The Gang operated load break switches are meant for outdoor application and are suitable for horizontal or vertical mounting. They are designed for satisfactory performance in harsh atmospheric conditions of high/low temperatures & humidity. Their primary function is to isolate a 33kV, 3 Phase network.

FEATURES

* Single break type with 2/3 post insulators per pole. Quick make & break manual operation.

* Suitable for operation upto a altitude of 3000 m.

* Suitable for mounting at the top of a single or double steel pole.

* Used for single / three phase applications and suitable for operation on structures 6 meters or more above ground level with a pad lock facility.

* Robust sturdy design with bottom MS channel of adequate dimensions which imparts requisite strength.

* Copper contacts are made of ETP grade high conductivity copper and are spring loaded for adequate contact pressure. The contacts are duly plated to improve resistance to corrosion and offers a low resistance current path.

* All MS parts and Hardware are duly hot dip galvanized as per standard specifications which imparts long life to the switch.

* The Isolator is capable of withstanding the electrical & mechanical stresses induced during unlikely event of a short circuit.

* Sturdy operating mechanism is provided allowing easy operation 6 meters or above ground level with simultaneous operation of all the three poles making perfect electrical contact. Mechanical locking facility is provided for closed & open positions as required.

* The Post insulators are with min. creepage distance of 1150 mm suitable for heavily polluted atmosphere and meets the stringent requirements of IEC.

* The operating GI pipe provided along with the switch conforms to Medium Class as per IS 1239-1/ Eqvl and is 6000 mm in length.

* A choice of terminations can be provided to suit individual customer requirements.

It consists of manual/motor operated spring charged mechanism of stored energy type.

In the closed state of breaker, the closing spring can perform the duty operation. Facility is also available for hand charging the springs in the event of control supply failure. The closing spring is charged in less than 15 sec. Electrical Anti-pumping feature is also provided.

The mechanism is trip free and suitable for rapid Re-closing. The vacuum interrupters are capable of switching capacitive currents and small Magnetizing current.

Salient Features

Conforms to IS2147. IEC-62271-100, IEC- 60298 & IEC-60694.

Fully compartmentalized & internal arc

compliance as per standards.

Emergency tripping arrangement without

opening the breaker chamber front door.

Extensible & modular construction.

High reliability.

Re-strike free.

Horizontal isolation, horizontal drawn-out.

Self aligning type cluster contacts for robust design.

Stored energy type spring closing mechanism.

Fully interlocked for operational safety.

Asiatic manufactures a wide rang e o f L.V. Distribution Switch Boards / Feeder Pillars which are designed to meet the ndividual requirements of the customers.

3 phase, 4 wire, 50hz upto 500/660 volts

Upto ip55 protection class

Powder coated

Floor mounting or flange connected

Removable doors/covers

Modular design

Doors have removable lift off hinges with 130 to 180 opening angle and are fitted with epdm / neoprene seals with a range of locking system.

Large cable entry area from bottom through removable cable gland plates cubicle switch boards are supplied in different combination of fuse switch units and off-load isolators as required by the customer

Bus bars used are of electrolytic copper supported on non-hygroscopic dmc/hylam supports rigidly fixed on to the frame work. The bus bars are designed to withstand the desired faulty currents

Metering or protection to suit customer needs can be provided on demand

Emergency incomer provision can also be provided on request

Door defeat interlocks-optional

Available in crca / hr, galvanized mild steel or aluminum sheet en closures

The fabricated enclosures/housings undergo a process of chemical pretreatment as per laid down procedures before being powder coated.

Our standard range of fuse carriers are made from DMC which has high impact & di-electric strength and are suitable for BS-88 HRC fuse links. The FuseCarriers are available in 82.5 & 92 mm fixing centers in Finger grip, and Through grip options. The fuse carriers are also available in porcelain with 82.5mm fixing centers.

