Pumps, Pumping Machines & Parts #4684874

Aeron Engineering is a cast iron centrifugal pump supplier in India. We are offering Cast-Iron Centrifugal Pumps. These are horizontal pumps: end suction, horizontal, centrifugal coupled pumps with semi-open impellers. Our series JCP pumps are centrifugal semi-open impeller type pumps for smaller volumes using less floor space

Cast Iron Centrifugal Pumps Features:

• Non-clogging tendency
• Handle light slurries
• Without problems
• Micrometric wear adjustable facility hence
• Worries at the constant head for longer period
• Grease/Oil lubricated bearing
• Dynamically balanced impeller
• Less noise
• No vibration
• Centre delivery
• No Air locking

Cast Iron Centrifugal Pumps Features:

• Smaller Volume Using less floor space
• Grease /Oil lubricant bearing
• Temp. up to 120oC
• Suitable With V-belt Drive or directly coupled with a motor
• A heavy-duty shaft, sturdy construction, simple design, back pull-out design
• micrometric wears an adjustable facility hence, works at a constant head for a longer period
• Non-clogging and handles solids up to 10 mm
• Direction is clockwise from a drive end

Choose us and order our products as we are a trusted cast iron centrifugal pump manufacturer.

Aeron Engineering is the right magnetic drive sealless pump supplier. A sealless mag drive pump is a conventional centrifugal pump without the dynamic seal that would normally be used to seal the pump shaft. This dynamic seal is replaced by a static containment shell to form a completely sealed liquid end or pressure boundary.

Sealless centrifugal pumps with magnetic drives have been around in the industry for 70 years now. They offer plant engineering contractors and operators a 100% leakage-free pump associated with the highest operational safety, low maintenance and adherence to strict environmental standards.

Mag drive pumps are displacing centrifugal pumps with double mechanical seals as they have proved to be a greater cost-effective solution for hard-to-seal applications and the handling of hazardous, volatile and aggressive chemicals.

Zero leakage and total control of fugitive emissions, making these pumps environmentally friendly and a clear option for handling hazardous or volatile chemicals.

Order our magnetic drive sealless pump today.

SPECIAL FEATURES:-

• Excellent quick automatic action without foot valve up to 8 mtrs.
• Automatic air release during priming.
• Back pull out design, so easy maintainance without disturbing pipe lines.
• Dynamically balanced rotating parts ensure less vibrations.
• Better efficiency because of good hydraulic design.
• Minimum parts, fast repairing at low cost, Also pump is available at economical rate.
• Available in Bare, Coupled, Monobloc, Belt driven & Engine driven version.
• Also offered pump with trolley / trailer to move it from one place to another.
• Monobloc pumps can be able to with stand with wide voltage fluctuations.
• Less expensive & easily available spares.
• Pumps can be fitted with mechanical seal as per customer's requirements.
• Very simple construction, only two moving parts.
• Easy inspection of impeller.
• Large diameter solids handled. up to 60 mm
• High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available with ceramic coating
• Easy to install: - only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.
• Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance.

APPLICATION:-

• Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
• Dewatering Basements, Trenches, Construction sites. Onboard shift, as bilge, for desk wash & engine cooling Tiles & Marble factories, effluent plants.
• Mobile Machinery : Cooling water for marine engines and shovels.
• Any application where priming is to be avoided.
• Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.
• Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.
• Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.
• Waste treatment: pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralizing liquids; pumping out settled sludge.
• Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with well point system or drains; water supply from wells or canals; hosing down concrete castings.
• Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilizers, distribution of liquid animal feed; transfer of must; washing.

TYPICAL APPLICATION:-

• Liquid containing sand mud or solids in suspension with pH from 5-13 , smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralizing liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circulation
• Water circulation in paint spray booths; stripping fuel tanks circulation
• Recovery of dirty solvents
• Transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline)
• Liquid fertilizer transfer, circulation and spraying, brackish or sea water containing sand
• Brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board
• Marine duty; brine, sea intake and circulation of sea water in swimming pools
• Pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products
• Recovery of spills from chemical plant; transfer or circulation of caustic soda or potash
• At Drilling Rigs

Aeron Engineering supplies quality PVDF centrifugal pumps to customers and clients. PVDF Pump stands for Polyvinylidene Fluoride Pump which has a huge demand in the plastic industry and is known mainly for its chemical inertness and excellent resistance to ageing. They are designed to ease the processing by all the convection used in the plastic industry. If you are interested in the same.

