its alkaline / acid resistance. At ambient temperature it resists almost any kind of chemical attack and at temperatures close to 70C very few chemical agents can harm it. It is a highly recyclable plastic with very little impact on the environment. Higher hardness or wear resistance from abrasion can be achieved when it is reinforced with glass fiber

orm of Supply

Supreme Steel are stockholders and suppliers of POM round bar and flat sections which can be sawn cut to your required sizes.

Contact our experienced sales team who will assist you with your POM enquiry.

Plate Flat Diameter

Applications :

  • Water Treatment Plants.
  • Food Processing Industry.
  • Drip Pans.
  • Seals.
  • Ventilation Ducts.

Analysis :

  • Very low water absorption.
  • Great resistant to dilute acids, solvents and cleaning agents.
  • Very tough.
  • Great electrical insulation.
  • Easily weldable.

PROPERTIES RESULT UNIT PARAMETER NORM USED
Mechanical Properties
Modulus of Elasticity 2000 MPa 1 mm/min DIN EN ISO 527-2
Tensile Strength 33 MPa 50 mm/min DIN EN ISO 527-2
Tensile Strength at Yield 33 MPa 50 mm/min DIN EN ISO 527-2
Elongation at Yield 5 % 50 mm/min DIN EN ISO 527-2
Elongation at Break 65 % 50 mm/min DIN EN ISO 527-2
Flexural Strength 54 MPa 2 mm/min ,10 N DIN EN ISO 178
Modulus of Elasticity (flex test) 1800 MPa 2 mm/min ,10 N DIN EN ISO 178
Compression Strength 15 / 26 MPa 1% / 2%. 5 mm/min,10 N EN ISO 604
Compression Modulus 1600 MPa 5 mm/min,10 N EN ISO 604 
Impact Strength (Charpy)  140 Kj/m^2  Max. 7,5j DIN EN ISO 179-1EU
Notched Impact Stren.(Charpy)  - Kj/m^2  Max. 7,5j DIN EN ISO 179-1EU
Ball Indentation Hardness 100 MPa - ISO 2039-1
Thermal Properties
Glass Transition Temperature -10 ºC - DIN 53765
Melting Temperature 165 ºC - DIN 53765
Service Temperature 140 ºC Short Term -
Service Temperature 100 ºC Long Term -
Thermal Expansion 13 10^-5  K^-1 23-60ºC long DIN EN ISO 11359-1;2
Thermal Expansion 14 10-^5  K^-1 23-100ºC long DIN EN ISO 11359-1;2
Specific Heat - J/(g+K) - ISO 22007-4:2008
Thermal Conductivity - W/(K+m) - ISO 22007-4:2008
Electrical Properties
Surface Resistance - Ω - DIN IEC 60093
Miscellaneous Properties
Water Absorption 0,01 / 0,02 % 24h / 96h (23ºC) DIN EN ISO 62
Resistance to Hot Mater / Bases (+) - - -
Resistance to Weathering - - - -
Flammability (UL94) HB - According to DIN IEC 60995-11-10
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.