The Surge Arrestors are an indispensable protection devise which needs to protect a transformer against natural lightning & switching surges in a high voltage system. They are designed for satisfactory performance in critical atmospheric conditions of high/low temperatures & humidity. Asiatic offers the latest Gap less Metal oxide technology which is far superior than conventional systems being used previously in terms of vast improvement in VA curves & increased through current capability at over voltages. Features

• The heart centre of the Surge Arrestor is a highly non-linear Zinc oxide discs also called Varistor capable of withstanding the surges.
• Housed in non-porous Porcelain or Silicone rubber housing along with other circuitry duly sealed.
• During passage of an electrical surges, the zinc discs allows the entire energy to earth by posing a very low resistance & instantaneously recovers to its original insulation property after passage of surge , getting ready for the next operation.
• Robust sturdy design in Porcelain housing with top Aluminium casted cap & bottom copper cap which totally seals the mechanism inside.
• The Surge Arrestor in Silicone rubber is comparatively light weight & UN-breakable, hydro phobic, resistant to UV rays, chemicals, ozone & corona. Further it offers excellent resistance to ageing under climatic conditions, electrical stresses & exhibits non-combustible properties.
• Can withstand rough handling or shipping. Reduced weight offers easy transportation.
• Both Porcelain & Silicone rubber arrestors can be supplied with mounting brackets.
• The flexible, thin sheds in Silicone rubber makes it possible to achieve highest creep age distances in comparatively shorter housing. In an unlikely event of a failure of a Surge arrestor due to excessive surges, porcelain housing may crack or burst in all directions but silicone rubber insulator may merely split open thereby preventing vandalism and damage to the adjacent equipments.
• The optional disconnecter can also be supplied which helps to disconnect ground lead from arrestor to avoid supply interruption & violent shattering of arrestor.

he Gang operated Air break switches are meant for outdoor application and are suitable for horizontal or vertical mounting. They are designed for satisfactory performance in harsh atmospheric conditions of high/low temperatures & humidity. Their primary function is to isolate a 11 kV, 3 Phase network. Asiatic manufactures the Air break switches in both Porcelain & Silicone rubber versions.

Features

* Single break type with 2 or 3 post insulators per pole depending on requirements of the customers.

* Can be used for single or three phase applications.

* Robust sturdy design with bottom MS channel of adequate dimensions which imparts requisite

strength.

* Self lubricating central bush bearing in 2 or 3 insulator design of air break switches allows easy

operation.

* Copper contacts are made of ETP grade high conductivity copper and are spring loaded for adequate contact pressure. The contacts are duly

plated to improve resistance to corrosion and offers a low resistance current path.* The Post insulators are available in Porcelain and Silicone Rubber with large creep age distance suitable for heavily polluted atmosphere and meets the stringent requirements of IS/IEC standards.

* All MS parts and Hardware are duly hot dip galvanized as per standard specifications which imparts long life to the switch.

* In 3 insulator design, tin plated braided Copper wire of adequate cross section is provided as per rating of the GOAB switch and depending upon customer requirements.

• Compact Design
• Base plate made up Electro Galvanized sheet steel
• duly powder coated in shade RAL-7032.
• Single piece Bus bar design.
• Fully shrouded design.
• Slots provided for easy mounting in enclosures or wall.
• Unique design provides for adjustment of height
• of PAN assembly.
• Supplied complete with neutral and earthing terminals
• in brass duly tin plated.
• Available in a wide range from 2 way to 18 ways.

• Vertical Design suitable for accommodating92 mm fixing center fuse carriers to BS 88.
• Copper links are manufactured from ETP gradehigh conductivity copper and are duly tin plated.
• We can manufacture the fuse way to exact customerrequirement in terms of copper cross section dependingupon current rating, inter link spacing or suitability to82.5 or 92 mm fixing centers.
• Mounted on paper based laminate having very highinsulation strength with equally good mechanical propertiesin terms of tensile, flexural, shear & impact strength.
• Insulated Inter phase barriers of DMC are provided betweenthe phases which not only prevents phase to phase faults butalso makes it impossible to insert fuse carriers betweendifferent phases.
• High tensile hardware of grade 8.8 provided on the cableside links offer ease of termination.
• Type tested at Central Power Research Institute -One of the premier testing institutes in India installedon our Feeder Pillars.

