Our Product / Services
Our product range contains a wide range of Food Product Testing, Miscellaneous Testing, LED and Luminaries Testing, FERTILIZER/ NEUTRALIZER TESTING and Non-Destructive Testing
Alpha Test House is approved and authorized for food testing from FOOD SAFETY AND STANDARDS AUTHORITY OF INDIA (FSSAI). Food Safety and Standards Authority of India is an independent statutory body which has been set up under the Food Safety Standards Act (FSSAI) 2006, and it is under the administrative control of the Ministry of Health and Family Welfare, Government of India.
What you eat affects your health and growth.
Food testing is important for safe and quality food products. Today, the food industry is increasingly subjected to competition. Therefore, food testing analysis is mandatory in compliance with food safety regulations to ensure healthy lifestyle. Contamination in the food products can also cause damage to the brands reputation. So, food testing, food packaging testing, packaged food testing are very much important to avoid further effects.
Alpha Test House, accredited, full service analytical laboratory, specializes in microbiological analysis for the food, beverage and Environmental industries. Food safety is an integral part of the production of all foods and the shared responsibility of all segments of the supply chain. In recent times there has been increased awareness for the need to evaluate the food safety practices in the production of agricultural products. We have extensive experience and the analytical capability in:
FOOD PRODUCT ANALYSIS
Dairy Products Testing:
Dairy products testing includes analysis for milk, cheese, other dairy products, as well as products containing ingredients derived from milk, cheese, and other dairy products. These tests are done to determine ash, alkalinity, dispensability, Fat, milk fat, Lactose, Milk Solids, Non fat, moisture, minerals, Microbiological tests, Protein by Kjeldhal method, Combustion, solids (total) in milk, titrable acidity and vitamins.
Organic Food Testing:
Organic food is supposed to be free from synthetic chemicals and governed with strict guidelines. USFDA Certified is the label to look for when spending extra money on organic foods. Organic food does not mean chemical-free, it just means it is grown without the use of synthetic pesticides and fertilizers. The organic food testing helps in finding out about the presence of these pesticides and fertilizers.
Nutritional/Food Labeling:"Nutritional Facts" label was introduced as part of regulations in many countries. But on September 19, 2008, The Ministry of Health and family welfare had mandated packaged food manufacturers to declare nutritional information on their product labs. The label informs consumers of the nature, contents, quantity and quality of the food. It also provides information on the source of the food.
Ready to Eat Food Labeling:
Food labeling offers a great deal of information on most packaged foods. The label offers complete, useful and accurate nutritional information. The government encourages food manufacturers to improve the quality of their products and help the consumer make healthier food choices. The consistent format helps consumer to directly compare the nutritional content of various foods.
Shelf Life Estimation:
The shelf life of a food can be defined as the time period within which the food is safe to consume and/or has an acceptable quality to consumers. The shelf life of a product begins from the time the food is prepared or manufactured. Its length is dependent on many factors including the types of ingredients, manufacturing process, type of packaging and how the food is stored. It is indicated by labeling the product with a date mark. Shelf Life estimation test are done by microbiological examination, chemical, physical and sensory evaluation.
Fatty Acid Composition Analysis:
Current interest in fatty acids and trans-fatty acids in food materials has been increasing. Fatty acid is an organic acid found in fats, oils, and lipids. It can be classified according to chain length, short chain (2-4 carbons), middle chain (5-10 carbons), and long chain (more than 11 carbons). The tests for fatty acids are performed to obtain its complete profile.
Vitamins in Food:
Vitamins are substances that our body needs to grow and develop normally. There are 13 vitamins our body needs. They are vitamins A, C, D, E, K and the B vitamins (thiamine, riboflavin, niacin, pantothenic acid, biotin, vitamin B-6, vitamin B-12 and folate). Accurate vitamin testing is essential to ensure that declared levels are correct, especially if a company is making a claim about a product. Our laboratory provides the latest, most reliable and sensitive techniques to analyze for a wide range of vitamins.