The offered Polyvinylidene Fluoride Pumps have a stable bearing pedestal, designed to ensure hassle-free working in all conditions. Before you invest in a PVDF Centrifugal Pump or any other kind of Industrial Pump like Process Pumps or Chemical Pumps, have a look at its specifications and features to know the pumps better.

Benefits of PVDF Pumps:

Chemical process pumps designed for rough and tough conditions and suitable for high system pressures.

It contains thick-walled vacuum-proof plastic housing in one piece and has no additional sealing points within the pump followings.

Plastic housing is completely encapsulated in a metal body to prevent any damage to the same.

Any pipeline forces are absorbed by the metal shell.

Ensure trouble-free working because of its heavy-duty pedestal.

Modular system ensures economical spare parts stocking.

Order today.

Aeron Engineering offers polypropylene centrifugal pumps to customers all around the country. Our polypropylene pumps are designed especially for high-corrosive chemicals where metal is not recommended or its cost is high. These pumps are centrifugal corrosion resistant with horizontal radially split one-piece volute casing design fitted with semi-open impeller single entry single stage for smooth running performance against corrosion according to the standards.

In polypropylene pumps, high alumina ceramic sleeve is used to protect the shaft from any type of corrosion and abrasion. Mechanical seals prohibit leakage from the pumps and the best-cast iron heavy-duty oil-lubricated bearing housing helps for achieving maximum strength of pumps.

Salient Features:

Low maintenance due to minimum components.

Leakproof and also run dry without damage in rotating parts.

Compact design

All the products of our company are made with quality parts and materials. We ensure that customers are satisfied with the Products we supply. Therefore order our products today.

“AERON” Brand Rotary Gear Pumps are prepared by graded cast iron in economic range which is easy to maintain.
All “AERON” Gear Pumps are designed and assembled with closed clearance to avoid internal losses, thus it consumes less power and operates at higher efficiencies.
Single Helical Gears, Hardened & Ground Shafts, Self lubricated Sintered bronze Bush/Bearing, Effective Built in pressure Relief Valve. Low Noise, High efficiency, Reliable by Low Cost.

Features :

• Single Helical Gear Concept
• Hardened & Ground Shafts
• Capacity upto 500 LPM
• Max working pressure 10 Kg/cm2
• Temperature upto 250’C
• Higher Aesthetic Value

TYPE OF PUMPS

• Plunger Type
• Mechanical Actuated Diaphragm Type
• Hydraulic Actuated Diaphragm Type
• Solenoid Type (E-Dose)

SALIENT FEATURES

• High Volumetric Efficiency of 94%
• High Dosing Accuracy of =/- 1%
• Flow Variation Possible From 10-100%
• Linear relation between control setting and stroke length
• Positive Feedback Crank Mechanism
• Double Diaphragm Design

APPLICATIONS

• WASTE WATER AND EFFLUENT TREATMENT : Dosing of Alum and Hydro Chloride of ETP.
• SUGAR INDUSTRIES : Anti Scaling Dosing, Phosphoric Acid, Flocculent.
• MINERAL PROCESSING : Dosing of Flocculent and Catalyst.
• CHEMICAL INDUSTRIES : Metering of Resin and Catalysts.
• PHARMACEUTICAL INDUSTRIES : Coating of Tablets, ETP
• OIL INDUSTRIES : Odorizing of Natural Gas, Methanol, butane, Propane, Injection.
• PAPER INDUSTRIES : Melamine and resin addition, chlorine dosing for bleaching and many more.