Asiatic manufacturers world class range of 25 kV composite insulators for Railways in 9 Tonne, Stay arm hook & Bracket tube configurations.FEATURES The use of PolymericSilicone Rubber base insulators have several advantages over the conventional ceramic insulators eg: light weight, unbreakable, hydrophobic, resistant to ozone & UV radiations, resistant to earth quake shocks , self deaning properties & resistant to vanda lism. Manufactured to I EC 61109 & RDSO specifications TUSPCOHEINSCOM1070. The external sheds are moulded from Silicone rubber on the latest state of the art injection moulding machinery from Desma Germany. The sthcone rubber is procured from world renowned companies across the world. The end fittings which are intended to connect to a supporting structure or to a conductor are made up of malleable cast iron BM:350 of IS 14329 or SG cast iron conforming to grade 400151 of IS 1865 iron and are duly Hot dip galvanized to a min of 750-10009m2as per RDSO specifications.

The Surge Arrestors are an indispensable protection devise which needs to protect a transformer against natural lightning & switching surges in a high voltage system. They are designed for satisfactory performance in critical atmospheric conditions of high/low temperatures & humidity. Asiatic offers the latest Gap less Metal oxide technology which is far superior than conventional systems being used previously in terms of vast improvement in VA curves & increased through current capability at over voltages. Features

• The heart centre of the Surge Arrestor is a highly non-linear Zinc oxide discs also called Varistor capable of withstanding the surges.
• Housed in non-porous Porcelain or Silicone rubber housing along with other circuitry duly sealed.
• During passage of an electrical surges, the zinc discs allows the entire energy to earth by posing a very low resistance & instantaneously recovers to its original insulation property after passage of surge , getting ready for the next operation.
• Robust sturdy design in Porcelain housing with top Aluminium casted cap & bottom copper cap which totally seals the mechanism inside.
• The Surge Arrestor in Silicone rubber is comparatively light weight & UN-breakable, hydro phobic, resistant to UV rays, chemicals, ozone & corona. Further it offers excellent resistance to ageing under climatic conditions, electrical stresses & exhibits non-combustible properties.
• Can withstand rough handling or shipping. Reduced weight offers easy transportation.
• Both Porcelain & Silicone rubber arrestors can be supplied with mounting brackets.
• The flexible, thin sheds in Silicone rubber makes it possible to achieve highest creep age distances in comparatively shorter housing. In an unlikely event of a failure of a Surge arrestor due to excessive surges, porcelain housing may crack or burst in all directions but silicone rubber insulator may merely split open thereby preventing vandalism and damage to the adjacent equipments.
• The optional disconnecter can also be supplied which helps to disconnect ground lead from arrestor to avoid supply interruption & violent shattering of arrestor.

click on above pictures to view enlarge view ! The Fuse Switches are suitable for use in Distribution Boards and Feeder Pillar Boxes. The fuse switches guarantee operating safety against accidental contact and has adequate breaking capacity. Due to their compact design & easy mounting, it is economical to use vertical type fuse switches in the LV Distribution boards. The overall dimension of the LV Distribution boards are reduced with their use and, therefore, the total cost of the switchgear is thus essentially cutdown. Characteristics. The fuse switch can be closed on the short circuit fault without danger to the operator. . High making and breaking capacity, utilization category AC22 as per IEC 408 and also high degree of short circuit making capacity. Body is made of high quality glass fibre-reinforced polyster (DMC) which is mechanically strong, heat resistant & self extinguishing type. The contacts are of copper silver plated, spring assisted provided with arc of chutes with adequate number of splitter plates for quenching the arc. . The downward connections are of electrolytic copper tin plated which are brought to one level at the bottom for cable termination with phase L1 on the left hand side. The hinged front cover is available with painted steel.