Alpha Test House has built a testing facilities for LED & Luminaries Testing which is certified by ISO 9001:2015 & accredited by NABL & approved by BIS. The Laboratory is also providing BEE Regulator accepted Testing. The Objectives of BEE Standards & Labeling Program is to provide the consumer an informed choice about the energy saving and thereby the cost saving potential of the marketed household and other equipment like LED LAMPS, Color TV, Electric Geysers, Computer (Notebook/Laptops), Office Equipments (Printer, Copier, Scanner) etc.
The laboratory has installed a latest & highest reliable & branded Goniophotometer, Spectrophotometer, Integrating Sphere, LED Lamp, Led Luminaries, Led Control gear Test Instruments, CFL Test Instruments, Photometer and Colorimeter, Electrical Safety Testing, Environmental Testing, AC and DC Power Supply and etc.
The laboratory also provide Ingress Protection Testing at a competitive price including Safety testing, Vibration testing, LM79 etc.
Many products undergo a variety of tests before they reach the market. These tests include product safety testing, electromagnetic compatibility, vibration testing and many others. Products used indoors or outdoors are often tested against "ingress, " that is, the product's resistance to water, dust and foreign objects. There are several reasons for ingress testing, including safety, functionality and product marketing. We provide Ingress Protection Testing in very competitive price including Safety testing, Vibration testing, LM79 etc.
Following products are covered under Compulsory Registration Scheme:
|
Sl. No. |
Product |
Indian Standard number( IS No.) |
|
1 |
SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES |
IS 16102(Part 1):2012 |
|
2 |
DC OR AC SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
IS 15885 (Part 2/Sec13) 2012+A1: 2015 |
|
3 |
FIXED GENERAL PURPOSE LED LUMINAIRES |
IS 10322(Part 5/Sec 1):2012 |
|
4 |
Recessed LED Luminaries |
IS 10322 (Part 5/Section 2) : 2012 |
|
5 |
LED Luminaries for Road and Street lighting |
IS 10322 (Part 5/Section 3) : 2012 |
|
6 |
LED Flood Lights |
IS 10322 (Part 5/Section 5) : 2013 |
|
7 |
LED Hand lamps |
IS 10322 (Part 5/Section 6) : 2013 |
|
8 |
LED Lighting Chains |
IS 10322 (Part 5/Section 7) : 2013 |
|
9 |
LED Luminaries for Emergency Lighting |
IS 10322 (Part 5/Section 8) : 2013 |
Luminaries- Particular Requirements- Fixed General purpose Luminaries:
|
Specific tests performed |
Standard against which tests are performed |
|
Marking |
Cl. 6 of IS 10322 (Part5/Sec 1): 2012/ IEC 60598-2-1: 1979+ A1: 1987 Cl. 1.5 of EN 60598-2-1: 1997 |
|
Construction |
Cl. 7 of IS 10322 (Part5/Sec 1): 2012/IEC 60598-2-1: 1979+ A1: 1987 |
|
Creepage Distance and Clearances |
Clause 8 Of IS 10322 (Part5/Sec 1): 2012/IEC 60598-2-1: 1979+ A1: 1987 |
|
Provision for Earthing |
Clause 9 of IS 10322 (Part5/Sec 1): 2012/IEC 60598-2-1: 1979+ A1: 1987 |
|
Terminals |
IS 10322 (Part5/Sec 1): 2012 Clause 10 IEC 60598-2-1: 1979+ A1: 1987 |
|
External and Internal Wiring |
Clause 11 IS 10322 (Part5/Sec 1): 2012/IEC 60598-2-1: 1979+ A1: 1987 Clause 1.10 of EN 60598-2-1: 1997 |
|
Protection Against Electric shock |
Clause 12 of IS 10322 (Part5/Sec 1): 2012/IEC 60598-2-1: 1979+ A1: 1987 Clause 1.11 of EN 60598-2-1: 1997 |
|
Endurance Tests and Thermal Tests |
Clause 13 of IS 10322 (Part5/Sec 1): 2012/IEC 60598-2-1: 1979+ A1: 1987 Clause 1.12 of EN 60598-2-1: 1997 |
