My ExportersIndia

For Buyer

For Seller

For Help

Our Products

  1. Relays 4 Products available
  2. Circuit Breaker 3 Products available
  3. Starters 2 Products available
  4. Modems 1 Products available
  5. Power Contactors 1 Products available
  6. Laptops, Computers & Mainframes 1 Products available
  7. Cables And Wire Accessories 1 Products available
  8. Sockets 1 Products available
  9. Current Limiting Device 1 Products available
  10. Instrumentation Cables 1 Products available
  11. Changeover Switches 1 Products available
  12. Industrial Wires 1 Products available
  13. Nuts Bolts And Fasteners 1 Products available
  14. Inverters, UPS & Converters 1 Products available
  15. Batteries 1 Products available
  16. Network Switch 1 Products available
  17. Modular Switches 1 Products available
  18. Others Products 18 Products available

Fuses, Circuit Breakers & Components

Our Complete range of products are Residual Current Device and Switch Disconnector.

Residual Current Device

  • Rated current 10-100 А
  • Rated operating voltage 230/400V; 50/60Hz
  • Rated residual current 30/100/300/500 mA
  • Number of poles 2/4
  • Surge voltage wear resistance ≥2 000V
  • Short circuit current wear resistance: 6000А
  • IP code IP>20
  • Ambient temperature -10°÷45ºС
  • Maximum altitude Up to 2000m
Residual current operated circuit-breakers are amperometric protection devices which trip when the system leaks a significant current to earth.They continuously calculate the vector sum of the single-phase or three-phase system line currents and, while the sum is equal to zero, they allow electricity to be supplied; supply is rapidly interrupted if the sum exceeds a value preset according to the sensitivity of the device.
Residual current operated circuit-breakers can be classed according to three parameters:
  • Detectable wave form
  • Tripping sensitivity and tripping time
  • Besides, depending on the type of construction, residual current devices (RCDs) may be classed as RCBOs (magnetothermic with overcurrent protection), RCCBs (without overcurrent protection releaser incorporated) and RCD blocks
View Complete Details

Switch Disconnector

  • Material Cermaic, Plastic
  • Certification CE Certified
  • Application Commercial
  • Country of Origin 110V
  • Frequency 50Hz
  • Power 0-5Kw
  •  Warranty 1Year
The switch-disconnector is largely used as the main switch in low voltage switchgears for distribution of power, starting and stopping motors and isolating loads during maintenance. They are also enclosed in metal or plastic boxes as safety switches to ensure that accidental start of machines is prevented.TThe range from 16 to 160 Amp are either base plate or door mounted by snap-on or screw fitting. Front operated 3-, 4-, 6-, 8-pole and change over types are available as standard.From 200 up to 3150 Amp the switch-disconnectors, also called load break switches, are designed as pole modules and they are available as 1- to 4-pole versions, front or side operated.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us