- See more at: http://asiatic.elobby365.com/ProductDetails.aspx?Id=72#sthash.tfZllUhk.dpuf

The Gang operated load break switches are meant for outdoor application and are suitable for horizontal or vertical mounting. They are designed for satisfactory performance in harsh atmospheric conditions of high/low temperatures & humidity. Their primary function is to isolate a 33kV, 3 Phase network.

FEATURES

* Single break type with 2/3 post insulators per pole. Quick make & break manual operation.

* Suitable for operation upto a altitude of 3000 m.

* Suitable for mounting at the top of a single or double steel pole.

* Used for single / three phase applications and suitable for operation on structures 6 meters or more above ground level with a pad lock facility.

* Robust sturdy design with bottom MS channel of adequate dimensions which imparts requisite strength.

* Copper contacts are made of ETP grade high conductivity copper and are spring loaded for adequate contact pressure. The contacts are duly plated to improve resistance to corrosion and offers a low resistance current path.

* All MS parts and Hardware are duly hot dip galvanized as per standard specifications which imparts long life to the switch.

* The Isolator is capable of withstanding the electrical & mechanical stresses induced during unlikely event of a short circuit.

* Sturdy operating mechanism is provided allowing easy operation 6 meters or above ground level with simultaneous operation of all the three poles making perfect electrical contact. Mechanical locking facility is provided for closed & open positions as required.

* The Post insulators are with min. creepage distance of 1150 mm suitable for heavily polluted atmosphere and meets the stringent requirements of IEC.

* The operating GI pipe provided along with the switch conforms to Medium Class as per IS 1239-1/ Eqvl and is 6000 mm in length.

* A choice of terminations can be provided to suit individual customer requirements.

It consists of manual/motor operated spring charged mechanism of stored energy type.

In the closed state of breaker, the closing spring can perform the duty operation. Facility is also available for hand charging the springs in the event of control supply failure. The closing spring is charged in less than 15 sec. Electrical Anti-pumping feature is also provided.

The mechanism is trip free and suitable for rapid Re-closing. The vacuum interrupters are capable of switching capacitive currents and small Magnetizing current.

Salient Features

Conforms to IS2147. IEC-62271-100, IEC- 60298 & IEC-60694.

Fully compartmentalized & internal arc

compliance as per standards.

Emergency tripping arrangement without

opening the breaker chamber front door.

Extensible & modular construction.

High reliability.

Re-strike free.

Horizontal isolation, horizontal drawn-out.

Self aligning type cluster contacts for robust design.

Stored energy type spring closing mechanism.

Fully interlocked for operational safety.

Asiatic manufactures a wide rang e o f L.V. Distribution Switch Boards / Feeder Pillars which are designed to meet the ndividual requirements of the customers.

3 phase, 4 wire, 50hz upto 500/660 volts

Upto ip55 protection class

Powder coated

Floor mounting or flange connected

Removable doors/covers

Modular design

Doors have removable lift off hinges with 130 to 180 opening angle and are fitted with epdm / neoprene seals with a range of locking system.

Large cable entry area from bottom through removable cable gland plates cubicle switch boards are supplied in different combination of fuse switch units and off-load isolators as required by the customer

Bus bars used are of electrolytic copper supported on non-hygroscopic dmc/hylam supports rigidly fixed on to the frame work. The bus bars are designed to withstand the desired faulty currents

Metering or protection to suit customer needs can be provided on demand

Emergency incomer provision can also be provided on request

Door defeat interlocks-optional

Available in crca / hr, galvanized mild steel or aluminum sheet en closures

The fabricated enclosures/housings undergo a process of chemical pretreatment as per laid down procedures before being powder coated.

Our standard range of fuse carriers are made from DMC which has high impact & di-electric strength and are suitable for BS-88 HRC fuse links. The FuseCarriers are available in 82.5 & 92 mm fixing centers in Finger grip, and Through grip options. The fuse carriers are also available in porcelain with 82.5mm fixing centers.