|
Resistance to Dust and Moisture |
Clause 14 of IS 10322 (Part5/Sec 1): 2012/IEC 60598-2-1: 1979+ A1: 1987 |
|
Insulation Resistance and Electric Strength |
Clause 15 of IS 10322 (Part5/Sec 1): 2012 /IEC 60598-2-1: 1979+ A1: 1987 |
|
Resistance to Heat, Fire and Tracking |
IS 10322 (Part5/Sec 1): 2012 Clause 16 IEC 60598-2-1: 1979+ A1: 1987 |
Safety of Lamp Control gear Part 2: Particular Requirement Section : 13 d.c. or a.c. Supplied Electronic Control gear for LED Modules
|
Specific tests performed |
Standard against which tests are performed |
|
Marking |
IS 15885 (Part 2/ Sec 13): 2012 IEC 61347-2-13, Ed2:2014 EN 61347-2-13: 2006,Clause No: 7 |
|
Protection against accidental contact with live parts |
IS 15885 (Part 2/ Sec 13): 2012 IEC 61347-2-13, Ed2:2014 EN 61347-2-13: 2006,Clause No: 8 |
|
Terminals |
IS 15885 (Part 2/ Sec 13): 2012 IEC 61347-2-13, Ed2:2014 EN 61347-2-13: 2006,Clause No: 9 |
|
Provision for Protective Earthing |
IS 15885 (Part 2/ Sec 13): 2012,IEC 61347-2-13, Ed2:2014 EN 61347-2-13: 2006,Clause No: 10 |
|
Moisture Resistance and insulation |
IS 15885 (Part 2/ Sec 13): 2012 IEC 61347-2-13, Ed2:2014 EN 61347-2-13: 2006,Clause No: 11 |
|
Electric Strength |
IS 15885 (Part 2/ Sec 13): 2012 IEC 61347-2-13, Ed2:2014 EN 61347-2-13: 2006,Clause No: 12 |
|
Fault conditions |
IS 15885 (Part 2/ Sec 13): 2012 IEC 61347-2-13, Ed2:2014 EN 61347-2-13: 2006,Clause No: 14 |
|
Construction |
Clause No: 16 of IS 15885 (Part 2/ Sec 13): 2012/ |
|
Creepage Distance and clearance |
Clause No: 17 of IS 15885 (Part 2/ Sec 13): 2012 |
|
Screws, current- carrying parts and connections |
Clause No: 18 of IS 15885 (Part 2/ Sec 13): 2012/ IEC 61347-2-13, Ed2:2014 Cl. 19EN 61347-2-13: 2006, |
|
Resistance to heat, fire and tracking |
Clause No: 19 IS 15885 (Part 2/ Sec 13): 2012/Clause No: 19 IEC 61347-2-13, Ed2:2014 |
Self-Ballasted LED Lamps For general purpose Lighting Services ,Safety Requirements IS:16102(Part 1):2012, IEC 62560:2011+A1:2015
|
Specific tests performed |
Standard against which tests are performed |
|
Marking |
Cl. 5 of IS:16102 |
|
Interchangeability |
Cl. 6 of IS:16102 |
|
Protection Against accidental Contact With Live Parts |
Cl. 7 of IS:16102 |
|
Insulation Resistance and Electric Strength Test After Humidity |
Cl. 8 of IS:16102 |
|
Mechanical Strength |
Cl. 9 of IS:16102 |
|
Cap Temperature Rise Test |
Cl. 10 of IS:16102 |
|
Resistance To Heat |
Cl. 11 of IS:16102 |
|
Resistance to Flame and Ignition |
Cl. 12 of IS:16102 |
|
Fault Conditions |
Cl. 13 of IS:16102 |
|
Creepage Distance And Clearances |
Cl. 14 of IS:16102 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes-safety requirements for portable sealed secondary cells, and for batteries made from them ,for use in portable applications IS 16046:2015,IEC 62133:2012
|
Specific tests performed |
Standard against which tests are performed |
|
Continuous low-ratse charging |
Cl. 7.2.1 & Cl. 8.2.1 |
|
Vibration |
Cl. 7.2.2 & 8.2.2 |
|
Molded case Stress |
Cl. 7.2.3 & 7.2.4 |
|
Temperature cycling |
Cl. 7.2.4 |
|
Incorrect installation |
Cl. 7.3.1 |
|
External short circuit |
Cl. 7.3.2 & 8.3.2 |
|
Free Fall |
Cl. 7.3.3 & 8.3.3 |
|
Mechanical shock(crash hazards) |
Cl. 7.3.4 |
|
Thermal abuse |
Cl. 7.3.5 & 8.3.4 |
|
Low pressure |
Cl. 7.3.7 |
|
Overcharge |
Cl. 7.3.8 & 8.3.6 |
|
Force discharge |
