AKASH Twin Lobe Rotary Compressors/Blowers are positive displacement units, whose pumping capacity is determined by size, operating speed and pressureconditions. It employs two Twin Lobe impellers mounted on parallel shafts, rotatingopposite direction within a casing closed at the ends by side plates. As the impellersrotate, air is drawn into one side of the casing and forced out of the opposite sideagainst the existing pressures. The differential pressure developed, therefore, dependsupon the resistance of the connected system. The Blowers, being positivedisplacement type, do not develop pressure within the casing but the dischargepressure depends upon the system resistance / back pressure. A pair of accurately machined alloy steel, hardened and ground timing gears maintainclearances between the impellers, during rotation. The air, thus delivered, is 100% OILFREE.

Positive displacement vacuum pumps/booster are used to create low vacuums. This type of vacuum booster, expands a cavity and allows the gases to flow out of the sealed environment or chamber. After that, the cavity is sealed and causes it to exhaust it to the atmosphere.

Our mechanical Vacuum Booster are positive displacement pumps with two figure eight shaped impellers rotating in opposite directions inside the casing. As each lobe of an impeller passes the blower inlet, it traps a quantity of air equal to exactly one fourth the displacement of the blower.

This entrapment occurs four times per revolution. The entrained air is forced around the case to the blower outlet. Timing gears accurately position the impellers in relation to each other to maintain the minute clearances so vital to the high volumetric efficiency of the pump.

Description

Acoustic hood covers the complete blower and motor arrangement. Its fully sound proof cabin decreases the overall sound of the system to the accepted norms as per IS specifications. Provision of exhaust fan decreases heat in the chamber and fixing of the anchor bolts results in rigid base to the acoustic hood. This is a very effective enclosure to provide noise reduction of 15 to 20 dBA or more, to comply with international noise level & is available for all blowers and models.

Sludge dewatering is the process of separation of components of solid and liquid sludge to minimize the sludge disposal.

Sludge dewatering equipment is not intended to treat the sludge or liquid but; it only separates the liquid components & solid components so it will get easier & cost-effective to handle the separate phases of the disposal. Once the Final sludge has been dewatered, then the liquid is treated in ETP/STP & solid sludge is disposed.

The main purpose of the Sludge dewatering machine is to minimize handling and disposal. Sludge dewateringpress is the most cost-effective method of dewatering and hence helps to sustain the environmental objectives of the company.

1) With In 24-72 Hours Service Provider

From product specifications to engineering aspects, we give you full access to all information through our user-friendly Support section. We offer a complete 24/72 Service to ensure that you gain complete satisfaction. Our support team at AKASH Blowers can monitor your requirement 24/7 and respond to any issues as they arise. At AKASH Blowers, we have developed a client specific service that allows for ongoing support, maintenance as well as consultative guidance. Our Global service is aimed for providing the customers with best technical support.

2) Others Make Service Provider

We, AKASH Blowers, are dedicated to offering world-class industry standards service for our customers. We are having a group of skilled teams to provide various ranges of services and operations across the globe. We can provide you with a 100% professional service of other brand blowers. Our experts do repairs and inspections of high vacuum boosters, centrifugal blowers and much more. We are having huge years of experience in this field in handling blowers on all models and makes. Our service can increase the lifespan.