Write a Review
Our Products
We offer the best product range of Bw Industrial Cable Gland - 2 Part, Bw Industrial Cable Gland - 3 Part, G Type Gland, Aerial Rod and Split Bolt Connectors - Round.
We manufacture and Copper Braid Bond. These flexible Copper Braid Bond are used for bonding metal gates, doors, fences etc. Other lengths and sizes are available on request.
Other lengths and sizes are available on request for Copper Braid Bond
Copper Braid Bond Braids made of many copper wires are also sometimes used for flexible electrical connections between large components. The numerous smaller wires comprising the braid are much more resistant to breaking under repeated motion and vibration than is a cable of larger wires.
In electrical and electronic cables, braid is a tubular sheath made of braided strands of metal placed around a central cable for shielding against electromagnetic interference. The braid is grounded while the central conductor or conductors carry the signal.
Flexible electrical connectors solve high-voltage connectivity problems created by vibration from generators and transformers. When used as the initial connector from vibration-producing equipment to a power distribution network, flexible connectors (or flexible braided jumpers) isolate the main electrical grounding bus work from the cause of vibration.
And while flexible braided connectors are more expensive than using copper bus bar, flex braid returns the investment by cutting the potential cost of down time, maintenance and energy loss created by loose electrical connections.
In addition to the positive aspects of flex braid, the most advantageous feature of this versatile connector is evident in its name – flexibility. A cable or cable harness with the same current-carrying ampacity is much stiffer and unwieldy. A cable that will carry 750 amps is fairly easy to work in 20-foot lengths, but bending a shorter piece and routing it around other objects becomes very difficult. In addition to their stiff, unwieldy nature, cables are rigid and transmit vibration.
Even though many of our products are standard items, we also make special tailor made products made exactly to the requirements of our customers.
|
Size |
Hole |
Hole |
Unit |
Pack |
Part |
|
25 x 3.5 |
200 |
11 |
0.04 |
10 |
BFE 200 |
|
300 |
0.07 |
BFE 300 |
|||
|
400 |
0.15 |
BFE 400 |
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Steel discs are very important. The disc acts timing device to allow the welding powder to heat to proper temperature, the disc away allowing the molten copper to a point where it would weld metal toenter the weld gravity before ignition. One Metal is must for every shot
Two Brush Required:1) Soft Brush Its used to Clean Mould Weld Cavity because its shape is very sensitive and there should not be any damage while using Brush, so we recommend to use Soft Brush to Clean Mould Weld Cavity2) Hard Brush Its used to clean other section of MouldWe recommend a Pair of Brush for 50 Connection
Ujjwal Shah (Amiable Impex)
1, Kiranbulding, Kiran Neela Rashmi CHSL, Opp. Swami Narayan Mandir, Premnagar, Borivali - West Mumbai - 400092, Borivali West, Maharashtra
Share us via