Features :

• Pumps are made of Solid PP/PVDF Components.
• There is no Lined Components.
• Suitable for corrosive duties in the Process and Chemical Industries.
• Can Work Continously.
• Self Venting type Casing.
• Dynamically and Hydraulicaly balanced Impeller with Aerodynamic Profile vanes.
• PP Temperature Range is upto 70 Deg C
• PVDF Temperature Range is upto 150 Deg C

Salient Features :

• Vertical Pumps are Customized Made according to customer Requirements.
• Easy to Install
• We give with Coupling design for Easy Maintanence.
• No Seal, No Gland Packing
• AERON Pump is suitable to Handle Acids, Organic Chemicals, ETP, STP, Pickling, Scrubber, Polymers, Etc.

SPECIAL FEATURES:-

• Comparatively low initial installation cost
• low operating cost
• safe & quite operation
• Easy to install
• Requirement of less auxiliary equipments
• Dual Sheathed water proof cable
• Most Reliable & Hard Wearing
• Tailor-made designs
• Multipurpose application
• Easy & Cost effective serviceability.

Aeron Engineering high quality, Polypropylene Vertical Submerged Pump Manufacturer. We deliver pumps that provide all services for chemical pumps requirement to many industries including military, mining, aerospace, pulp and paper, petroleum and chemical. For years, our company has been a producer of pp-pump, an Industrial polypropylene pump for severe duty, high pressure, and high tolerance applications.

Our Company has achieved specialization as a leading Manufacturer and Exporter of all types of pumps from India. Our company is dyed-in-the-wool in manufacturing first-class quality PP Pump, Polypropylene-Pump, Poly Propylene Pumps and Non-metallic Pumps to cover the Indian as well as Export markets.

All our PP Pumps are measured with high-quality standards to cover all types of applications and service support. Our company offers you various ranges of industrial pp pumps for all your chemical process handling requirements.

Our strength is excellence produced at inexpensive values, prepared delivery and the unflinching assurance to excel.

Choose us and get our products we are a trusted PVDF vertical submerged pump manufacturer.

Features :

• Pumps are made of Solid PP/PVDF Components.
• There is no Lined Components.
• Suitable for corrosive duties in the Process and Chemical Industries.
• Can Work Continously.
• Self Venting type Casing.
• Dynamically and Hydraulicaly balanced Impeller with Aerodynamic Profile vanes.
• PP Temperature Range is upto 70 Deg C
• PVDF Temperature Range is upto 150 Deg C

Salient Features :

• Vertical Pumps are Customized Made according to customer Requirements.
• Easy to Install
• We give with Coupling design for Easy Maintanence.
• No Seal, No Gland Packing
• AERON Pump is suitable to Handle Acids, Organic Chemicals, ETP, STP, Pickling, Scrubber, Polymers, Etc.

 Features :

• All the Wetted Parts are made from Investment Castings giving excellent Surface Finish, Sound casting, Better efficiency.
• Maximum interchangeability therefore minimum spare parts inventory required to be maintained.
• Back pull out design permits quick inspection, repairs of rotary assembly without disturbing pipe line and motor connections.
• Hydraulic performance maintained by simple external axial adjustment of impeller wear.
• Exclusive balanced thrust.
• Standard dimensions cut layout cost.
• Fully Open Impeller for various fluid transfer ranging from clear to suspended Solids.

Salient Features :

• Pump Available in SS 316, SS 316L, Cast Iron, Cast Steel Investment Casting.
• Arrangement for Cooling Seal or Packing at elevated temperature.
• Removable SS Shaft Sleeve Simplifies Maintenance.
• Maximum Sealing Flexibility- Inside or Outside Seal & Single or Double Seal.

Applications :

• CHEMICAL : Caustic Transfer, Hot Water, Cold Water, Acid Unloading, Monomer & Polymer Transfer, Molten Sulphur and Urea, Liquid Ammonia, Liquid Nitrogen.
• PETROCHEMICAL : Aromatics, Low Specific gravity Hydrocarbons, Gas Oil.
• PULP & PAPER : Digester make up-green and white Liquor and black liquor recovery, Coating Slurries, clay, Titanium Dioxide and Alum Transfer.
• STEEL & MILL
• INDUSTRY : Waste Acid Recovery, Scrubber Service, Pickle Liquor Circulation.
• GENERAL : Food, Pharmaceutical, Pollution Control, condensate Return, Filter Feed DM Water, Etc.