PP Polypropylenes

Chemical Designation PP (Polypropylene)
Colour Natural / Beige Grey / Black
Density 0,92 g/cm^3
Supply TypeManufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

PP stockholders and suppliers, delivering throughout the Middle East. The lightest of all thermoplastics yet with mechanical capabilities beyond those of high density polyethylene, its primary use is....

Company Information

Member Since 8 Years
Nature of Business Supplier

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

PP stockholders and suppliers, delivering throughout the Middle East. The lightest of all thermoplastics yet with mechanical capabilities beyond those of high density polyethylene, its primary use is in the chemical industry due to its alkaline / acid resistance. At ambient temperature it resists almost any kind of chemical attack and at temperatures close to 70°C very few chemical agents can harm it. It is a highly recyclable plastic with very little impact on the environment. Higher hardness or wear resistance from abrasion can be achieved when it is reinforced with glass fiber

orm of Supply

Supreme Steel are stockholders and suppliers of POM round bar and flat sections which can be sawn cut to your required sizes.

Contact our experienced sales team who will assist you with your POM enquiry.


Plate	Flat	Diameter

Applications :

Water Treatment Plants.
Food Processing Industry.
Drip Pans.
Seals.
Ventilation Ducts.

Analysis :

Very low water absorption.
Great resistant to dilute acids, solvents and cleaning agents.
Very tough.
Great electrical insulation.
Easily weldable.

PROPERTIES	RESULT	UNIT	PARAMETER	NORM USED
Mechanical Properties
Modulus of Elasticity	2000	MPa	1 mm/min	DIN EN ISO 527-2
Tensile Strength	33	MPa	50 mm/min	DIN EN ISO 527-2
Tensile Strength at Yield	33	MPa	50 mm/min	DIN EN ISO 527-2
Elongation at Yield	5	%	50 mm/min	DIN EN ISO 527-2
Elongation at Break	65	%	50 mm/min	DIN EN ISO 527-2
Flexural Strength	54	MPa	2 mm/min ,10 N	DIN EN ISO 178
Modulus of Elasticity (flex test)	1800	MPa	2 mm/min ,10 N	DIN EN ISO 178
Compression Strength	15 / 26	MPa	1% / 2%. 5 mm/min,10 N	EN ISO 604
Compression Modulus	1600	MPa	5 mm/min,10 N	EN ISO 604
Impact Strength (Charpy)	140	Kj/m^2	Max. 7,5j	DIN EN ISO 179-1EU
Notched Impact Stren.(Charpy)	-	Kj/m^2	Max. 7,5j	DIN EN ISO 179-1EU
Ball Indentation Hardness	100	MPa	-	ISO 2039-1
Thermal Properties
Glass Transition Temperature	-10	ºC	-	DIN 53765
Melting Temperature	165	ºC	-	DIN 53765
Service Temperature	140	ºC	Short Term	-
Service Temperature	100	ºC	Long Term	-
Thermal Expansion	13	10^-5 K^-1	23-60ºC long	DIN EN ISO 11359-1;2
Thermal Expansion	14	10-^5 K^-1	23-100ºC long	DIN EN ISO 11359-1;2
Specific Heat	-	J/(g+K)	-	ISO 22007-4:2008
Thermal Conductivity	-	W/(K+m)	-	ISO 22007-4:2008
Electrical Properties
Surface Resistance	-	Ω	-	DIN IEC 60093
Miscellaneous Properties
Water Absorption	0,01 / 0,02	%	24h / 96h (23ºC)	DIN EN ISO 62
Resistance to Hot Mater / Bases	(+)	-	-	-
Resistance to Weathering	-	-	-	-
Flammability (UL94)	HB	-	According to	DIN IEC 60995-11-10