Post Buy Requirement
AI
Mumbai, Maharashtra, India
Add Review

Other Products / Services

Control Panels

We manufacture a wide range of starter control panels, mcc panels, junction boxes. Panels are tailor made to suit the requirements of each customer and the site conditions.


We are distributors located in Mumbai for a wide range of Xylem Flygt submersible, dewatering, slurry, sewage pumps and submersible mixers. Flygt is the flagship brand of Xylem and the worlds no 1 submersible pump manufacturer. We have standard Flygt pumps in ready stock. Our service technicians ensure local service backup in India for these highly sophisticated Flygt pumps. Our repair workshop at Chiplun, India has facilities to repair Xylem Flygt submersible pumps and mixers.


View Complete Details

Top Entry Agitators

The new family of 4850, 4860 and 4870 Top-Entry Agitators is developed for vertical applications.


The basis for the development of the top-entry agitator range was to construct a range of reliable and robust machines capable of operating for lengthy time periods with very low power consumption, Life Cycle Cost (LCC) and a very insignificant environmental footprint without compromising the highest quality Flygt products are known for across a plethora of industries.

View Complete Details

Flygt Slow Speed Banana Blade Mixers

The Xylem Water Solutions 4410 and 4430 Flygt mixers have alternative motor capacities of up to 4.3 kW for 50Hz and 4.6 kW for 60Hz (6.2 hp). Together with different gear ratios and various propeller diameters of up to 2.5 m (98 3/8 in), optimised selections for each application can be provided.


The cast mixer is available with alternative coatings, depending on the application.


Low speed submersible mixers are used for moving large volumes of low viscosity liquids.


Typical applications include wastewater treatment plants, lagoons, water reservoirs, ice prevention, chemical processing plants, breweries and others.


For Service requirements, contact Ajay Industries.

View Complete Details

Spare Parts For Pumps

Flygt assures customers of an efficient supply chain and the ready availability of spare parts. We guarantee spare part availability up to 20 years after a product is out of production. And our guarantee of spare parts availability is 5 -20 years, depending on the product in operation.


The Flygt Active Seal System


The Active Seal system is introduced in a new generation of Flygt Plug-In seals, as well as in many Flygt double seal systems with separate single seals. This zero-leakage system prevents liquid from penetrating into the stator housing. The innovative design lets the inner seal act as a micro-pump, continuously preventing liquid from entering the motor cavity. This creates a pumping action through the rotation of the laser-cut pumping vanes on the seal face. At the same time the outer seal prevents leakage of the pumped media into the buffer chamber.

View Complete Details

Level Controller

A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device.


No wear, no maintenance! In sewage pumping stations, for ground water and drainage pumping - in fact, for most level control applications - the ENM-10 is the ideal solution.


The regulator casing is made of polypropylene and the cable is sheathed with a special PVC compound. The plastic components are welded and screwed together. Adhesive is never used. Impurities and deposits will not adhere to the smooth casing.


The level regulator is available in different versions, depending upon the medium in which it is to be used. As standard, the regulator can be obtained with 6, 13, 20, 30 or 50 metres(20, 42, 65, 100 or 167 ft) of cable for liquids with specific density between 0, 95 and 1, 10 g/cm; for other specific densities, the regulator is only available with 20 metres (65 ft) of the cable. The regulator can withstand up to 60 C (140 F).

View Complete Details

HSC Pumps

Double-suction, base-mounted Series HSC pumps are available in 2 through 10 sizes. Motor sizes through 300 HP. Flows to 6500 GPM and heads to 400 feet. Bronze-fitted construction with a maximum working pressure of 175 psig.


The HSC features internally self-flushing mechanical seals for maximum lubrication, debris removal and heat dissipation. The internally flushed seals allow for a shorter shaft for reduced deflection for longer seallife. Closed-end steel baseplate with full seam welds for strength and an open top for easy grouting.


The pump bearings and mechanical seals can be serviced without disturbing the upper casing half, piping connections or electrical motor connections. An ANSI-OSHA-compliant coupling guard shields the flexible coupler.

View Complete Details

DriPrime Pumps


  • A fully automatic self-priming pump.

  • Self-priming, completely from dry, with long suction lines.

  • Handles air/liquid mixtures.

  • Rapid priming and repriming in snore conditions.

  • Solids handling.

  • No moving parts in priming system; no need for floats; no complications.

  • Allows operation by unskilled personnel

  • Simple maintenance - can be performed in the field by one person.

  • For dewatering, sewage, sewage sludge, industrial slurries and drainage, and in scavenging situations.

  • Electric drive versions are available, either with built-in compressor or arranged for on-site or shop air to operate the priming system.




Compressed air is blown through a jet into a tapered tube to create a vacuum. Air from the pump casing and suction line is drawn in with the compressed air and exhausted to the atmosphere. Water replaces the air automatically priming the pump.

View Complete Details

Minicas II Relay

A number of condition monitoring sensors are available for the ITT FLYGT pump range.


Thermal switches for stator over temperature. CLS for water in oil detection. FLS for the detection of liquid in the stator housing. FLS10 for detection of liquid in the inspection chamber in the new midrange pump series, e.g. 3153, 3171, 3202 and 3301.

View Complete Details

Pump Controller




Flygt MAS 711 is a pump monitoring system suitable for large Flygt pump models, that is pumps equipped with a separate cable for monitoring. The primary task is to protect the pump in case of failure and to prevent faults from occurring. In case of alarm, MAS has capabilities to present useful information and to communicate it to a higher level system i.e. a central computer. MAS consists of two main parts to be mounted in an electrical cabinet: a Base unit and an Operator panel. There is also an optional Power analyzer. A Pump memory is mounted as standard in all large pumps.





View Complete Details

Subcab Cables




SUBCAB cables are specially made for reliable and long-life operation of Flygt products and are especially well suited for submersible operations. These cables feature, among others, a special tear and abrasion resistant compound with a much higher tensile strength compared to conventional standard cables





View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ajay (Ajay Industries)
  • 19-A, Ground Floor, Udyog Mandir Industrial Estate Bldg. No.1, Bhagoji Keer Marg,Mahim(West), Mumbai - 400016,Maharashtra
  • Share us via