The Surge Arrestors are an indispensable protection devise which needs to protect a transformer against natural lightning & switching surges in a high voltage system. They are designed for satisfactory performance in critical atmospheric conditions of high/low temperatures & humidity. Asiatic offers the latest Gap less Metal oxide technology which is far superior than conventional systems being used previously in terms of vast improvement in VA curves & increased through current capability at over voltages. Features

• The heart centre of the Surge Arrestor is a highly non-linear Zinc oxide discs also called Varistor capable of withstanding the surges.
• Housed in non-porous Porcelain or Silicone rubber housing along with other circuitry duly sealed.
• During passage of an electrical surges, the zinc discs allows the entire energy to earth by posing a very low resistance & instantaneously recovers to its original insulation property after passage of surge , getting ready for the next operation.
• Robust sturdy design in Porcelain housing with top Aluminium casted cap & bottom copper cap which totally seals the mechanism inside.
• The Surge Arrestor in Silicone rubber is comparatively light weight & UN-breakable, hydro phobic, resistant to UV rays, chemicals, ozone & corona. Further it offers excellent resistance to ageing under climatic conditions, electrical stresses & exhibits non-combustible properties.
• Can withstand rough handling or shipping. Reduced weight offers easy transportation.
• Both Porcelain & Silicone rubber arrestors can be supplied with mounting brackets.
• The flexible, thin sheds in Silicone rubber makes it possible to achieve highest creep age distances in comparatively shorter housing. In an unlikely event of a failure of a Surge arrestor due to excessive surges, porcelain housing may crack or burst in all directions but silicone rubber insulator may merely split open thereby preventing vandalism and damage to the adjacent equipments.
• The optional disconnecter can also be supplied which helps to disconnect ground lead from arrestor to avoid supply interruption & violent shattering of arrestor.

he Gang operated Air break switches are meant for outdoor application and are suitable for horizontal or vertical mounting. They are designed for satisfactory performance in harsh atmospheric conditions of high/low temperatures & humidity. Their primary function is to isolate a 11 kV, 3 Phase network. Asiatic manufactures the Air break switches in both Porcelain & Silicone rubber versions.

Features

* Single break type with 2 or 3 post insulators per pole depending on requirements of the customers.

* Can be used for single or three phase applications.

* Robust sturdy design with bottom MS channel of adequate dimensions which imparts requisite

strength.

* Self lubricating central bush bearing in 2 or 3 insulator design of air break switches allows easy

operation.

* Copper contacts are made of ETP grade high conductivity copper and are spring loaded for adequate contact pressure. The contacts are duly

plated to improve resistance to corrosion and offers a low resistance current path.* The Post insulators are available in Porcelain and Silicone Rubber with large creep age distance suitable for heavily polluted atmosphere and meets the stringent requirements of IS/IEC standards.

* All MS parts and Hardware are duly hot dip galvanized as per standard specifications which imparts long life to the switch.

* In 3 insulator design, tin plated braided Copper wire of adequate cross section is provided as per rating of the GOAB switch and depending upon customer requirements.

• Compact Design
• Base plate made up Electro Galvanized sheet steel
• duly powder coated in shade RAL-7032.
• Single piece Bus bar design.
• Fully shrouded design.
• Slots provided for easy mounting in enclosures or wall.
• Unique design provides for adjustment of height
• of PAN assembly.
• Supplied complete with neutral and earthing terminals
• in brass duly tin plated.
• Available in a wide range from 2 way to 18 ways.

• Vertical Design suitable for accommodating92 mm fixing center fuse carriers to BS 88.
• Copper links are manufactured from ETP gradehigh conductivity copper and are duly tin plated.
• We can manufacture the fuse way to exact customerrequirement in terms of copper cross section dependingupon current rating, inter link spacing or suitability to82.5 or 92 mm fixing centers.
• Mounted on paper based laminate having very highinsulation strength with equally good mechanical propertiesin terms of tensile, flexural, shear & impact strength.
• Insulated Inter phase barriers of DMC are provided betweenthe phases which not only prevents phase to phase faults butalso makes it impossible to insert fuse carriers betweendifferent phases.
• High tensile hardware of grade 8.8 provided on the cableside links offer ease of termination.
• Type tested at Central Power Research Institute -One of the premier testing institutes in India installedon our Feeder Pillars.