Cl. 7.3.9 & 8.3.7 |
Alpha Test House test and analyze dry, liquid, and gas based fertilizers, herbicides and pesticides, organic manure. We can ensure that your product meets all government and industry regulations as well as provide further testing and product development services.
Our Group of experienced chemists can assist with product testing and development, reverse engineer a product's formulation, provide the necessary regulatory testing, perform failure analysis services, and help with litigation support services.
Alpha Test House chemical analyst tests your fertilizer, herbicide, or pesticide product for its "Quantitative and Qualitative analysis, Major and trace elemental analysis, Quantitative and Qualitative analysis". Using product reformulation we can recreate and modify your original formulations to develop or redesign your company's product.
Our chemists can also analyze for specific chemicals, banned ingredients, and perform a wide variety of other advanced analytical tests.
Accuracy is assured with in-house quality control programs as well as by performance monitoring through participation in industry and government sponsored performance evaluation studies
We provide accurate, cost effective fertilizer testing services in India accordance with international standards to help you gain a competitive advantage. Alpha Test House provides the complete range of analytical testing procedures to meet the requirements of any fertilizer production through the end user.
The company headquartered is in Delhi, India. The laboratory maintained the modern analytical instrument, High-tech sampling procedure, Lab Information Management software (LIMS) and expertise in classical wet chemical analysis.
Our List of Fertilizer & Manure Testing Services:
(Quantitative and Qualitative analysis, Major and trace elemental analysis & Chemical and physical analysis )
|
Feed grade |
Ammonia |
|
Liquid fertilizer |
Ammonium nitrate |
|
Phosphate fertilizer |
Sulfate Sulfur |
|
Urea |
Ammonium Sulfate |
|
Phosphate rock |
Particle Size |
|
UAN solution |
Available Phosphorous |
|
Potash |
Organic Manure |
|
Urea |
C:N ration |
Alpha Test House offers a wide range of miscellaneous analysis. Please contact our laboratory to discuss about methods which are not listed below for your investigation. The below is our list of products analyzed in miscellaneous analysis:
Industrial ChemicalFertilizersPaint, Emus lion, Varnish, Road Marking Paint etc.PVC PipesHDPE PipeRubber & PolymerCoal & CokeThird Party Inspection etc.Alpha Test House Provides Testing facilities for ISO 22241-1:2006: Diesel engines - NOx reduction agent AUS 32- Part 1
In order to protect the environment keeping the air quality as clean as possible , exhaust emissions regulation around the world have been strengthened considerably. In motor vehicles with diesel engines, particulate matter (PM) and nitrogen oxide (NOx) emission are the main concern, and efforts have been focused on the development of technology which can reduce them effectively with minimum fuel economy penalty. Selective catalytic reduction (SCR) converters using urea solution as the reduction agent is considered to be a key technology for reducing NOx emissions. The quality of the urea solution used for that technology needs to be specified to ensure reliable and stable operation of the SCR converter systems.