Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of Angle Valve and Thermostatic Thermal Expansion Valve.
Amanuallyoperatedvalvewithitsoutletopeningorientedatrightanglestoitsinletopening;usedforregulatingtheflowof afluid or gasin apipe.
It is made in brass material and is robust in construction.
Avalveforcontrollingtheflowof aliquidorair;thefluidleavesatrightanglestothedirectioninwhichitentersthevalve.
Athermal expansion valve(often abbreviated asTEV, TXV, orTX valve) is a component inrefrigerationandair conditioningsystems that controls the amount of refrigerant flow into the condenser thereby controlling thesuperheatingat the outlet of theevaporator. Thermal expansion valves are often referred to generically as "metering devices".
FunctionExpansion valves are flow-restricting devices that cause a pressure drop of the working fluid. The valve needle remains open during steady state operation. The size of the opening or the position of the needle is related to the pressure and temperature of the evaporator. There are three main parts of the expansion valve that regulate the position of the needle. A sensor bulb, at the end of the evaporator, monitors the temperature change of the evaporator. This change in temperature creates a change in pressure on the diaphragm.
For example, if the temperature in the evaporator increases, the pressure in the diaphragm increases causing the needle to lower. Lowering the needle allows more of the working fluid into the evaporator to absorb heat. The pressure at the inlet of the evaporator affects the position of the needle and prevents the working fluid from flowing back into the compressor. Since the pressure before the valve is higher than the pressure after the valve, the working fluid naturally flows into the evaporator. The pressure at the inlet of the evaporator acts on the diaphragm. There is also a spring providing a constant pressure closing the valve needle. The spring constantly restricts the amount of working fluid entering the evaporator.
The pressure spring can be adjusted to increase or decrease pressure based on temperature needs. The pressure created by the spring acts on the opening of the valve. When the pressure of the sensor bulb acting on the diaphragm is greater than the combined pressure of the evaporator and spring, the valve opens to increase the flow rate of the working fluid. An increase of flow rate lowers the temperature of the evaporator and allows for more heat absorption.
Alfacool use reputed makehermostatic(Thermal) expansion valvein his chilling plant for better performance ie. Danfos, Emerson etc.
We also supply as spares of different make and sizes.
Arun Saini (ALFACOOL ENGINEERING CO.)
F-292, PHASE-8, FOCAL POINT, OPP. HERO CYCLE, CHANDIGARH ROAD, LUDHIANA, Punjab - 141010
Share us via