Asiatic manufacturers world class range of 25 kV composite insulators for Railways in 9 Tonne, Stay arm hook & Bracket tube configurations.FEATURES The use of PolymericSilicone Rubber base insulators have several advantages over the conventional ceramic insulators eg: light weight, unbreakable, hydrophobic, resistant to ozone & UV radiations, resistant to earth quake shocks , self deaning properties & resistant to vanda lism. Manufactured to I EC 61109 & RDSO specifications TUSPCOHEINSCOM1070. The external sheds are moulded from Silicone rubber on the latest state of the art injection moulding machinery from Desma Germany. The sthcone rubber is procured from world renowned companies across the world. The end fittings which are intended to connect to a supporting structure or to a conductor are made up of malleable cast iron BM:350 of IS 14329 or SG cast iron conforming to grade 400151 of IS 1865 iron and are duly Hot dip galvanized to a min of 750-10009m2as per RDSO specifications.

The Surge Arrestors are an indispensable protection devise which needs to protect a transformer against natural lightning & switching surges in a high voltage system. They are designed for satisfactory performance in critical atmospheric conditions of high/low temperatures & humidity. Asiatic offers the latest Gap less Metal oxide technology which is far superior than conventional systems being used previously in terms of vast improvement in VA curves & increased through current capability at over voltages. Features

• The heart centre of the Surge Arrestor is a highly non-linear Zinc oxide discs also called Varistor capable of withstanding the surges.
• Housed in non-porous Porcelain or Silicone rubber housing along with other circuitry duly sealed.
• During passage of an electrical surges, the zinc discs allows the entire energy to earth by posing a very low resistance & instantaneously recovers to its original insulation property after passage of surge , getting ready for the next operation.
• Robust sturdy design in Porcelain housing with top Aluminium casted cap & bottom copper cap which totally seals the mechanism inside.
• The Surge Arrestor in Silicone rubber is comparatively light weight & UN-breakable, hydro phobic, resistant to UV rays, chemicals, ozone & corona. Further it offers excellent resistance to ageing under climatic conditions, electrical stresses & exhibits non-combustible properties.
• Can withstand rough handling or shipping. Reduced weight offers easy transportation.
• Both Porcelain & Silicone rubber arrestors can be supplied with mounting brackets.
• The flexible, thin sheds in Silicone rubber makes it possible to achieve highest creep age distances in comparatively shorter housing. In an unlikely event of a failure of a Surge arrestor due to excessive surges, porcelain housing may crack or burst in all directions but silicone rubber insulator may merely split open thereby preventing vandalism and damage to the adjacent equipments.
• The optional disconnecter can also be supplied which helps to disconnect ground lead from arrestor to avoid supply interruption & violent shattering of arrestor.

click on above pictures to view enlarge view ! The Fuse Switches are suitable for use in Distribution Boards and Feeder Pillar Boxes. The fuse switches guarantee operating safety against accidental contact and has adequate breaking capacity. Due to their compact design & easy mounting, it is economical to use vertical type fuse switches in the LV Distribution boards. The overall dimension of the LV Distribution boards are reduced with their use and, therefore, the total cost of the switchgear is thus essentially cutdown. Characteristics. The fuse switch can be closed on the short circuit fault without danger to the operator. . High making and breaking capacity, utilization category AC22 as per IEC 408 and also high degree of short circuit making capacity. Body is made of high quality glass fibre-reinforced polyster (DMC) which is mechanically strong, heat resistant & self extinguishing type. The contacts are of copper silver plated, spring assisted provided with arc of chutes with adequate number of splitter plates for quenching the arc. . The downward connections are of electrolytic copper tin plated which are brought to one level at the bottom for cable termination with phase L1 on the left hand side. The hinged front cover is available with painted steel.

- See more at: http://asiatic.elobby365.com/ProductDetails.aspx?Id=72#sthash.tfZllUhk.dpuf